Gang Drilling Machine

WMW FRITZ HECKERT BKR 32 x 4 AI

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Nodjy Icbaspfx Aphewk

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Njdpfx Apodrtalehewk essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Nwsdpfx Apjhz Ua Sshek

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Nwjdevz Snkepfx Aphsk Mechanical fume extraction

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm Nsdpfxju Et Nbo Aphjwk - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Nwjdpew Hfzasfx Aphok Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: Nwodpfx Apju N A Uuohek - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Year of construction: 1981, condition: used, pressure 40 t distance between columns 600 mm stroke 160 mm table-size 560 x 400 mm dayligth 360 mm ram hole 40 H 7 DIN 810 mm oil volume 500 l return speed 200 mm/sec die cushion hydr. pressure/stroke 60 capacity of ejector 25 t total power requirement 15 kW dimensions of the machine ca. 1.44 x 0.95 x 2.54 m pressing speed 27 mm/sec Nwsdpfob U Hw Tex Aphjk return speed 200 mm/min

Condition: good (used), Year of construction: 2002, functionality: fully functional, 2-axis machine. Njdpfxjrx R S Uo Aphswk Largest turning diameter: 1000 mm Largest swing diameter: 1250 mm Vertical slide stroke: 1000 mm Stroke horizontal slide: 1250 mm Spindle head according to DIN 55026: Size A 15 Spindle Ø in front bearing: 240 mm Drive 100% / 40% ED: 4.4 / 5.5 kW Speed range 1: 6.3 90 224 rpm Speed range 2: 25 360 900 rpm Feed rates: max. 14000 mm/min Rapid traverse: max. 20000 mm/min Turret head: 4 stations Round shank: Ø 60 mm according to DIN 69880 Connected load: 110 KW Weight: 25 tons The machine is still under power. Inspection possible at any time by arrangement. Price ex location. We will be happy to enquire about the costs for free truck.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Nedpfxstpuh Aj Aphowk Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.