Used Meierling Tipper Semi-Trailer for sale (18,397)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: red, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, container locks: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, with the longer version of the pivot pins for the container locking mechanism. 24 tons. Two-stage support jacks, single-person operation, with straight lower part, without lateral thrust compensation. Outrigger plates with holder, side impact protection, underrun protection (aluminum). With anti-splash flaps according to EC, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam. Hose racks approx. 4500 mm long (including hose box) for hose pipes 2 x DN 200 on the outside + 2 x DN 160 in the center, hose box (stainless steel) at the rear, 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes, stainless steel grounding plate at the rear on the right-hand side of the frame, with international grounding sticker on the frame, steps at the rear right on the underrun protection, at the rear on the right-hand side on the main beam, tread plate approx. 260 mm long and 300 mm wide. Axles + Suspension SAF disc brake axles, "axle / chassis laser-measured" reduces tire wear and fuel consumption, axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight. Air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, activation "3x brake" (starting aid is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h). Braking system 2-line compressed air braking system, color-coded line routing for easy servicing. Spring brake parking brake. 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve, vehicle - driving stability system. Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installed. Wheels and tires 385/65 R22.5", manufacturer's choice, steel rims, factory silver. Electrical system Cgedpfjy Tvphox Aiaeu 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole socket at the front, without connection cable. Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution is possible). This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas" ("end-cross-member-load-transfer areas"). Country of registration / Signage Warning sign according to ECE - 70, approval according to ADR according to 9.1.1.2 of the ADR, EX/II, EX/III, / registration certificate for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for sub

Condition: used, empty load weight: 3,240 kg, maximum load weight: 9,760 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 10/2014, loading space length: 5,100 mm, loading space width: 2,410 mm, loading space height: 450 mm, suspension: steel, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, loading ramps can be attached, front support, rear support, swing sides, height-adjustable drawbar. Body: three-way tipper trailer with loading ramps. Archive images! 2x Gigant axles! Loading height approx. 950 mm! Loading ramps available at an extra charge of €1,000.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Csdpfxsy T Sflo Aiaogu

Condition: used, empty load weight: 3,510 kg, maximum load weight: 6,990 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 03/2015, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, front support, rear support, swing-out tailgates, height-adjustable drawbar. Body: 3-sided tipping trailer, 2x BPW axles, galvanized chassis, height-adjustable drawbar! A rear tailgate can be purchased for an additional €1,000.00 net! Loading height approx. 970mm! Matching ramps available for an additional charge of €990.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Cgjdpfeyyxg Aex Aiasu

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 970 mm, Year of construction: 2026, Equipment: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 TRIDEM TANDEM DUMP TRUCK - Dump body 5,000 x 2,420 mm (external dimensions) - Side board height 500 mm - Floor made of fine-grain steel S 420 MC, 4 mm thick - Side boards laser-welded from fine-grain steel, front wall fixed - 2 pairs of folding lashing eyes with lashing capacity LC 5000 daN, each pair recessed into the steel floor at the front and rear. 4 pairs of folding lashing eyes with LC 3000 daN recessed into the steel floor. - Mesh hooks integrated on each side and at the rear in the side board supports and in the front wall. - Reinforced and certified body according to EN 12642 XL - 2 LED reversing lights on the rear of the trailer - Aluminum loading ramps without a track for rubber-tired and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm Codpfx Asy S Nwvoiaogu - Plastic toolbox - Aluminum compressed air tank - BPW, with S-cam brake - Tires 235/75R17.5 Suitable for a coupling height of approximately 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,300 kg, maximum load weight: 33,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2020, Equipment: ABS, sem lecitrailer skeleton chassis container carrier, 3 disc axles with 1st liftable and 3rd steering, abs, air suspension, accommodates containers from: 1 x 20 bil + 2x20 + 1x30 + 1x40 + 1x45 + swap bodies uic from 6.15m to 13.60m and hi cube, complete adr, galvanized chassis with front crosspiece extension, year 2020, good condition, INTERDRIVE SRL-PARMA DEALER Cedpswku Idefx Aiaogu

