Used Marposs Stromversorgung / Netzteil for sale (164)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL Gksdpjuxfu Njfx Akasb -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Godsvdk N Ejpfx Akajkb Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW Gkodpfxsuwv H Ho Akajb -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 250 mm grinding length 1000 mm centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Gjdpfx Aod Ih Egskaokb delivery: completely overhauled including a new control Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 1984, grinding diameter 630 mm grinding length 3000 mm workpiece weight 2500 kg grinding wheel diameter 750 mm voltage 400 V Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Godpfoyyqhxex Akaekb Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Gksdpfsx I A Hpsx Akajb Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Year of construction: 1964, condition: used, -WKG 429- We are offering a grinding machine from Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm Grinding wheel Ø: Shrink-fit arbor 475/254 Grinding wheel Ø: Plain arbor 457/357 Weight: 8t Grinding method: Segment grinding Segment grinding heads: 2 pcs Accessories: Dressing device Water tank with paper band filter Gkodpfsg Nt Dbjx Akaob Marposs control

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Gkedpfx Akjg Nt A Eeasb Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Gkjdjykpg Hopfx Akaob Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, Year of construction: 2000, x-travel 900 mm y-travel 800 mm z-travel 970 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 12000 U/min rapid traverse 50 m/min Gkodpoyqu H Esfx Akajb Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 20 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min Gedpfoyqu Naex Akajkb rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light Gkjdpfjx N I Aljx Akajb - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile Gkedpfertr Eaex Akajb 30 Degree 30" Wheel Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Gjdpjrtrxxefx Akaekb Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm