Used Connection for sale (11,619)

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Fpodpfx Aoq I Nxdoa Njg Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Fodpfxeq N Ud Ie Aa Nopg 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, Year of construction: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Scope of supply: Complete with Tsubakimoto / Mayfran Inc. chip conveyor and full assembly system. High-class CNC horizontal machining center designed for precise milling, drilling, and tapping of metal parts. An excellent choice for series production where performance, accuracy, and reliability are critical. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Working travel (X / Y / Z): 560 × 560 × 625 mm Table: 400 × 400 mm (2-position pallet changer) Max. workpiece diameter: 630 mm Fpedpfx Aexql Daoa Njg Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is intended for the machining of medium and high-precision components in the automotive, mold, tooling, machine-building, and metal industries. Ideally suited for versatile machining – with automatic pallet changing, it enables operator-free production. If you have any further questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Fpedpfx Aoxfiw Tsa Neg Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland Fedpoq Hdwusfx Aa Njpg If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2008, Folding press Bystronic in very good condition. Sold with many tools. Machine tools are connected, can be tested, inspected. Specification: Model: Bystronic PR 400 x 6200 Year: 2008 Bending length: 6200 mm Fpsdpfx Aaeqzxgmo Nog Tonnage: 400 T Tools: available If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Hydraulic Power Unit, Hydropack, Rexroth, Used Machine Fpjdpfx Aaev Dgtms Nog Manufacturer: Rexroth Type: 057-AHAG-G714-0-4-A Dimensions: 870 x 750 x 1570 mm Tank Capacity: 160 liters Pump Type: Rexroth PV7-1A/16, 160 bar Electrical Data: ABB Motor 380-420/220-240 V; 50 Hz; 1.2/2.1 A Number of Valves: 14 pcs Type: REXROTH 4WE 6 D53/OFAG24NK4 Solenoid 4-way DN6 connection 24 V DC

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Fpsdpfoxlp T Ijx Aa Nsg Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Fodpfxjx Hgmwo Aa Nepg Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Fsdpfjx Emfkox Aa Njpg Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fedpfjxukbxex Aa Nopg Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: ready for operation (used), Manufacturer: Testo Model: 480 The Testo 480 features a built-in, high-precision differential pressure sensor, suitable for applications such as Pitot tube measurements, filter checks, and cleanroom monitoring. Its wide range of compatible probes allows measurement of the following parameters: Air velocity and air volume (e.g., for fume hood testing) Temperature Relative humidity Differential and absolute pressure CO₂ concentration Illuminance PMV/PPD (comfort index) Radiant heat Turbulence intensity WBGT index (heat stress) The instrument can be customized with various optional probes and accessories (e.g., a wireless printer for on-site reporting). Technical Specifications Fodow Au Nxepfx Aa Njpg Temperature Measurement Pt100 Sensor Measuring range: –100…+400 °C Resolution: 0.01 °C TC Type K (NiCr-Ni) Sensor Measuring range: –200…+1370 °C Accuracy: ±(0.3 °C + 0.1% of measured value) Resolution: 0.1 °C Relative Humidity (Capacitive Sensor) Measuring range: 0…100 %RH Resolution: 0.1 %RH Air Velocity – Vane Anemometer Ø 16 mm: 0.6…50 m/s | Resolution: 0.1 m/s Ø 100 mm: 0.1…15 m/s | Resolution: 0.01 m/s Air Velocity – Hot-wire Sensor Measuring range: 0…20 m/s Resolution: 0.01 m/s CO₂ Concentration (Ambient Air) Measuring range: 0…10,000 ppm Resolution: 1 ppm Comfort Level Measurement Measuring range: 0…5 m/s Resolution: 0.01 m/s Differential Pressure – Built-in Piezoresistive Sensor Measuring range: –100…+100 hPa Accuracy: 0…25 hPa: ±(0.3 Pa + 1% of measured value) 25.001…100 hPa: ±(0.1 hPa + 1.5% of measured value) Resolution: 0.001 hPa Illuminance Measuring range: 0…100,000 Lux Resolution: 1 Lux Absolute Pressure (Internal or External Probe) Measuring range: 700…1100 hPa Accuracy: ±3 hPa Resolution: 0.1 hPa General Technical Data Weight: 435 g Operating temperature: 0…+40 °C Storage temperature: –20…+60 °C Protection class: IP30 Connectable probes: 2 x TC Type K, 1 x differential pressure (internal), 3 x digital probes Compliance: Directive 2004/108/EC Battery life: approx. 17 hours (at 50% display brightness, without probes) Display: Color graphic display Power supply: Built-in rechargeable battery, mains charger for long-term measurements Data transfer: USB cable or SD card Memory capacity: 60,000,000 measured values