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Cgsdjyn Uhkspfx Aiaju Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, maximum load weight: 2,564 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 01/2024, loading space length: 3,015 mm, loading space width: 1,850 mm, loading space height: 345 mm, total width: 4,049 mm, total height: 2,015 mm, A4 Gw26GA00043 3,500 kg, inertia-braked, high-bed trailer, electric pump, aluminium cladding, rear pendulum tailgate. Subject to errors and prior sale, vehicle not prepared. Cgedpsym Ihuofx Aiaju

Condition: used, maximum load weight: 6,720 kg, overall weight: 9,900 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 5,050 mm, loading space width: 2,330 mm, loading space height: 400 mm, total width: 2,500 mm, total height: 2,700 mm, Equipment: * Three-way tipper * Internal dimensions: 5,050 mm x 2,330 mm x 400 mm * Height-adjustable towing eye * Leaf spring suspension * 40 mm towing eye / 50 mm option available * Lashing eyes * Payload: 6,720 kg according to registration * TÜV (roadworthiness inspection) due Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously stocks around 200 vehicles, spanning vans, commercial vehicles, and construction machinery! We regularly offer attractive financing options at special rates. Upon request, we are happy to provide you with a tailored quote! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our general offer does not include a new TÜV inspection. Cjdpfx Aijykm Hwjasgu Delivery of your "new" commercial vehicle by our external partners is available at an extra cost. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not represent guaranteed characteristics. The seller assumes no liability/warranty for typographical or transmission errors. Listed equipment should be verified separately if necessary. Subject to errors and prior sale.

Condition: used, maximum load weight: 13,443 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2017, next inspection (TÜV): 06/2028, Year of construction: 2017, Internal vehicle no.: MK200155 German vehicle Available immediately at our yard in Kaufungen - Kassel More info: Luis Lucena Unladen weight: 4,557 kg Max. permissible weight: 18,000 kg Errors excepted We are happy to accept your used vehicle as part exchange. Financing possible directly through us. Cgsdpfx Aisycaq Tsaeu GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 4,430 kg, maximum load weight: 13,570 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 09/2016, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2016, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40577 Schwarzmüller, 3-way tipper * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem trailer * Air connection coupling head (red + yellow) * 15-pin connection plug * Lifting and lowering device * Swing tailgate Codpfjyicldex Aiajgu * Suspension: Air * Gross weight: 18,000 kg * Unladen weight: 4,430 kg * Payload: 13,570 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume: 11 m³ * Pallet spaces: 12 * Additional photos can be sent on request Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing options * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Feel free to contact our qualified staff—we are happy to advise you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 08/2018, next inspection (TÜV): 09/2026, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2018, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40575 Schwarzmueller, 3-way tipper trailer * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Tandem axle trailer * Air supply coupling heads (red + yellow) * 15-pin connector plug * Lifting and lowering device * Swing tailgate * Next inspections (MOT / Emissions): 09/2026 * Suspension type: air * Gross vehicle weight: 18,000 kg * Unladen weight: 4,150 kg * Payload: 13,850 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume*: 11 m³ * Pallet spaces: 12 * Further photos available on request Disclaimer: Subject to prior sale, changes, and errors. More photos and videos can be found on our website. Our comprehensive services include, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Arrangement of export license plates / customs plates * Vehicle refurbishment: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Consult our trained specialists – we are happy to advise you. Cgjdpsyicv Njfx Aiasu

Condition: used, functionality: fully functional, empty load weight: 7,990 kg, maximum load weight: 28,010 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2023, Object number #30572 Cargofloor 10 mm moving wall pneumatic door locking Jost axles disc brakes 2x lift axle tyres 385/65 R 22.5 body inside dimensions: 13,450 x 2,450 x 2,700 mm portal doors rolling tarp platform with ladder Wabco Smart Board with 212,081 km toolbox work lights side underrun protection holder for ladder/broom rear light guards Cgodsx Art Sjpfx Aiaeu raise/lower function ABS/EBS Jost landing gears Leasing or financing available on request!

