Used Pgcnc 2030 Atc for sale (981)

Condition: used, Year of construction: 2005, Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Optical sheet control: Baumer Optronic - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Tsdpjyhdd Uefx Abtob Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device

Condition: new, *IMMEDIATELY AVAILABLE* including side hatch / internal lashing rails / 100 km/h road approval / rear support struts / rear double-wing doors TECHNICAL DATA • Brand: Blyss • Model: F2030HTD • Vehicle type: box trailer • Vehicle condition: new vehicle • First registration: none (unregistered) • TÜV/general inspection: 2 years from first registration • Internal dimensions (LxWxH): 305 x 150 x 180 cm • External dimensions (LxWxH): 452 x 202 x 233 cm • Loading height (floor): 50 cm • Permissible gross weight: 2,000 kg • Unladen weight: 650 kg • Payload: 1,350 kg • Chassis: low loader (wheels positioned beside the body) • Tyres: 185/70R13 • Axle: KNOTT rubber torsion axle Tsdpfx Ajx Ur Trjbtsb • Jockey wheel: yes, automatic • 100 km/h road approval: yes DESCRIPTION • Reinforced, sturdily bolted V-drawbar • Hot-dip galvanized chassis • 15 mm multiplex floor panel • Superstructure made from plywood with plastic-coated walls • Roof made of plywood • Rear double-wing door with lockable rod locks • 2x maneuvering handles at the front • Lockable side hatch on the right • 6 recessed lashing eyes in the floor • Lashing rails mounted at two heights on both sides inside (h= xx cm) • Forced ventilation in side walls: 2x internal fans • Maintenance-free KNOTT rubber torsion axles • Shock absorbers, including 100 km/h certification • 2x rear support struts for safe loading even when trailer is uncoupled • Automatic reverse device • KNOTT overrun coupling and handbrake • Steel mudguards • 13-pin plug • Reversing lights • Large-format safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Optional accessories (on request): • Motorcycle wheel chocks • Motorcycle tie-down straps • Lashing straps • Additional lashing points • Lashing rails on walls and floor for tension belts & load bars • Load bars • Interior lighting • Reversing lights • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration papers can be shipped in advance, or transfer license plates (within Germany) can be provided - Export license plates including customs clearance available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, omissions and prior sale -

Condition: used, Zählgerät mit Kicker zum Versetzen Counter with kicker for moving Tedpfx Abjxrkdnotob Zähler mit Kicker / Batch Counter Stahl PCS 100 SN. 9407008 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Batch dryer dryer Aeromatic Strea 30 fluidized bed dryer batch dryer Stainless steel version Complete with control cabinet and accessories (operation unknown) Total height +/- 3 meter Equipped with nozzle device Suitable for drying and coating Fan power 5,5kW 62000 kcal/h Todpjwyf H Nofx Abteb See our other advertisement VMA Wekerom

Year of construction: 2004, operating hours: 30 h, condition: ready for operation (used), travel distance X-axis: 2,020 mm, travel distance Z-axis: 50 mm, overall weight: 450 kg, spindle speed (max.): 28,300 rpm, number of axes: 3, This 3-axis VHF CAM 2030 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 2030 Bed Type Milling Machine. Contact us for more information. • Working Area: 3000 x 2000 mm • Control Unit: Included • Computer: Included • Software: Included • Connection Cables: Included • High-Frequency Milling Spindle: Replaced • Operating Hours of New Spindle: Approximately 30 hours • Total Machine Operating Hours: Approximately 200 hours • Vacuum Suction System: Included • Tool Changer: Not Included • Tool Changer Retrofit Capability: Possible • Spindle Manufacturer: Perske • Spindle Type: VS 31.09-24 • Spindle Protection Class: IP54 Todpeyf Nlfjfx Abteb • Standard: VDE 0530 • Voltage: 220–220 V • Current: 4.1–3.9 A • Power Factor (cos φ): 0.77–0.88 • Speed Range: 17000–28300 1/min • Frequency Range: 300–500 Hz • Cenon, a control software program from VHF, is installed.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, Todpfjw U Sf Tox Abtob 24 station ATC