Condition: good (used), Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar Fsdpfx Aashwruco Nepg RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Condition: good (used), Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Fedpfx Aashwrt Ro Njpg Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Condition: good (used), functionality: fully functional, The SIRMAN IS IDRA is a compact, robust hydraulic piston stuffer designed for high-pressure filling of small batches. It is an ideal machine for butcher shops, specialty food producers, or as a reliable backup unit where space is limited and high filling pressure is required. Performance & Specifications High Pressure: Delivers substantial Pressure of 120 bars, making it highly effective for dense, firm, or cold product masses that require a strong pushing force. Compact Capacity: Features a manageable Capacity of 25 Liters, perfect for small-to-medium batch processing and frequent product changes. Durable Construction: Built with Complete stainless steel material, ensuring longevity, hygiene, and resistance to corrosion. Safety Rating: Has an IP 67 waterproof rating, indicating high protection against dust and water, which simplifies the washdown process. Operational Benefits Fpsdpfsxv Svgjx Aa Njg Space-Saving Design: Its compact size and Weight (Net) of 91 kg make it portable (it has casters) and easy to integrate into small production areas. Piston Stroke Control: Features a Piston Stroke of 380 mm, providing efficient filling cycles. Reliable Power: Operates using a standard 220 V electrical connection with a Power of 560 W / 0.75 HP. Excellent Condition: This stuffer is ready for production, offering consistent, high-pressure filling.

Condition: good (used), functionality: fully functional, The SEALPAC MINI is a durable, semi-automatic tray sealing machine, highly valued for its compact footprint, robust build, and ability to produce high-quality seals for small-to-medium batch processing. Specific Technical Highlights Robust Power: Has an electrical connection 3 x 400 V and a Power of 1.5 kW. Durable Build: Despite being a compact model, it has a weight 160 kg, indicating a strong, industrial-quality frame and components. Proven Longevity: Showcasing the lasting quality and reliability of SEALPAC engineering. Operational Benefits (General MINI Class) Compact & Mobile: The machine belongs to the MINI class, meaning it has a small footprint, making it easy to fit into test kitchens, specialty production areas, or smaller facilities. High-Quality Sealing: As a tray sealer, it provides a hermetic, tamper-evident seal, crucial for product safety and minimizing liquid leakage. Semi-Automatic Efficiency: The operator loads the filled trays, and the machine executes the precise cycle of sealing and film cutting, providing a good balance between operator control and production efficiency. Fsdoxyv I Uopfx Aa Nopg Tray size: 289 x 254 mm, deep 23-79 mm, cap 1413-4047 ml Hygienic Construction: SEALPAC machines are built with stainless steel for durability and easy washdown.

