Used Actaris Mz 80 Dvgw for sale (18,097)

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), Iodpfxspumdco Aiyebb MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! Isdpfx Aowpknwoiyobb • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: used, functionality: fully functional, machine/vehicle number: H2X396H00103, Year of construction: 2017, operating hours: 3,541 h, load capacity: 8,000 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 2,830 mm, fork length: 2,400 mm, empty load weight: 12,495 kg, drive type: Diesel, Diesel forklift Chassis number: H2X396H00103 Load center: 500 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Ready for use and fully functional Isdpfxezz Txge Aiyjbb Technical condition: very good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 40 - 60% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab.

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Ibodozvniiepfx Aiysb Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? Iedpszvnh Sefx Aiyobb For more information or contact options, please reach us via the contact form.

Condition: new, Year of construction: 2026, pressing force: 80 t, stroke length: 400 mm, clearance between the columns: 1,000 mm, Equipment: documentation/manual, - Capacity: 80 tons - Cylinder stroke: 400 mm - Working width: 1000 mm - Electrically or manually operated - Pressure gauge - Emergency stop Ijdpfx Asz Alrzoiysbb - 400V

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Iodpfx Aioy Iwdpjyebb Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: used, Year of construction: 2004, Milling machines Travel distance X: 880 mm Travel distance Y :630 mm Travel distance Z: 630 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 1250 mm table size Y: 700 mm tool changer: 32 - time Torque: 130 Nm control Heidenhain Universal machining center NC rotary table (C-axis) integrated into rigid table Swivel milling head (B-axis) SK40 tool holder Tool magazine: 32 (2x16 positions) Cooling unit Rotary table: 700 mm Max. table load: approx. 500 kg Ibodpfx Aszwqvnoiysb Speed range - main spindle: 20 - 12,000 rpm Feed rates: 20 - 15,000 mm/min Torque: 130 Nm Machine weight approx.: 9.0 tons Machine dimensions approx.: 4.0 x 3.0 x 2.5 meters

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Iodezyny Nspfx Aiysbb Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Manufacturer: Flowserve / DURCO Ibjdpfx Aioz A Avhsyeb Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,000 h, load capacity: 7,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,850 mm, fork length: 1,400 mm, drive type: Diesel, Side loader Mast type: triplex Condition: Ready for use and fully functional Technical condition: good Ibjdpfsy H Tbbsx Aiysb Fork positioner, heating, road approval (STVZO), full cabin,

Condition: used, Granutech-Saturn Model 80 Grizzly – 300 HP – Tire Shredder/Grinder For sale: Granutech-Saturn Model 80 Grizzly, a heavy-duty industrial shredder/grinder. Basic specifications: Manufacturer: Granutech-Saturn Systems Corporation, USA Model: Model 80 Grizzly Main motor power: 300 HP / approx. 224 kW Main power supply: 416 VAC / 50 Hz / 3-phase Control power: 110 VAC Application: secondary shredding/grinding of pre-shredded tires and rubber Suitable for further size reduction and preparation of material for granulation The machine was previously part of a complete tire recycling line Ijdpfx Aiszyplmeyjbb Location: Poland, near Poznań The machine can be sold separately or together with other equipment from the complete tire recycling line. More photos and technical information are available upon request. Inspection can be arranged.

Condition: excellent (used), Year of construction: 2008, 5-axis machining center, DMG Deckel Maho DMC 80 U Duoblock Ijdpfeyligcjx Aiysbb Control system: Siemens Sinumerik 840 D Year of manufacture: 2008 Internal machine number: 45 Travel ranges: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Tool holder: HSK 100 Tool magazine: 60 positions Gear-driven spindle: 8,000 rpm Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,450 mm Chip conveyor Coolant system with deep-bed filter Coolant supply through the spindle 2-position pallet changer 3D measuring probe (Renishaw) Blum laser Extraction system

Condition: as good as new (ex-display), Gearbox motor, manufacturer Getriebebau Nord Ibedpfxslrt Tue Aiysb Type SK-80 LI4TF i = 21.28 n2 65 min/1 400 Volt 0.75 kW Year of manufacture: 2011 Unused, from warehouse clearance Weight: 19.5 kg Transport dimensions: L. 480 mm W. 160 mm H. 240 mm

Year of construction: 1980, condition: ready for operation (used), The pressure relief valve is defective (pressure gauge). Ibjdpfjz Abxdjx Aiyeb

Condition: used, machine/vehicle number: 208.023, capacity / hour ca.: 8000 Ijdjzz Rmhjpfx Aiyjbb amount of capping heads: 8 working direction: right-left (CCW) Drive: inverter

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, Vacuum filler HANDTMANN VF 80 – manufactured in Germany. The machine can be used for portioning, dosing and twisting. Ibsdpfx Aszumltjiysb Completely factory refurbished and renovated by MM SERVICE 1 year warranty with delivery and installation, included in the price.