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 80,000 m/min, rapid traverse Z-axis: 48,000 m/min, table width: 835 mm, table length: 3,500 mm, table load: 3,500 kg, 1 Axis CNC Swivel head, infinitely variable Axis drive with ball screw drive Roller linear guides in all axes Tsdpfswyv Nzex Abtjb Direct path measuring systems Full work area encosure with roof Chip conveyor Coolant unit X - Travel: 3000mm Y - Travel: 825mm Z - Travel: 1100mm B - Axis: - 3 to + 105° Table Length: 3500mm Table Width: 835mm Table load: 3500 Feed rate X-Axis: 48000mm/min. Feed rate Y-Axis: 80000mm/min. Feed rate Z-Axis: 48000mm/min. Spindle Taper: HSK 100ISO/Bt/Mk Power on spindle: 37kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:25 Number of controlled axis: 4 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3800mm Height: 3800mm

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: black, operation weight: 500 kg, maximum load weight: 800 kg, lifting height: 3,800 mm, axle configuration: 2 axles, Year of construction: 2024, machine/vehicle number: WD1-800, WD1-800 Twin Shaft Mixer with Unloading – Leg Height 3800 mm Remote Control --- Technical Data: Model: WD1-800 Twin Shaft Mixer Batch Volume: 500 L Capacity: 800 L Efficiency: 25 m³/h Aggregate Size: 60–80 mm Paw Rotation Speed: 26 rpm Number of Mixing Paddles: 2 × 7 Mixing Motor Power: 18.5 kW Winch Motor Power: 5.5 kW Water Pump Power: 1.1 kW Basket Lifting Speed: 18 m/min Unloading Height: 3800 mm Dimensions: 4900 × 2900 × 4200 mm --- Equipment: Mixer reducer Mixing motor Winch reducer Winch motor Lubricating system - oil pump Water pump Internal coating Pneumatic discharge Frame Supporting structure - steel legs Unloading basket Platform Tjdsv H D S Ejpfx Abtsb Lifting track Handrail Ladder

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools Todpfx Asw N I A Dobtsb 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: used, Equipment: type plate available, Electrically heated agitator tank with double jacket and insulation Article number: 10707 Volume: 300 L Type: Vertical, standing on 3 legs Leg height: 220 mm Material (product-contact): V2A stainless steel Design: Electrically heated Operating pressure according to nameplate: ATM (atmospheric) Tank dimensions: Internal diameter: 700 mm External diameter: 950 mm Cylindrical height: 730 mm Total height: 2030 mm Total width: 1120 mm Total length: 1340 mm Equipment: Nameplate: Yes Discharge to floor distance: 415 mm Tsdpsw Ic Nijfx Abtsb Outlet valve: Ball valve Outlet diameter: DN40 Opening: 235x750 mm Beam agitator Double jacket: 100 L Insulated Control cabinet Foldable lid 1/2

Condition: new, functionality: fully functional, Charger Condition: New Todpsywpkyefx Abtjb Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Tjdpfx Abjywpl Detob Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors.

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available Todpfxsywzv Is Abtob A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, * Tjdpoy Er Tgjfx Abtob

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Tjdpfx Ajy H U Upebteb Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: good (used), Year of construction: 2019, machine/vehicle number: N500003, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Serial Number: N500003 Stock Number: 3365 Diaphragm: 4 pieces Capacity: up to 100 strokes/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Tsdpsy Ia U Rofx Abteb Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500

Condition: new, Jensen Drain Valve, DN 100 Tedpfx Asy Uigiebteb Jensen Article No. 700280766

