Spindle rpm : 14000
F38jvrn8a
Spindle taper: CAT40 (HSK-A63 otp)
Table dimensions: 1300 mm × 510 mm
Max. payload: 800 kg
X axis travel: 1050 mm
Y axis travel: 510 mm
Z axis travel: 460 mm
Fast forward:
X-axes: 48,000 mm/min
Y axes: 36,000 mm/min
Z axes: 36,000 mm/min
Tool capacity: 30 tools
Max. tool weight: 8 kg
General Data
Measurements width 3065 mm
Measurements depth 2565 mm
Measurements height 2625 mm
Machine weight 7500 kg
Control Unit
Brand Fanuc
Model Series FS31i
Main Drive
Spindle speed range 200-20000
Movement
Cismiveaua
X-Axis Movement 900 mm
Y-Axis Movement 500 mm
Z-Axis Movement 450 mm
Workpiece
Workpiece weight 8 kg
Table
Outer length 1000 mm
Outer width 500 mm
Table load 1000 kg
This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped w...
Catalog No. : 5758
Type: MAG1
Producer: MAKINO
Made in: 2015
Characteristic:
Control system: FANUC Series 31i-B
Number of axes: 5 pcs
Number of pallets: 2
Bt0wl2q7
Pallet size: 800x1000 mm
Payload: 1300 kg
Power of the spindle drive: 80-120 kW
Block speed: 500-33000 1/min
Number of tools in the magazine: 120 pcs
X-Axis travels: 1520 mm
Y-Axis travels: 1100 mm
Z-Axis travels: 1350 mm
Taper: M10
Workpiece diameter: 1500 mm
Workpiece height: 1500 mm
Power of the spindle: 120 kW
Equi...
x-travel 450 mm
y-travel 620 mm
z-travel 500 mm
Control FANUC 31Is-B
Size of table plate 340 x 300 mm
table weight 250 Kg
T-slots 12H8 x 4
a-axis 150 ( +30-120) °
c-axis 360 °
Gfmyitajq
rapid travel x/y/z 60.000 mm/min
tool taper HSK-A63
number of spindle speeds 50 - 20.000 U/min/rpm
spindle drive 11/22 kW
Torque 95/28 Nm
tool change unit 60 pos.
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.
The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.
Also some tool pots are damaged.
C08d8nru
Can be repaired or used as spare parts
Control Unit
Brand PROFESSIONAL 5
Model micro computer integrated in Fanuc 16iMB CNC
Main Drive
Spindle speed range 20000
Number of axis 3
Movement
X-Axis Movement 650 mm
Y-Axis Movement 450 mm
Z-Axis Movement 350 mm
Table
Outer length 750 mm
Outer width 450 mm
Height adjustment 500 mm
Tools
Type of tool holder ASK-63
Additional Equipment
Multi-fixation hardened tables M10 / Ø20 H7 – pitch 25 / 100.0 mm
Ravpz
Tool presetting and M&H piece measurement probe
NAKANISHI electrospindle 50,000 rp...
The machine is in good technical condition, by prior arrangement the possibility of test drive. Accessories are 10 HSK-90F holders + 1 clamping tower with vacuum connection. The machine is also equipped with Donaldson aerosol extraction.
I08jhfd2e
x-travel 900 mm
y-travel 500 mm
z-travel 450 mm
table-size 1.000 x 500 mm
U99ded8
Control FANUC PROFESSIONAL 5
spindle taper BT - 40
rapid taverse 20.000 mm
workpiece 1,000 x 500 x 450 mm
table weight 1.000 Kg
workpiece dia. 120 mm
max. tool weight 8 kg
Tools changer RANDOM 30 pos.
