Used Fumator Welding Fume Extraction for sale (9,177)

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h Hjdpfx Anoxxalnsvenn - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: new, Year of construction: 2024, new dust extractor Hjdpfx Anoyq T Hkevjnn Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Location: Flörsheim

Condition: used, Used machine Features and technical data: Mobile extraction unit With filter bag on top Hnjdjxnfflepfx Anvsn Extraction nozzle: 140 mm Motor: 1.1 kW, 400 V Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W 2-year warranty. Warranty and post-warranty service included. Stock of spare parts and consumables maintained. From order to commissioning in as little as 5 working days. The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding, designed for both thin and thick materials. Compared to conventional methods, laser welding delivers up to 4x faster cycle times, significantly reduced heat distortion, and welds that require no additional post-processing. Welding thin aluminium and stainless steel is straightforward and repeatable — unlike TIG, which demands a highly experienced operator. The machine supports single or dual wire feeding, enabling larger gap bridging and a wider weld bead when needed. Technical parameters (1500W / 2000W / 3000W): - Laser wavelength: 1070 nm +/-10 nm - Maximum power consumption: 8 kW / 10 kW / 13 kW - Cooling system: water-based - Operating voltage: 400V 16A / 400V 32A / 400V 63A - Penetration depth: 0.2-2 mm / 0.2-3 mm / 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80 kg / 90 kg / 100 kg The price includes: - Integrated water cooling system - Raycus laser source - Touch screen with Polish-language menu - Ergonomic plastic welding head - Single / dual wire feeder (optional) - Instruction manual in Polish\English Hnodpfx Anst Al Txovjn - CE Declaration of Conformity Weld samples can be produced on request for the customer's specific workpiece material. Machines are available in various configurations, working ranges and laser power outputs. The listed price applies to the CX-CS1500-H (1.5 kW) model with single wire feeder. Actual appearance of individual components may differ from images shown.

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 Hodpfsuc Unqex Anvenn FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: used, Used machine Hnsdpfx Anjzbv Hujvsn Equipment and technical data: operational Engine 1.8 kW Dust extraction port 160 mm Availability: short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2008, Inverter welding machine, power source, digital control inverter Hnsdpfxjzck Rdj Anven -Manufacturer, Type: OTC DAIHEN, DP-500 -Welding current range: 500A 60%, 350A 100% -Mains connection: 400 V -Software version: P10499 Ver003. 200,000 Accessories: as shown in the pictures -Dimensions: 700/300/H600 mm -Weight: 57 kg

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder RL-140 automatic clean air extraction unit with a maximum air flow rate of 2500 m³/h. The extraction unit has been inspected and refurbished by our service team and is in very good condition. Technical data: - Max. air flow rate 2500 m³/h - H3 dust-tested - Automatic filter cleaning - 10 m³ filter area - Extraction port diameter 140 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Hnedpfsza Dz Rjx Anven Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-T03VW

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding turntable KT 300 Horizontal load 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 450mm Height 500mm Infinitely variable tilt range via crank gear motor 0 - 90° Hnodpfxjc Ug Tls Anvsn Speed 0.3 to 2.5 rpm Incl. foot remote control Surcharge: Quick-release jaw chuck Diameter 300mm, 450.-€

Condition: used, Jaw chuck different versions Hnodpfx Anob I Sdxoven from 300mm to 500mm

Year of construction: 2022, condition: as good as new (ex-display), Welding rotary table Protec KT 1200 Kg Motor infinitely variable swivel and speed adjustable Motor 0,75 KW with remote control Foot switch Table diameter 1200mm height 1000mm length 1400mm width 1500mm Speed from 0,05 to 0,5 rpm Hnedpocrmyfsfx Anven

Condition: excellent (used), Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 1x package available -Weight complete: 15.6 kg Hnsdpfxscbkkas Anvsn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Sale from warehouse location Hnodpfx Aoy Uvrlsnvon Albert-Proeller-Straße 9a, 86675 Buchdorf MIG/MAG pulse welding machine, decompact, modular Wire feeder, EZA, Drive 4X Steel puls S Rotating console (360°) for wire feeders, Cooling module for modular welding machines, Transport trolley (4 wheels) for transporting a power source, a cooling module or a toolbox, and a gas cylinder, assembled Intermediate hose package, water-cooled, 7-pole, 1 m Power plug, assembled

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools Hedpfxji Huvho Anvenn -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: like new (used), Year of construction: 2024, load capacity: 6,000 kg, workpiece weight (max.): 6,000 kg, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable Hsdpsgqgb Ujfx Anvenn The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V Hnjdpfx Anszbvn Esvsn current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Hnsdpfx Aszbvnxenvjn Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2023, condition: used, control Siemens voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: - MIG welding of individual components onto cooling plates using a robot Hnedpfx Anezbvnfjvsn - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, total height: 2,650 mm, total length: 7,200 mm, total width: 2,000 mm, Colour: Grey Empty weight: 1.200 kg - Details: - └ Description: Without control cabinet and fan Hnsdpfxezcnqne Anvjn - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 75 - Filter length [mm]: 2200 - Filter diameter [mm]: 200 - Filter surface area [m²]: 108 - Connection diameter [mm]: 450 - Disassembled: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 6 - Transport dimensions: 7200mm x 2000mm x 2650mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 952 kg Description: - high-quality steel S355J2 N plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ã? 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface Hnjdpfx Anjzb Rdujvjn - Construction reinforced by ribs - Grid lines enable precise superstructures - Special equipment = height-adjustable feet

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 12/06, We are offering this used METAL WORKING CZ, s.r.o. SPS2000 CNC hot plate welding machine, manufactured in 2006. Hsdozdfc Dspfx Anvonn If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), Mobile Extractor Manufactured by Höcker Polytechnik Extractor Standard III A Intake diameter 160 mm Motor 2.2 kW 380 volts Air flow 2460 m3/h Year of manufacture 1992 Hsdewl U U Hepfx Anvonn Transport dimensions: Height with filter 2450 mm without filter 1460 mm Length 1170 mm Width 570 mm Weight 80 kg

Condition: excellent (used), Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit. PRODUCT TYPE: S10 TYPE CODE: S10.1-1HH 1000kg / 2000 Kg Hnjdpfxjzbl Sgj Anvon LIFTING CAPACITY (KG): 1000 / 2000 Kg STROKE (MM): 1000 ARM LENGTH (MM): 1500 / 2000 BENDING MOMENT CLAMPING PLATE (NM): 1400 BENDING MOMENT ARM (NM): 3000 FREQUENCY CONVERTER: yes LIFTING DRIVE: hydraulic SELF-WEIGHT (KG): 1700

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Hnedpewih Dcjfx Anvon Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: new, Year of construction: 2026, load capacity: 1,000 kg, Column Lift Rotating Device, 1 Tonne Load Capacity Protec Turning Device / Positioner Syncrolift Double column, remote control – wireless and manual Adjustable columns, mobile Load capacity: 1000 kg Minimum working height: 600 mm Hsdpfx Aeyk Tb Ienvsnn Maximum working height: 1500 mm Rotation speed: 1 rpm Clamping plate diameter: 500 mm Rotation drive: 0.37 kW Versions with load capacities from 2 to 10 tonnes available upon request