Condition: used, functionality: fully functional, empty load weight: 7,217 kg, maximum load weight: 31,783 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,620 mm, loading space width: 2,475 mm, loading space height: 2,670 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2022, Equipment: ABS, Object number # 28844 Coil trough 9,000 mm Schmitz axles Disc brake 385/65 R 22.5 tires Body length: 13,620 x 2,475 x 2,670 mm Portal doors double Interior torsion bars Cgjdpfx Aieq T Rgfjasu Sliding curtain Sliding roof Perforated outer frame 5 pairs of lashing eyes 4to. 11 pairs of lashing rings 6to. Schmitz Safety Roof Lifting/lowering ABS/EBS Forklift accessible 5,460 kg Side underride guard Jost saddle supports Load securing cert. EN 12642 XL Load securing cert. Coil transport Beverage certificate Leasing or financing possible on request !!!

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Csdpfx Ajwk Dc Reiaegu Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, first registration: 04/2001, total width: 25,500 mm, tire size: 385/55 R22.5 , 6mm, front tire size: 385/55 R22.5 , 6mm, operation weight: 18,000 kg,

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Codpfxjwz H Nbe Aiaogu All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, RENAULT TRUCKS 460 tractor unit, complete with PIACENZA tipping semi-trailer model S38R2F and MARCHESI crane. Tipper make/model: GMF model RPE. Truck year: 2011. Semi-trailer year: 2006. Mileage: approx. 650,000 km. Semi-trailer payload: 26,580 kg. Truck tires: 315/60R22.5. Semi-trailer tires: 385/65R22.5. Transmission: Manual. EURO 5. Equipped with double bed; equipped with air conditioning. Cgsdjy Ixp Topfx Aiaou

Condition: new, axle configuration: 3 axles, loading space length: 12,500 mm, loading space width: 24,800 mm, total length: 130 mm, total width: 24,800 mm, color: white, Year of construction: 2024, = Additional options and accessories = - Transportation = Remarks = = Additional options and accessories = - Leaf spring suspension = Remarks = The CIMC 3-axle Flatbed Semi-Trailer is a robust and versatile trailer designed to transport large, heavy or irregularly shaped loads. With three axles, this trailer offers excellent stability and carrying capacity, which is essential for transporting construction materials, machinery, containers and other heavy loads. CIMC is known for its innovative designs and reliable products, and the 3-axle Flatbed Semi trailer is no exception. Specifications: - Number of axles: 3 axles for extra stability and higher load capacity. - Load capacity: Up to 60,000kg for various purposes. - Chassis: Made of high-quality steel for maximum strength and durability. - Superstructure: Flat floor without raised edges. - Suspension system: Mechanical or air suspension systems for a stable ride and better load distribution. Features and benefits: High load capacity: - The 3-axle configuration provides excellent weight distribution and increases load capacity. - Ideal for heavy and bulky loads such as construction machinery, containers, and industrial equipment. - Durable construction: The chassis is made of high-grade steel, enabling the trailer to withstand tough conditions of daily use. - Advanced welding technology ensures a sturdy and reliable construction, significantly extending the trailer's service life. Applications: The CIMC 3-axle Flatbed Semi-Trailer is ideal for various applications such as: - Construction sector: Transportation of heavy construction materials, machinery and equipment - Logistics and distribution: Transport of containers, pallets, and irregular loads - Oil and gas industry: Transport of heavy and bulky equipment - Automotive industry: Transportation of vehicles and large machinery Dimensions: L. 12500mm W. 2480mm H. 1200mm Weight 8,400kg+- 5% This CIMC 3-axle Flatbed Semi-trailer offers a robust and flexible solution for companies in need of a versatile and reliable trailer for transporting heavy and irregular loads. Excellent stability, durability and the ability to adapt to specific loads make this trailer a valuable addition to any fleet. Only for export outside the EU. = More information = Tyre size: 315/80 R 22.52 Make of bodywork: CIMC ZJV9403JP General condition: very good Technical condition: very good Visual appearance: very good Codey Rt R Dopfx Aiasgu Damages: none = More information = Year of manufacture: 2024 Empty weight: 8.400 kg Carrying capacity: 60.000 kg GVW: 68.400 kg Selling price: € 24.900, US$ 28.990 Tyre size on axle 1: 315/80 R 22.52 Tyre size on axle 2: 315/80 R 22.52 Tyre size on axle 3: 315/80 R 22.52 Rent kmly price currency: EUR

