Used Stabau Multi-Pallet Handler 2/1 Profile Type for sale (1,16,690)

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Fgedpjuf Rw Tofx Am Tjd Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: Fgedpfx Aoxrtlujm Tod The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: used, mileage: 2,60,617 km, power: 162 kW (220.26 HP), first registration: 12/2013, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 6,730 mm, loading space width: 2,500 mm, loading space height: 1,970 mm, Year of construction: 2013, Equipment: electric window regulation, tail-lift, Tyre size: 285/70R19,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 8.890 kg Carrying capacity: 7.110 kg GVW: 16.000 kg Fgjdpfxoyx U Ere Am Tod Tail lift: slider lift Make of bodywork: LAMBERET HB-4T11-2C-OT3 = Additional options and accessories = - Spare wheel

Condition: used, Year of construction: 2024, Equipment: compressed air brake, 1M CONTAINER 16M3 STRAIGHT / 1 1 INCL. COC COMPLIANCE UP TO 30 KMH / 1 1 M OVERFLOW RING / 2 1 M MIXING SECTION (K-NOX) 15MM / 2 1 M 6 STANDARD BLADES / 1 1 M SINGLE AXLE Fjdpfsyahfyox Am Tjgd

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Fgsdpfx Amsxtmp Ne Tjd

Condition: new, empty load weight: 303 kg, overall weight: 750 kg, axle configuration: 2 axles, permissible axle load (axle 1): 750 kg, permissible axle load (axle 2): 750 kg, loading space length: 6,060 mm, loading space width: 1,220 mm, loading space height: 400 mm, total length: 7,300 mm, total width: 1,670 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, TEMARED Trailer Type PROFILE 6012 For transporting long pipes and profiles Loading area: 6060 x 1220 mm Legally: 750 kg gross weight, payload up to 447 kg Technically: 1500 kg gross weight, payload up to 1197 kg Brand new trailer 2 years roadworthiness inspection (TÜV) at initial registration, 2-year manufacturer's warranty Features: Hot-dip galvanized welded steel frame Open construction Front and rear drop-down side panels Galvanized V-drawbar Winterhoff coupling Jockey wheel Maintenance-free, rubber-sprung KNOTT axles Tyres: 155/70 R13 on steel rims Plastic mudguards 12V lighting system, 13-pin plug Multi-function taillights Front position lights Side marker lights 2 wheel chocks with brackets Registration documents (vehicle registration certificate, COC) The above-mentioned features are included in the price. Dimensions: Fjdox Uqy Depfx Am Tsgd Loading area: 6060 x 1220 x 400 mm (LxWxH) Bed height: 370 mm Overall length: 7300 mm Overall width: 1670 mm Overall height: 890 mm Gross weight: 750 kg (legally) Gross weight: 1500 kg (technically) Unladen weight: from 303 kg Payload: up to 447 kg (legally, depending on configuration) Axle load: 2x 750 kg Nose load: 75 kg Optional extras at additional cost: Aluminium toolbox + EUR 150.00 Closed floor version + EUR 200.00 Trailer available to order. Delivery available at additional cost! Financing on request. Come visit us or write to us. Offer price includes 19% VAT. Viewings: Mon-Fri 09:00 - 17:00 Saturday 09:00 – 12:00 Offers and further information available on request: Office Tel. +49 (0) 2254/83718-20 Subject to technical modifications, printing errors, mistakes, and prior sale. Images may show optional accessories. *Please note legal requirements regarding weight and speed restrictions.

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek finish Gas chamber furnace Type G.11.01 With loading trolley Maximum temperature 200 ° C BJ. 1991 3 x 380V 54 kW Approximate inside dimensions (B1900mm x T2940mm x H1965mm) Financing through our bank is also possible. komplett-konzept.leasingo.de Fgjdpfsd Spxvsx Am Tsd More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Payload: 0/4 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 250 Kg Mounting: Floor Fodpfxoh Au Ino Am Tjgd

Condition: new, Year of construction: 2020, Empty weight: 293 kg Fsdox I Ev Hopfx Am Tegd Height: 85 cm Attachment suited for: Construction machines

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Fedpfx Asrlk Ikem Tjgd

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Fgedpfx Ameym U Ine Tsd Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components. Fgsdpfx Ajtmrkrsm Tsd

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Fgedpet Hwylefx Am Tsd Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 1995, condition: used, diameter 0 mm workpiece length 1000 mm work piece width 875 mm Fgsdpfot Hwu Njx Am Ted CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell

Condition: new, empty load weight: 6,020 kg, maximum load weight: 28,980 kg, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65R/22,5, Equipment: ABS, | Krone building materials semi-trailer | Toolbox | Pallet box | Spare wheel holder | Krone axles with disc brakes | Unladen weight: 6020 kg | Tires: 385/65 R22.5 | Loading area: L: 14m W: 2.48m Side board height: 0.73m Front wall: 1.6m | Subject to errors, input mistakes and prior sale. Fgsdpfxezinx Ds Am Ted

Condition: new, Schunk SRU+ 40-W / 30052464 Universal swivel unit + 2 x PZN+ 100-1 / 303312 Universal gripper + SGE / 30077266 + 6 x BSWS-B 100 / 303027 quick-change jaw system, unused, 100% functional, scope of delivery as shown in the photos. Fgedpji Ec Nkefx Am Ted

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Fgodpfx Amsi D Iktj Ted

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Fedpsi D Nvcsfx Am Tjgd

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Fjdpfx Amji D Ii Io Tegd

Condition: new, Indramat MAC112B-0-GD-2-C/130-A-1/S005 Permanent Magnet Motor, serial number: MAC112-10094, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fedpoi D Ipuofx Am Tjgd

Condition: ready for operation (used), Indramat MAC115A-0-FS-2-C / 180-B-1 / S001 Permanent Magnet Motor, serial number: MAC115-04930, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgsdei D Irhopfx Am Ted

Condition: new, Lubrix MQL system 0003055 (M12) G 1/2 DN 15, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fodpfji Eby Sjx Am Tegd

Condition: new, Schunk SRH+40-WP /30061820 Pneumatic rotary indexing unit + 2 x part no. 125-1 / 30043071 Universal gripper, unused, 100% functional, scope of delivery as shown in the photos. Fgedpei Ec Ngjfx Am Tod

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005, serial number: 68351, permanent magnet AC servo motor, mounting hole spacing: 152x152 mm, drive shaft diameter: 32 mm, used, shows normal signs of wear, 100% functional. Please request shipping costs separately! Fsdpfei D Ii Dox Am Togd

Condition: ready for operation (used), Indramat MAC093A-1-WS-2-C/130-A-0/S005 Permanent Magnet Motor, Serial No.: MAC093-56032, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Fgjdpfx Amsi D Im Sj Tjd