Used Hydraulic Presses Hydrap Hpsb 63 1986 for sale (28,798)

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge Hnjdszcxn Djpfx Anvon The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Hnodpfozcwrnjx Anvsn Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Stroke: 300 mm Table dimensions: 800 x 600 mm

Condition: new, Year of construction: 2024, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, EXNER hydraulic single-column press NEW Series EEX SL 40 - Pressing force: 400 kN mech. depth stop Control: Siemens S7 - 1500 Installation height: 400 mm Stroke: 250 mm Tables: 700 x 450 mm Hnsdpfx Aot D Ah Asnvjn

Condition: used, Year of construction: 1994, pressure:100 t throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm Hnsdet Hmk Hjpfx Anvon voltage:380 V weight of the machine ca.:4 t

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t Hsdecxxmkepfx Anvonn

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm Hnjdpfecxxrrox Anvon space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Hnodpfox Nhaksx Anvsn Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm Hodpoy Tptaofx Anvsnn - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm Hjdpfxstqqq Re Anvenn ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t Hnjdpfxstqqwue Anvjn

Condition: used, pressure:120 t stroke:400 mm table surface area:1750 x 500 mm press capacity:120 t working width:1740 mm total power requirement:3,0 kW weight of the machine ca.:2 t dimensions of the machine ca.:2 x 1,0 x 1,5 m Hedpst Hmldofx Anvjnn

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm Hedpfx Ansu D Tz Uevjnn - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear Hjdpfsltrmusx Anvonn - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Hsdpodzp Trsfx Anvonn Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally Hnsdpjyupulefx Anvsn - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control Hodpfx Anewva I Hovonn - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press. Hnjdpfx Aevq Rtkenvon

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top Hnjdpfjrzfh Hex Anvsn - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz Hododzp Tcjpfx Anvonn - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: new, pressure 180 t stroke 400 mm column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Domestic equipments: Hsdpfx Aneyv I S Hjvenn - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Hnodpfxeudph Ie Anvsn

Condition: excellent (used), I sell a Lukas baler in very good condition. Hnjdpfx Asum Htzsnvsn

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Hodpszbb R Eefx Anvjnn

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Hedpfx Anszb Il Nevjnn Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: good (used), Year of construction: 1974, functionality: fully functional, pressing force: 10 t, Straightening press EITEL RP-10 Year of manufacture: 1974 Pressing force: Hsdpfozbhg Hsx Anvenn Stroke: Measuring device for straightening shafts. Includes dial indicators. Machine is powered and fully operational.