Internal cooling system 20 bar
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
x-travel:560 mm
y-travel:560 mm
z-travel:600 mm
control:Fanuc 16 iMA
rapid travel x/y/z:84 / 84 / 94 m/min
feeds x/y/z -stepless:50000 mm/min
spindle drive:22 kW
Cfpmmle0kl
spindle speed::50 - 14000 1/min
max. torque on the spindle:156 Nm
size of pallet:400x400 mm
numbers of pallets:2
table load:500 kg
working diameter:630 mm
workpiece - installed height:1000 mm
change time of pallets:10 sec
distance spindle center to table:80 -640 mm
Distance spindle nose - pallet centre:70-670 mm
tool magaz...
x-travel 550 mm
y-travel 1000 mm
z-travel 500 mm
Control FANUC Professional 5
A-axis 150 °
c-axis 360 °
type of pallet-changer 2-fach
size of pallet 400x400 mm
table load capacity - central/maximum 300 kg
turning speeds 14.000 U/min
tool change unit 80-fach
tool taper HSK A 63
rapid traverse 48 x 50 x 50 m/min
0 25/18,5 kW
total power requirement 81 kVA
weight of the machine ca. 17,5 t
dimensions of the machine ca. 3,3x2,9x3,4 m
only 9,696 spindle hours
2-fold pallet changer
automatic lu...
The machine is in good technical condition, by prior agreement the possibility of testing.generator - MGW-R software version - VMC version W1-002-1, EIS version 4.301, COND version 003 max. stroke X 600 mm Y 400 mm Z 260 mm U and V +/-75 mm
Reo8v
- USED - WIRE EDM MACHINE WITH AWF
X-AXIS TRAVEL: 450 mm
Y-AXIS TRAVEL: 300 mm
Z-AXIS TRAVEL: 320 mm
U/V-AXIS TRAVEL: ± 101 mm
H2omvtt
MAX PIECE WEIGHT: 800 Kg
MAX PIECE SIZE: 730 x 500 x 300 mm
TANK SIZE: 730 x 500 mm
CONTROL UNIT: MAKINO MGW-R
ACCESSORIES: PORTABLE HANDWHEEL
x-travel:560 mm
y-travel:560 mm
z-travel:600 mm
control:Fanuc 16 iMA
rapid travel x/y/z:84 / 84 / 94 m/min
feeds x/y/z -stepless:50000 mm/min
spindle drive:22 kW
spindle speed::50 - 14000 1/min
max. torque on the spindle:156 Nm
size of pallet:400x400 mm
numbers of pallets:2
table load:500 kg
working diameter:630 mm
workpiece - installed height:1000 mm
change time of pallets:10 sec
distance spindle center to table:80 -640 mm
Fcbspy9
Distance spindle nose - pallet centre:70-670 mm
tool magazin:...
General Data
B97zck3iyk
Measurements width 2890 mm
Measurements depth 5680 mm
Measurements height 3300 mm
Machine weight 15000 kg
Main Drive
Number of spindles 1
Spindle speed range 10000
Spindle motor power 30/26 kW
Number of axis 4
Movement
X-Axis Movement 800 mm
Y-Axis Movement 750 mm
Z-Axis Movement 770 mm
Workpiece
Workpiece weight 1200 kg
Table
Outer length 630 mm
Outer width 630 mm
Tools
Slots in storage 40
Media
Chip conveyor Yes
This Makino A77 horizontal machining center was man...
Makino MCD2016 5 Axis Twin Pallet Horizontal Machining Centre with Makino Professional 3 Control, Table X Axis 2000mm, Spindle Y Axis 1600mm, Column Z Axis 1500mm, Pallet Size 1300 x 1300mm, Max Pallet Load 12,000kg, Pallet Weight 1,500kg, 99 Automatic Tool Changer., Spindle BT50 Big Plus, 50kw Motor, Spindle Speed 20 - 15000rpm. S/No. 118 (2004).
“offers considered prior to auction”
Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we re...