Condition: good (used), functionality: fully functional, Model: DS 3000+Vacuum storage tank (cap 200 kg) Productivity 3,000 kg per hour (Max) Caliber/Diameter 15−40 mm Range Suitable for most standard sausages (hot dogs, cocktail, etc.) with cellulose Fpsdpexxl Hwjfx Aa Nsg casings.Peeling MethodSteam and Vacuum SuctionSteam loosens the casing Power 4−5.5 kW Steam Required Connection 1/2" Requires external steam supply (approx. 1.7 bar inlet). Compressed Air Connection 3/8" Required for pneumatic controls (approx. 6.9 bar inlet). Voltage 400V 50Hz 3N or 380 V 50 Hz

Condition: excellent (used), functionality: fully functional, The METTLER TOLEDO ASN9000 Series metal detector is a crucial Quality Assurance (QA) machine designed to ensure product safety by detecting and rejecting ferrous, non-ferrous, and stainless steel contaminants on the production line. Fpsdoxv S D Repfx Aa Njg Detection & Security High Sensitivity: The Detector Head rate is IP66, and it operates with Max. Frequencies Up to 800 kHz, ensuring high detection sensitivity across a wide range of metal contaminants. Automatic Rejection: Features a reliable Pusher (or Reject Arm) Operation Rejection system to automatically remove contaminated products from the line. Line Speed Capability: Capable of operating at a Max. Line Speed Up to 60 m/min, ensuring it keeps pace with high-speed production lines. High QA Rating: The main unit has an IP Rating of IP44, providing protection in a typical food processing environment. Operational Benefits User Interface: Equipped with a 5.7" Color Touchscreen HMI for easy setup, monitoring, and data management. Robust Construction: The detector is built with Stainless Steel (304) - Brushed Finish Construction, offering durability and simplified cleaning in washdown environments. Connectivity: Includes Ethernet TCP/IP, Fieldbus, USB port Connectivity for network integration, data logging, and remote diagnostics. Manageable Load: Designed to handle a Max. Load of 10 kg on the conveyor.

Condition: good (used), functionality: fully functional, The VEMAG Smoke Gen Model: 501/E is a dedicated smoke generation unit manufactured by VEMAG ANLAGENBAU. Fjdpfx Aoxv Srhoa Nopg It is designed for industrial use, providing consistent smoke output for commercial smoking and cooking houses. Performance & Control Manufacturer Quality: Produced by VEMAG ANLAGENBAU, a highly regarded name in food processing equipment. High Generation Rate: Capable of a Generation Rate of Up to 250m3, making it suitable for large-volume smokehouses. Reliable Power: Operates using an industrial Operating volt of 400 V / 50 Hz, ensuring stable power delivery for continuous operation. Controlled Power Consumption: Has a Total power of 26 A and a Fuse of 35 A. Operational Benefits Industrial Connection: Features a Tube Connect of DN125 for robust and secure integration with the smokehouse ductwork. Durable Construction: Built with stainless steel, ensuring longevity, resistance to the smoking process, and simplified cleaning. Excellent Condition: This unit is ready to be connected and put into service, offering reliable smoke generation performance.

Condition: used, Year of construction: 2002, For sale: a professional combined coil metal processing line by Finnish manufacturer Macring / Sintech, manufactured in 2002. This line is designed for uncoiling, leveling, longitudinal slitting, sheet cutting, and recoiling of coiled metal into smaller coils. The equipment is suitable for precision cutting of metal up to 1500 mm in width. The machine is currently dismantled; however, all connection elements are labeled, which makes recommissioning and assembly easier. The line is operated via a hydraulic system. Line configuration: - Uncoiler – 8 T - Metal leveling segment - Longitudinal slitting unit - Spare slitting knives - Sheet cutting guillotine - Braking and separating segment - Turnstile with separator - Recoiler – 8 T - Control panel - Electrical cabinet - Lifting/lowering table Fpjdpfx Ajy N Sqgea Nsg - Safety fences Technical specifications: - Maximum metal width: 1500 mm - Maximum coil weight: 8 T This equipment is suitable for sheet metal processing as well as the production of ventilation, roofing, façade, and other metalworking products. If you have any additional questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Fjdpfx Aasv D A Ime Njpg Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Fsdpfsyg Eu Ssx Aa Nspg Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Fpjdpfx Aajt Hg Aco Njg Specification: Year: 2004.07 Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Fedswmk Ewepfx Aa Nepg Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. Fpedpfx Aaexhgl Tj Nog If you have any further questions, we will be happy to assist you.