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 Tsdpszfx A Ejfx Abteb For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, OKUMA MU-6300V (2023.11) – Technical Specifications Model: MU-6300V Simultaneous 5-axis Vertical Machining Center Water-soluble coolant CNC Control: OSP-P500M Display language: Korean Power supply: 220V / 60Hz Operating voltage: 100V CE + EMC compliant Axis Travels X-axis: 925 mm Y-axis: 1,150 mm Z-axis: 600 mm Tedpfszhgh Iex Abteb A-axis: +90° / −120° C-axis: 360° continuous Simultaneous 5-axis machining Feed Rates Rapid traverse (X/Y/Z): 50 m/min Cutting feed: 50 m/min A-axis rapid speed: 10,800°/min C-axis rapid speed: 32,400°/min Table diameter: Ø630 mm Table configuration: 6 radial T-slots (18H7) Spindle taper: BT40 (MAS BT40) BIG PLUS dual-contact spindle Spindle speed: 50–15,000 rpm Main motor: 22 kW (10 min) / 18.5 kW (continuous) Spindle oil cooling TAS-S spindle thermal compensation TAS-C ambient thermal compensation Tool Magazine 32-tool Automatic Tool Changer (ATC) Air blow for ATC Taper cleaning air blow Standard tool release system JIS pull studs Measuring System Absolute linear scales on X/Y/Z axes Renishaw TS27R automatic tool setter and tool breakage detection Renishaw RMP60 wireless workpiece probing system Calibration reference tool included Manual measurement function 5-Axis Functions Tool Center Point Control II (TCP/RTCP) Hyper-Surface II Slope Machining Function Inverse Time Feed Manual Tool Center Point Transfer Table Coordinate System Transfer DNC-DT Accuracy & Compensation Five Tuning Kit Geometric error measurement Geometric error compensation Straightness compensation Dynamic displacement compensation Coolant System Through-Spindle Coolant (TSC): 1.5 MPa Through-spindle air blow Standard coolant pump: 390 W Wash-down pump: 800 W Through coolant pump: 1.1 kW Cyclone + sintered bag filtration system Chip Handling Floor-type hinge chip conveyor Conveyor height: 750 mm Right-side chip discharge Safety & Protection Full enclosure with roof Y-axis guide cover CE-compliant door interlock CE + EMC export specification 220–480V transformer KCS machine nameplate Operator Interface 21.5-inch adjustable OSP control panel Smart OSP Servo Navigation AI Servo Navigation SF ECO Suite Plus ECO Power Monitor OSP Software Features 4 GB program storage 10 MB operation buffer 999 tool offsets 200 work coordinate systems Tool Life Management Tool Wear Compensation Real 3D Simulation NC Operating Monitor Simple Load Monitor Tool Damage Detection Programmable Messages Programmable Mirror Image Program Stroke Limit Automatic Program Update Automatic Power-Off Function Digital Twin Functions Digital Twin DMC Kit Hyper Simulation Quick Modelling Interactive MAP (I-MAP) OPC UA for Machine Tools Additional Equipment LED work lights Three-color status indicator Mist collector connection (Ø150 mm) Virus protection system

Condition: used, Technical specifications: Number of pistons: 6 Piston diameter: 70 mm Connection to central heating system Integrated heating element Shelf dimensions: 1300x3000 mm Clearance: 410 mm Hydraulic clamping system Tjdjzh U I Nspfx Abteb Safety switch Engine power: 2 + 12 kW Power supply: 400 V Overall dimensions: Length: 3550 mm Width: 1550 mm Height: 2030 mm

