Used 5700 L for sale (63,686)

Condition: new, Telemecanique TSX L PL7 3 V42 software, unused in original packaging, 100% functional, scope of delivery as per photos Nwsdpfx Amszu Hgwo Usk

Condition: ready for operation (used), Transroll spindle L = 1615 mm, Ø thread: 40 mm, pitch: 12 mm, Ø pin: 30 / 35 mm, length pin: 135 mm, Ø shaft: 35 / 40 mm, length shaft: 120 mm, Ø ball cage: 70 mm, dimensions flange: 85 x 110 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Nodpfxezu Hixj Am Uswk

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Nwodpfx Aozu Hclom Uok

Condition: used, Technical specifications: Tank capacity: 500 L Flow rate: 950 l/min Max. pressure: 10 bar Number of pistons: 2 x 2 Power supply: 400 V Nwedpfxszvmrie Am Ujk Engine speed: 2800 rpm Engine power: 2 x 5.5 kW Overall dimensions: Length: 2100 mm Width: 600 mm Height: 1300 mm

Condition: used, Technical specifications: Tank capacity: 500 l Max. pressure: 10 bar Number of cylinders: 2 x 2 cylinders Power supply: 400 V Engine speed: 1400 rpm Engine power: 2 x 4 kW Overall dimensions: Length: 3100 mm Width: 650 mm Nodpfx Aszvmmgem Uewk Height: 1300 mm

Condition: used, Year of construction: 2007, Saw blade overhang 95 mm Saw carriage feed: forward 1-130 m/min reverse constant 130 m/min Program slider speed: forward 80 m/min reverse 80 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control yes Automatic cutting height control yes Adjustable pressure beam clamping pressure yes Adjustable clamping chuck clamping pressure yes Completely shrouded machine table (saw body) yes Angle guide device min. pressing width 0 mm max. pressing width complete cutting length Main saw motor 18.0 kW Scoring saw motor 2.2 kW Operating voltage 400 V / 50 Hz Electrical connection value for high-power motor: 18.0 kW = 24 kW 21.0 kW = 27 kW Working height 920 mm Paint finish: textured paint gray RDS 240 80 05 Main saw blade 380 x 4.4 x 60 mm Scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air consumption 150 NL/min V at the dust extraction nozzle approx. 26 m/s Vacuum min. 1200 Pa Exhaust air volume 4600 m³/h Dust extraction connection, chip channel 1 piece 200 mm Dust extraction connection, pressure beam 1 piece 150 mm HPP 380/43/43 Cutting length 4300 mm Cutting width (program slider travel) 4250 mm Roller rail (10-track element) 1 piece Roller rail (2-track element) 5 pieces Clamping chucks 7 pieces of which the first 3 pieces are two-finger, all others are single-finger Spacing 75/275/475/1050/1850/2650/3450 mm measured from the angle ruler to the center Clamping chuck 2 additional two-finger clamping chucks possible Pos. 175/375 mm 1 additional single-finger clamping chuck possible Pos. 650 mm 4 manual trimming stops on clamping chucks Pos. 75/475/1050/2650 mm Air cushion table with roller element Nodpfxszuph Do Am Ujwk 2160 x 650 mm 4 pieces Central blower 1 piece Nozzle spacing of the air cushion tables 70 x 70 mm Specifically designed for bending parts. The lifting device shown in the pictures is not included.

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg Nedpfezugqisx Am Uowk The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Njdozvrupepfx Am Uewk Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. Nsdpfxezwdqrs Am Ujwk ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. Nwodpfxey H D Ace Am Uek The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts. Njdpfszwdamsx Am Uowk

Condition: new, functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Nedpfewiwv Ijx Am Uswk Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: used, functionality: fully functional, machine/vehicle number: 33037, mileage: 14,900 km, power: 265 kW (360.30 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 22 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Nwjdszwmn Hjpfx Am Uok Weight variant 26 t, engine OM470, R6, transmission G 211-12/14, regulated water pump, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and load-relieving 7.5 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, tires: front axle 385/55R22.5, rear axles 315/70R22.5, fuel tank 290 l, AdBlue tank 60 l, front underrun protection M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, center seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central door locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-equipment for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor, navigation system lateral impact protection, weight-induced step board locking system, central lubrication system BEKA-MAX, rear end pan 10 mm, 2 LED work lights, bio drain, tool box on the side, camera-monitor system (KMS), Faun Skylift X KEU-KL-FS with work area protection

Condition: used, functionality: fully functional, machine/vehicle number: 33033, mileage: 24,900 km, power: 265 kW (360.30 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, suspension: steel-air, loading space volume: 22 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Weight variant 26 t, engine OM470, R6, transmission G 211-12/14, regulated water pump, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and load-relieving 7.5 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, tires: front axle 385/55R22.5, rear axles 315/70R22.5, fuel tank 290 l, AdBlue tank 60 l, front underrun protection Njdpfxezwmkbj Am Uewk M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort suspension seat, co-driver's functional seat, center seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system with central door locking, multifunction steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, pre-equipment for toll collection, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor, navigation system lateral impact protection, weight-induced step board locking system, central lubrication system BEKA-MAX, rear end pan 10 mm, 2 LED work lights, bio drain, tool box on the side, camera-monitor system (KMS), Faun Skylift X KEU-KL-FS with work area protection

Condition: used, maximum load weight: 27,476 kg, overall weight: 36,000 kg, first registration: 04/2021, next inspection (TÜV): 12/2026, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, Exterior * Air suspension Nodpjzl Iygofx Am Uowk Cargo area * Length: 13,403 mm, Width: 2,460 mm, Height: 2,650 mm * Volume: 87 m³ Other dimensions and weights * Payload: 27,476 kg * Permissible total weight: 36,000 kg Additional features * Formerly a rental vehicle ----Errors and omissions excepted.

