Used Forging Hammers for sale (589)

Condition: used, fuel type: diesel, Year of construction: 2019, operating hours: 4,187 h, Make of engine: Hino Track width: 70 cm Production country: JP Please contact Kristoff Van Havere for more information Itjdpfx Adjz Ax D Rslol - Hydraulic quick hitch CW40 - Bucket 1800mm - Auxiliary piping for hammer and sorting grab (high and low flow lines) - Central grease system - Cab overpressure filter unit

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Iodpfx Adjxpiw Usletl Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: excellent (used), power: 43 kW (58.46 HP), chain condition: 60 %, Year of construction: 2011, operating hours: 8,204 h, Equipment: air conditioning, rubber tracks, CATERPILLAR 308D year 2011 operation hours: 8.204 hrs. ROPS Airco Iedpfezrt Amex Adlotl Radio Monoboom Stick: 2,20 meter All hydr. lines (hammer-, gripper-, scissor-) quick coupler OQ45 1x bucket with 750mm width U/C: approx 60% good trackshoes: 450 mm width blade support Misubishi engine with 43 kW CE Operation weight: 8,5 to.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Erdwich HA800 hammer mill Soundproof enclosure Itodpfx Ajztp D Aedlel Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: used, Komac Hammer CW05 = More information = Application suitable for: Construction machinery Reference number: V8 Contact Miguel Cubas for more information. Isdpjxnq Rmsfx Adlstl = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, stroke . mm weight max. 300 kg speed . m/min total power requirement . kW weight of the machine ca. 2,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Itodpjyuzaaefx Adlol More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), power: 159 kW (216.18 HP), overall weight: 30,300 kg, chain condition: 50 %, Year of construction: 2013, operating hours: 13,378 h, Equipment: air conditioning, Komatsu PC290NLC-10 Year: 2013 Operation hours: 13.378 hrs. ROPS Protection Cab Airco Back drive camera Central lubrication Monoboom Stick: 3.25 m. All hydr. lines (hammer-, gripper-, scissor line) OQ70/55 quick coupler 1x bucket – 1.40m width U/C: approx. 50% good trackshoes: 600 millimeter width engine with 159kW CE / EPA Transport: 10 x 3 x 3.5m Operation weight: 30.3 to Iedpfozt Rfbsx Adlotl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s Itsdpfx Aszvnpiodljl - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: used, Fitzpatrick FASO20 Hammermill Itsdpfx Aezzf N Rodlel Stainless, Fitzmill hammer mill, 30Kw motor, hammermill 480mm x 300mm, 48 blade assembly, all on stainless frame 3Ph

Condition: used, Year of construction: 2014, operating hours: 7,080 h, Tel.: call (Contact · Telephone · Mobile · WhatsApp) * Kubota KX 41 - 3 V * Mini excavator * Kubota engine, * Model D902-E3 or D902BH etc. * 3 cylinders * Displacement: 898 cc * Power: 12.7 kW * 17 hp * with quick coupler * 2 digging buckets * 1 ditch cleaning bucket * 1 hydraulic hammer * KM 100 Ijdpfx Adswu Rrtolotl * Adjustable width of rubber tracks * Operating hours: 7080 * Year of manufacture: 2014 * Net price * All information provided without guarantee

Condition: used, Year of construction: 2007, 4-in-1 Combination Hammer C3-31 in good condition Ijdpjzq Ddlefx Adlotl Year of manufacture: 2007 3 kW 3 blades approx. 500 kg

Condition: used, Anvil with round and pointed horn Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Iodpfxjzinw Ho Adlstl Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Isdpjzxdrljfx Adljtl Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37

Condition: used, Year of construction: 2011, operating hours: 5,461 h, CAT 306 TRACKED EXCAVATOR Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? BETRIEBSSTD. 5461 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Ijdpfxexpmfcj Adletl * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Itodpfx Adszaqp Ujlel Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 9,202 h, Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW40 Iodszymv Aspfx Adlstl - Bucket 1800mm - Auxiliary piping for hammer and sorting grab - Perfect condition

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Itodpfsyai Eujx Adlsl The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Iodpfxsy Hi D So Adletl Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Itedpolnlmvofx Adljl

Condition: used, Komac Hydraulic Hammer CW05 = More information = Suitable for: Construction machinery Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Itsdpsxnq Nvefx Adljl

Condition: used, Year of construction: 2013, operating hours: 8,577 h, JCB 8061 TRACKED EXCAVATOR Itedpfx Asw I I Nhodlel Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2013 ? BETRIEBSSTD. 8577 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: excellent (used), Year of construction: 2018, For sale is a used Hammer planer machine A3-31 with a planing and thicknessing width of 310 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (fully functional) Iodpozlthvjfx Adljtl Technical data: - Planing and thicknessing width 310 mm - 3 cutterblocks (reversible cutter system) - Planing fence swiveling 90-45° - Planing table, dual folding - Thicknessing height 4-225 mm - 4 HP (3kW) motor, 400 volts The planer machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer machine, thicknesser, thickness, Felder Reference: R-A33HG

Condition: used, fuel type: diesel, Year of construction: 2010, operating hours: 7,796 h, Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW10 - 2 buckets - Auxiliary piping for hammer and sorting grab Itsdpjztuutjfx Adlel

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2013 (bulk buying discounts available) Condition: Used Itodow Nanrspfx Adljl Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.

Condition: used, Year of construction: 2016, operating hours: 8,121 h, YANMAR VIO80 - 1A TRACKED EXCAVATOR Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? BETRIEBSSTD. 8121 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Itsdpjw I I Nbefx Adljl RADEK - ?????