Condition: used, mileage: 768 km, power: 184 kW (250.17 HP), first registration: 03/2026, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), New vehicle, 12 tons. MAN TGL 12.250 4x2 truck, new TG3 model with 250 HP, Meiller three-way tipper and crane prep, payload of 6,600 kg, trailer coupling (pintle + ball), gross combination weight 24,000 kg, air conditioning, rear axle differential lock, rear axle air suspension, rear-view camera, extended MAN factory warranty, and much more. Equipment: - Extended warranty: - Truck general vehicle warranty until 19/03/2028 or up to 100,000 km - Truck ATG and ATG+ warranty until 19/03/2030 or up to 240,000 km - Mileage approx. 768 km - Short CC cab with 3 seats and rear wall window - Wheelbase: 3,600 mm - Unladen weight: 5,390 kg - Payload: 6,600 kg - Engine: Euro 6 E, 250 HP and 1,050 Nm torque - Drive: 4x2 - Meiller Trigenius D208, three-way tipper approx. 3.80 m x 2.35 m x 0.50 m high, with crane prep - Bulkhead 0.70 m high - Side and rear walls of tipper body: 1.5 mm, M-JET, HBW 240 steel - Tipper floor: HBW 450 steel, 4 mm - Recessed lashing eyes in floor plate - Pendulum rear wall on tipper body - MAN PowerMatic 08.13 OD automatic transmission - Differential lock on rear axle - Air conditioning - Trailer coupling: Ringfeder RF40/G145A with air connections - Ball head coupling for trailer loads up to 3,500 kg with rear wall protector - Permissible trailer load with continuous brake system 13,000 kg - Technically possible trailer load with continuous brake system: 14,438 kg - Permissible gross combination weight: 24,000 kg - Front axle: leaf-sprung, rear axle: air-suspended - Front axle: 4,800 kg drop-centre, HY rear axle 8,700 kg - Front axle load: 4,700 kg, rear axle load: 8,700 kg - Axle ratio: i=4.11 - Stabilizer for front and rear axle - Shock absorbers on front and rear axles - Full brake assist - EBS with ABS and ASR - ESP - Emergency brake assist (EBA) - Lane departure warning (LDW) - MAN Attention Guard - Alcohol interlock prep - Front detection - Traffic sign recognition - Cruise control - Disc brakes on front and rear axles Tedpfxsyy Hbbo Abtjb - Sun visor - 2 revolving beacons on cab roof - 2 work lights on cab roof - LED daytime running lights - Roof hatch - Multifunction steering wheel - Electrically adjustable and heated external mirrors - Electric windows - Rear-view camera - Professional 12.3-inch instrument cluster - MAN Media System Advanced 7-inch - Driver seat package Plus with air suspension, belt height adjustment, and seat heating - Air-sprung driver comfort seat - MAN sound system New vehicle with day registration in 03/2026 and extended MAN factory warranty. Net price plus 19% VAT. Attractive financing options available upon request. All information given without obligation. Subject to errors and prior sale. Internal vehicle number: 2601

Condition: excellent (used), Year of construction: 2014, Controller WINMAX DSM Table size 1020 × 510 mm Tsdpfx Aoyxb Dhebtjb Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 18000 rpm ATC magazine 40-positions Spindle type HSK63A Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 5000 kgs Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, - Renishaw zero point presetter - Air coolant through the spindle - Chip Conveyor - Portal Handwheel - Machine mounts The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 20 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 740 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 3,800 kg, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, BRAND-NEW HYDRAULIC GUILLOTINE SHEAR 4 × 2500 E21S Controller and Laser Cutting-Line Guide Tedpfsyt E Aijx Abtsb The hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips. It is suitable for steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 4 mm and a working length of 2500 mm, it is an efficient solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, allowing quick and repeatable positioning. An illuminated laser guide clearly indicates the cutting line and helps the operator align the workpiece accurately before each cut. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces during handling. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 4 mm - Maximum cutting length: 2500 mm - Blade rake angle: 1°30′ - Cutting frequency: 20 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 2650 mm - Blade length: 2550 mm - Table height: 740 mm - Motor power: 5.5 kW - Weight: 3800 kg - Dimensions (L × W × H): 3130 × 2030 × 1600 mm - Controller: E21S - Cutting-line guide: Laser STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard - Front safety guard - Foot-control pedal - E21S controller - Illuminated laser cutting-line guide CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear offers a practical combination of cutting capacity, operator-friendly controls, reliable sheet positioning and safety equipment. Its compact design makes it suitable for both general fabrication and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a transport quotation. Please visit our website to view our other available metalworking machines.

Condition: new, Siemens SINUMERIK 6FC5203-0AF04-0AA0 operator panel front 10.4" TFT - Panel Series P10, SN: LBM9637587, unused in opened original packaging, 100% functional, delivery as per photos. Todpfey Nr Eksx Abtob

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Clean water tank: approximately 152–175 l, depending on the version Water recirculation system: approximately 250 l Todoy U Nidopfx Abtsb Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price.