Makino SP 43
CNC control MGW-R
Travels
Cicaypgo2n
X: 450 mm
Y: 300 mm
Z: 320 mm
U/V axis: +/- 101 mm
table: 730x580 mm
tub: 890x850 mm
max.workpiece weight: 900 kg
dimensions approx: LxWxH 3000x3000x2300 mm
weight approx: 3400 kg
General Data
Measurements width 3550 mm
Measurements depth 2900 mm
Measurements height 3200 mm
Machine weight 18000 kg
Control Unit
Model Cnc controller Professional 5
Oh78rzr2
Main Drive
Spindle speed range 14000
Number of axis 5
Movement
X-Axis Movement 550 mm
X-Axis Rapid Traverse 48000 mm/min
Y-Axis Movement 1000 mm
Y-Axis Rapid Traverse 50000 mm/min
Z-Axis Movement 500 mm
Z-Axis Rapid Traverse 50000 mm/min
Media
Main electronic connection 400V / 50Hz
This Makino D500 Vertical Machining...
5 Axes - High Speed Precision Machining Centre
MAKINO V22-5XR
Year of manufacture 2006
Traversing range
X: 320 mm Y: 280 mm Z: 300 mm
table: 450 x 350 mm
Spindle speed 40.000 rpm
D8jq029
Spindle taper HSK-E32
rapid traverse 20,000 mm/min
Cutting feed rate 10,000 mm/min
Maximum workpiece 450 x 475 x 200 mm
Maximum payload 100 kg
Tool changer ATC 60x
Chip to chip 8 sec
Maximum tool diameter 32 mm
Maximum tool weight 0,5 kg
Attention: Machine is sold as defective and with spindle damage!!!
Technical Data:
Spindle
Taper BT 50
Speed 20-10.000 rpm
Ufuuznfn
Start up time 1,0 s 0 - 5.000 rpm / 3,7 s 0 - 10.000 rpm
Drive motor ratings AC 26 kW (cont.) / 30 kW (30 min)
Orientation Electrical servo
Tool clamping force 19,6 kN (2 ton)
Tool changer for 130 pcs.
Range of movements
Axis travel X: 800 mm
Y: 750 mm
Z: 770 mm
Spindle center line to pallet top 100 - 850 mm
Spindle end to pallet center 180 - 950 mm
Pallet
Pallet size 600x600 mm
Pallet worksize Ø 910 mm / 1.000 mm H
Allowable ...
There are three Machining Centers Makino A 55-A 206 available, controls: Makino Professional 3,with pallet station, documentation and spare parts, was maintained regularly.
Cf9q7aqqtq
Control Unit
Brand Makino
Model MGH
Media
Main electronic connection 400/50 V
This Makino EDNC 43 Erosion machine was built in the year 2004 in Germany. It is equipped with a Makino MGH control unit. The machine has a lead wire size of 6 mm^2.
Ce0k7wdqwt
Application Types
EDM
Second-hand machine in good and well-maintained condition.
Year of manufacture: 2011
Location: 35708 Haiger
Price: 36.000 € excl. VAT
General information:
Table size. : 910 x 660 mm
Table load (max.) : 1.000 kg
Travel in XYZ : 650 x 400 x 420 mm
Travel in UV : 130mm
SPECIFICATIONS :
X, Y and Z axis travel 650 x 400 x 420 mm 25.6 " x 15.74 " x 16.5"
U and V axis ±101 mm ±3.97"
Maximum taper angle ±15° (±45° with optional "C" guides)
Workpiece size inside work tank 1070 x 855 x 411 (320)...
Makino A55 - Horizontal machining center
Condition:
- One axis module has been removed - not ready for use
- System machine - the machine is integrated in a flexible manufacturing system
(Fastems)
- year of construction: 1999
- 2 machine pallets 400 x 400
Cbmtglrllg
- HSK63 spindle
- Control FANUC Pro 3
Technical Data:
Spindle
Taper BT 50
Speed 20-10.000 rpm
Start up time 1,0 s 0 - 5.000 rpm / 3,7 s 0 - 10.000 rpm
Drive motor ratings AC 26 kW (cont.) / 30 kW (30 min)
Orientation Electrical servo
Tool clamping force 19,6 kN (2 ton)
Tool changer for 130 pcs.
Range of movements
Axis travel X: 800 mm
Y: 750 mm
Z: 770 mm
Spindle center line to pallet top 100 - 850 mm
Spindle end to pallet center 180 - 950 mm
S9g0gh
Pallet
Pallet size 600x600 mm
Pallet worksize Ø 910 mm / 1.000 mm H
Allowable lo...