Condition: used, maximum load weight: 7,500 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2012, next inspection (TÜV): 04/2026, loading space length: 5,035 mm, loading space width: 2,424 mm, loading space height: 400 mm, Equipment: ABS, Leaf suspension, steel rims, air brake, drum brake, metal floor, used vehicle Cgjdjy I H Rlspfx Aiasu Vehicle no. 3296, Münz Otto TDAK 10 three-way tipper with lowering function, ABS, tyres: 235/75 R17.5, leaf suspension, drum brakes, 10 retractable lashing eyes on the loading platform, 2 retractable lashing eyes on the front wall, metal loading floor, front support leg, galvanised, rear body can be lowered for loading construction machinery, continuous loading ramp at the rear, height-adjustable drawbar, platform dimensions LxWxH: 5,035 x 2,424 x 400 mm, loading height approx.: 850 mm, unladen weight: 3,500 kg, maximum weight: 11,000 kg. Subject to errors and prior sale.

Condition: used, empty load weight: 4,140 kg, maximum load weight: 14,860 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 10/2017, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 950 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65R22.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, alloy wheels, 2 axles, SAF axles, tandem, air suspension, 1st axle liftable, raise and lower function, ABS (anti-lock braking system), sliding tarpaulin, underrun protection, front support, storage box, pendulum flaps. Body: 3-way tipper trailer with aluminium sidewalls, sliding tarpaulin & electro-pneumatic left sidewall locking, 2x 9t SAF axles, disc brakes, 1st axle liftable! Loading height approx. 1530mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors! Cgjdpoy Nd Nhjfx Aiaju

Condition: new, functionality: fully functional, machine/vehicle number: 12332580, empty load weight: 680 kg, maximum load weight: 1,920 kg, overall weight: 2,600 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,300 kg, permissible axle load (axle 2): 1,300 kg, loading space length: 3,060 mm, loading space width: 1,800 mm, loading space height: 700 mm, total length: 4,400 mm, total width: 1,920 mm, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Gross vehicle weight: 2600 kg Payload: approx. 1920 kg (Payload may vary depending on optional equipment) Manufacturer: Debon Special features - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery-powered) - Charging contacts in the frame profile (12V / compatible with chargers) - 6 lashing rings in the loading floor - H-frame, galvanized steel (installed / removable) - 350 mm foldable / removable aluminium side panels - 350 mm foldable / removable aluminium side wall extension - Ramp compartment (without ramps; ramps available as optional accessory) - Vehicle documents included Cgsdey I Ufkepfx Aiasu Additional equipment - Floor plate: galvanized steel sheet over phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin connector | Rear fog lamp | Marker lights If you would like to purchase this trailer or have further questions about trailers, please use our internal 3-way tipper trailer "No. 12332580".

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains Codpsy Nu Hkefx Aiaegu * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: used, empty load weight: 6,720 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 03/2027, loading space length: 12,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 425/65 R22,5, wheelbase: 2,000 mm, Equipment: ABS, Colour RAL 6416 turquoise green EBS Disc brakes Cjdoww Ixcspfx Aiasgu Payload 28,280 kg BPW axles 2x 10,000 kg, both forced-steered Lifting and lowering device Rigid underride guard 10 pairs of stanchion pockets Aluminium floor Container locks 2 pairs Subject to errors and prior sale.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total length: 9,560 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,690 mm, color: other, Year of construction: 2004, Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.860 kg Carrying capacity: 34.140 kg GVW: 38.000 kg Identification Registration number: OH-84-RS Cedpfx Aiey Nlf Reasgu

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen Cgjdpfetulh Iox Aiasu We will be glad to answer your questions via Phone and E-mail