Condition: used, mileage: 7,16,302 km, power: 175 kW (237.93 HP), first registration: 12/2018, fuel type: diesel, overall weight: 10,500 kg, axle configuration: 4x2, wheelbase: 4,820 mm, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cable winch, central locking, cruise control, differential lock, parking heater, traction control, trailer coupling, Vehicle location: in transit, BigSpace cab, Mercedes PowerShift 3, long cab, 1 air suspension seat, 2 bunks, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio/CD, cruise control, electric roof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), differential lock, long-range headlights, work lights, winch, leaf/air suspension, trailer hitch with air and light connections, central locking, green environmental badge. Wheelbase: 4820 mm, Body: platform with winch, DISC BRAKES, FRONT AND REAR, STABILIZER, FOR EXTREME HIGH LOADS, REAR AXLE, COMFORT DRIVER'S SUSPENSION SEAT, WIDE ADJUSTABLE COMFORT BUNK ABOVE, COMFORT BUNK BELOW, SEAT UPHOLSTERY VELOUR, DRIVER AND PASSENGER SEAT, HOT AIR AUXILIARY HEATER 2000 W, CONTROL UNIT FOR SLIDING/LIFTING ROOF AND LOWER BUNK, L CAB BIGSPACE 2.30 M TUNNEL, LOCKING SYSTEM WITH CENTRAL LOCKING, TRANSMISSION G 90-6/6,70-0,73, MERCEDES POWERSHIFT 3, PLASTIC TANK 180 L LEFT, SECOND PLASTIC TANKS 2 X 100 L LEFT, LED LIGHT PACKAGE FRONT WITH WHITE INDICATOR LENSES, ENGINE OM936, R6, 7.7 L, 175 KW (238 HP), 1000 NM, ENGINE VERSION EURO VI, WITH OBD-C, HIGH PERFORMANCE ENGINE BRAKE, ACCORDING TO MB 60-2C, MPA DEEP, N-RPM, MEILLER PUMP, 7-PISTON, TYPE 270/45, ESP, LANE KEEPING ASSIST, ACTIVE BRAKE ASSIST, MULTIFUNCTION STEERING WHEEL, STAND-ALONE AIR CONDITIONING SYSTEM. Nodpfx Amezw Ek Ts Uewk Matching trailer available - see -89988-! All information is without guarantee, as the vehicle is currently in transit! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,110 h, load capacity: 1,200 kg, lifting height: 3,300 mm, free lift: 1,230 mm, fuel type: electric, mast type: triplex, construction height: 1,720 mm, fork length: 1,150 mm, empty load weight: 1,000 kg, total length: 760 mm, drive type: Elektro, construction width: 770 mm, High-lift pallet truck Load center: 600 Mast type: Triplex Technical condition: normal Front tire type: Polyurethane Front tire condition: 60 - 80% Rear tire type: Polyurethane Nedpfx Aezt Dzpsm Uewk Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2020 Description: Thorough equipment cleaning, black paint touch-up, hood polishing, new wheels/castors, new inspection, battery regenerated, new acceptance test according to FEM. Impulse control, full free lift, CE certificate.

Condition: used, functionality: fully functional, machine/vehicle number: 34004, mileage: 24,900 km, power: 260 kW (353.50 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, suspension: steel-air, loading space volume: 22 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use. Further comparable vehicles are available upon request. Engine: OM936 R6, automatic transmission 6-3, 49-0.65, Allison 3200 P, steered trailing axle, main tank 200 liters, AdBlue tank 25 liters, front underrun protection (steel), ABS, ASR, parking brake, ESP, lane keeping assist, turning assist, Active Brake Assist 5, cruise control. Folding door on the passenger side, sunroof, driver's comfort suspension seat, 3 static passenger seats, 12.7 cm combination instrument with video function, radio, air conditioning, pre-equipment for toll collection. Nwedpfx Amszwlu Sj Uek Central lubrication system BEKA-MAX, side impact protection, integrated rear monitoring system, bio-drain, 2 LED rotating beacon lights, 2 work lights, step board protection, camera system, camera-monitor system (KMS) for lifters, equipment box made of plastic, Faun Skylift X loading system.

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Nwjdpfx Amozu Av Uj Usk Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Fully functional This saw is ideal for rough cutting. Availability: short notice Location: near Mannheim Nodpjzt Dy Sjfx Am Uowk

Condition: new, STOBER MDS5040A/L frequency converter Nsdpfevanwfex Am Uswk condition: brand new incl. packaging

Condition: used, STOBER MDS5040A/L frequency converter Nsdpey S Dvtefx Am Uswk Condition: used, functional

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Nodpfxoud Iwzs Am Ujwk Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: new, HEIDENHAIN AE LS 487C - glass scale Encapsulated linear encoder Overall length: 920mm Nsdpfx Asylcztom Uewk ID number: 572248-16 SN: 55812708 M incl. quality inspection certificate condition: new

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. Nodezug Dcopfx Am Uswk • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.