Media
Main electronic connection 400 V / 50 Hz
This Makino SP64 Wire erosion machine was manufactured in the year 2006 in Germany and has 40570 production hours. It is equipped with a MGW- 95 control unit.
Application Types
EDM
Gjc8jns
CNC FANUC 15 M, with tailstock, Doppelschleifspindel and charger.
Suitable for the forehead, Nutschleifen, sharpening and back loops of milling tools.
maximum tool shank diameter 42 mm
maximum tool length (for R-loops) 150 mm
maximum radius of grinding 60 mm
Max tool diameter 170 mm
Max slope angle (left, right) 65 °
Bcrp0efbbr
X 420 mm
Y-axis 250 mm
Zaxis 280 mm
A-axis 360 °
W-axis - 120 to + 5 °
B-axis +/-90 ° (manual)
C1-axis +/-180 ° (manual)
Spindle stock tilt/spindle stock Cross movement f...
Makino U 86 Wire eroding machine,
Built in 2001,
Control Multipulse,
Travel X/Y/Z 800/600/500 mm,
max table load 3,000 kg,
303xpemx
Bath size X/Y/Z 1220/910/500 mm,
Clamping area Table 1220 x 910mm,
Control Unit
Brand Makino
Model Pro3
Main Drive
Spindle speed range 20 -12000
Tool taper HSK-A100
Number of axis 4
Movement
X-Axis Movement 900 mm
Y-Axis Movement 800 mm
Z-Axis Movement 970 mm
Table
Outer length 630 mm
Outer width 630 mm
Iflk3duuw
Height adjustment 1300 mm
Table load 1200 kg
Tools
Slots in storage 132
Max weight 20 kg
Max tool diameter 300 mm
Max tool length 690 mm
Media
Main electronic connection 400V / 50 Hz
This Makino A88E Horizontal Machining center was manufactured i...
X axis working area: 4000 mm
Y axis working area: 1350 mm
Islcul3hw
Working Table: Pod and Rail
Main Electrospindle power: 15 KW
Number of controlled axes: 5 axes
Maximum edge height: 60 mm
Total number of drilling spindles: 18
Total number of tool changer positions: 12
X / Y / Z 600 / 400 / 600 mm
Clamping table: 750 x 450 mm
Cubtd7nq
Drilling capacity: ST 60 40 mm
Reaming: ST 60 M 24
milling performance: ST 60 350 cm³/min
Max. table capacity: 500 kg
Spindle mount: ISA 40
Speed range (adjustable): 50 - 9000 turns/min
fast forward: x/y/z 40/40/30 m/min
Max. tool weight: 4 kg
Max. tool length: 350 mm
time for tool change: 1,9 s
time between chips: 3,9 s
Drive power: 13 kW
Weight of the machine in controlling cabinet: ca. 3500 kg
L/W/H 3100 x 1730 x 2960 mm
Vertical BAZ Famup MMV 160-65 LD with integrated 4th axis and partition wall
Travelling column milling machine with integrated water-cooled motor spindle
Moving tool magazine and linear motor in X and Y axis
Year of construction: 2011 (IB in 2012)
Control: GE Fanuc Series 18i-MB
Running hours: approx. 9.000h
Technical data:
Speed 12000 rpm
tool holder: SK 40
Magazine places: 30 pieces
Traverse paths:
X=1600mm
Y=650mm
Z=600mm
rapid traverse: X-Y-Z 60/60/30 m/min
table clamping area: 2000...
Sold only as a spare parts carrier. Not ready for operation.
Cl7tgm8
Cover Maho Sauer Ultrasonic US 20 vertical BAZ
year of construction: 2008
Control: Sinumerik 840D
!!!!PLC as backup copy completely available!!!!
Machine is sold incl. automation only as spare parts carrier.
Machine is not executable!!!
Accessories:
- Blum Laser
- suction
- Automation
Morlock Motors official partner of Machineseeker and Truckscout24
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.