Condition: used, machine/vehicle number: 15177, Year of construction: 2018, operating hours: 11,573 h, load capacity: 8,000 kg, lifting height: 3,050 mm, load center: 900 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,400 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, 4949984 Iodow U Hlhspfx Aiysbb Serial Number: 517344J00032

Condition: good (used), Year of construction: 1997, Manufacturer: MABO Model: BABY S.A.S. BABY 80 Machine type: Edge sanding machine Technical Data Distance between rollers: 1,050 mm Max. sanding belt width: 120 mm Number of speed settings: 1 Main motor: 1.1 kW Sanding belt horizontal Sanding belt tiltable Vertical upwards Weight approx.: 95 kg Space requirement length: 2.65 m Space requirement width: 0.55 m Space requirement height: 1.1 m Ibsdpoxgvcxsfx Aiysb Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), mileage: 22,400 km, power: 162 kW (220.26 HP), first registration: 08/2021, fuel type: diesel, wheelbase: 3,350 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - 3rd hydraulic valve - 4th hydraulic valve - Front windscreen - Speed limiter - Cabin - Air suspension - PTO (Power Take-Off) - Sun visor - Toolbox - Towing hitch Ijdpfxjxay Aco Aiyobb = Further Information = General Information Intended use: Construction Technical Information Number of cylinders: 6 Engine displacement: 6,728 cc Unladen weight: 6,220 kg Functional Lifting capacity: 1,760 kg Lifting height: 1,000 cm Number of hydraulic valves: 4 Crane: PALFINGER PK 7.001K SLD3, year of manufacture 2021, mounted behind the cabin Body manufacturer: Meiller Pump: Yes Condition Technical condition: very good Visual condition: very good EURO 6 | PACKAGE | 220 HP DRIVE 4X2 WHEELBASE 335 CM LEAF / AIR SUSPENSION DAY CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION TOOLBOX TIPPER MEILLER METAL FLOOR, THREE-WAY TIPPER LARGE AND SMALL TRAILER COUPLING PALFINGER PK 7.001K SLD 3 TEC7 CRANE CRANE OPERATING HOURS: 1,280 3X HYDRAULIC EXTENSIONS 2X OUTRIGGERS ADDITIONAL CRANE FUNCTIONS 5 AND 6 MAXIMUM WORKING HEIGHT: 10 M MAXIMUM LIFTING CAPACITY AT 3 M: 1,760 KG MAXIMUM LIFTING CAPACITY AT 10 M: 840 KG OIL COOLER FOR CRANE HYDRAULICS

Condition: used, manufacture FESTO type CPX-CEC-C1 We offer: 80 control units Ijdpfezvhnfjx Aiyobb Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block press / Stationary press for multi-layer parquet Ibsdpezzmv Esfx Aiysb Manufacturer: Soest Type: T 80 Hydraulic cold press, previously used for pressing multi-layer parquet (top layer, core layer, and counter layer) Year of manufacture: 2017 (CE marking) Press width: approx. 300 mm Press length: approx. 3000 mm 4 press cylinders, diameter approx. 80 mm Pressing force: 80 t, equivalent to approx. 9.2 kg/m2 Total connected load: approx. 3.5 kW Dimensions: approx. 4200 x 980 x 2150 mm (L x W x H) Weight: approx. 3300 kg

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Ibjdpfxevxh Ius Aiysb Immediately available from stock

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Ijdjzkfd Topfx Aiyebb Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: good (used), Year of construction: 2008, Clamping force: 80 t Screw diameter: 35 mm Distance between tie bars V: 600 mm Distance between tie bars H: 670 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Engel e-victory 310/80 Year of manufacture 2008, 48765 engine hours Iedpfxoyarxde Aiyobb Machine weight 5700Kg Prümer sneku 35mm, standard Minimum mold height 245mm, distance between plates 635mm pri maximum opening Dimensions of clamping plates 670x600mm, diameter of the central ring 125mm Closing force 80 tonnes (800kN) Maximum injection pressure 2000bar, injection speed 222mm/s Maximum stroke volume 160mm (154cm") Number of circuit coolers 12 with float pressure gauge (8x fixed side, 4x movable) 1x control of hydraulic cores Integrated regulator and 24 heating zones.