Used Ger Ger Cp-3000 Cnc for sale (19,897)

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction Gedpfez En Iuox Ag Ssuh - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: excellent (used), SCHIESS HoriTurn 4080 MY CNC Turning Center Gujdpfxsz Ha Nyj Ag Soh - Max. turning diameter: 400 mm - Max. distance between centers: 800 mm - Max. load between centers: 800 kg - Max. workpiece weight without support: 200 kg - Axis X / Y / Z travel: 305 / 100 / 900 mm - Rapid traverse X / Y / Z: 20 / 10 / 25 m/min - Axis X / Y / Z acceleration: 5 / 2 / 5 m/s² - Max. spindle speed: 4000 rpm - Torque: 403 Nm - Rated spindle motor power: 13 kW - Swing over bed: 780 mm - Swing over chuck: 410 mm - Tool interface: BMT-65 - Number of tools: 12 - Number of driven tools: 12

Year of construction: 1991, condition: used, Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible. Gsdpfxsz R A Ize Ag Ssuh

Year of construction: 2007, condition: used, X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible. Godpfx Agez Sr Nwj Ssuh

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Gujdpfx Aoz Srv Deg Sjh +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center Guedpfjz St Tqox Ag Soh 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (year 2021) CNC lathe – FANUC 0i-TF, 4,393 hours, like new! Includes a parts collection device for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of manufacture: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual control wheel • Operating hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine type: Single-spindle lathe with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Condition: like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Further pictures and videos of the running machine will be sent upon request. _____ Item description For sale is a high-precision CNC turning center, EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393 and in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including handwheel. • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel distances: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travel (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Main spindle drive power: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Gjdpfozkhuhjx Ag Sjuh Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positioning accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior arrangement. Subject to prior sale and errors.

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Gujdpfoz Iyvpox Ag Soh

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Gjdpfx Agoxy Tmne Souh

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Godsvvi Spepfx Ag Sjuh Storage location: Nattheim

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Gjdpfow Dcccex Ag Sjuh

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Godpfx Agsvvi Nze Ssuh

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Guodpfxjvvkblj Ag Ssh

Condition: new, Year of construction: 2023, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 RPM Gusdpslamr Nsfx Ag Soh Rotary table diameter 1400 mm Tilt angle from 0 to 120° Height in horizontal position 1450 mm, tilted to the center 1250 mm Length 2.0 m x Width 1.6 m with remote control

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,7 rpm diameter rotary table 1400mm Godpfol Dq Svsx Ag Sjuh inclination up to 120 height horizontal 1300mm, tilted to center 1050mm length 2,0 m x width 1,4 m hand remote control with digital display and foot remote control

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. 4 axis not come with machine. Gujdegw Shrspfx Ag Sjh

Condition: ready for operation (used), Adda Antriebstechnik TF-CP225M-4 three-phase motor, serial number: 198, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Guodpsi D Eyyefx Ag Soh

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. Gujdpfx Asi D U Treg Ssh ATTENTION: Please request the costs for packaging and shipping separately!

Condition: used, Year of construction: 2013, Technical details: turning diameter: 38 mm Guodpfx Agotv Sdfj Sjh Article: CNC Long-turn automatic lathe Manufacturer: Hanwha Type: STL38H Year of construction: 2013 Control: Siemens 840SL for 8 axes Main spindle: max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48 Counter spindle: max. pick-up diameter: 38mm, n max. 6,500 rpm Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42 Tool turret: n max. 6,000 rpm Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder FMB Turbo 5-55 High-pressure station SFB-301 eco 150bar Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2003, Heavy-duty trailer, load capacity 3000 kg. Manufacturer: Kampa, year of manufacture 2003. A5 L 5000 mm W 2000 mm H 500 mm, load capacity 3000 kg, year 2003, towing eye 35 mm, good floor made of anti-slip plywood, manufacturer KAMPA. Guodpfx Astymnaeg Soh

Condition: excellent (used), Year of construction: 2019, Sub-spindle, C-axis SIEMENS 840DSL Turning diameter max 16 mm Turning length 145mm Spindle speeds main & sub-spindle 15'000 rpm Tool holder group 1+2: 6 driven positions C-Axis 0.001° Misc. accessories Guodpfxjud Nhhe Ag Seh MARCELS MASCHINEN CH

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Godpofv Huuefx Ag Ssuh Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Gjdpjfxpggsfx Ag Ssuh Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, Guedpfx Aefxphljg Sjh very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Gusdofky Iqjpfx Ag Sjh Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW