Used Jasa Z-Elevating Belt for sale (29,806)

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. Dedpfx Aexqggcsa Njut • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Dsdpfx Asudxchea Nout Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. Djdpfx Aaetwzyfj Neut - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” Dsdpfoitvkuox Aa Neut 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Dodpohtuvrjfx Aa Nsut Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Dusdpjv D H Sisfx Aa Not Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Belt sander Duodpfx Aajuxnyuo Net LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Dodpoy Nl Skjfx Aa Njut Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: used, Używany disolwer produkcji Drais (Niemcy) model RN 3-45 AS VAC. Części kontaktowe wykonane ze stali nierdzewnej magnetycznej (stal ferrytyczna). Maszyna jest przeznaczona do pracy pod próżnią. Mieszalnik posiada pojedynczy wał o roboczej długości 105 cm, wyposażony w dysk zębaty o średnicy 690 mm. Wał jest napędzany silnikiem elektrycznym o mocy 45 kW, 1460 obr/min, 400/690 V, 50 Hz. Robocze obroty wału do około 600 obr/min. Mieszalnik posiada obcierak ścian bocznych kadzi, napędzany przez przekładnię silnikiem elektrycznym o mocy 1.5 kW, 1410 obr/min, 440 V, 50 Hz. Robocze obroty obcieraka do 26 obr/min. Maszyna jest wyposażona w górną pokrywę i kadź o całkowitej pojemności 2000 l. Wymiary wewnętrzne kadzi: średnica 1465 mm x długość prostej linii ściany 1160 mm. Kadź posiada dwa dolne otwory spustowe, każdy przy ścianie bocznej, wyposażone w zawory i jest posadowiona na dwóch dolnych prowadnicach do pracy z wózkiem widłowym. Disolwer jest unoszony/opuszczany hydraulicznie. Unoszenie ok 145 cm. Napęd hydrauliki silnikiem elektrycznym o mocy 1.5 kW, 1420 obr/min, 230/400 V, 50 Hz. W wyposażeniu jest pompa próżniowa produkcji Tepro (Polska) i panel sterowania. Maszyna ostatnio pracowała w przemyśle chemicznym. Dujdpfx Aeykn U Nea Njt

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 0760-00039, functionality: fully functional, The machine can be seen in our plant in Bulgaria. Duedpstqfc Tjfx Aa Net

Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2018, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Dodoy N Rwropfx Aa Neut

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Battery-powered. Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Made in Denmark. Dedpfsy E Ewljx Aa Njut Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 867721275, The HOBART PREMAX FTPi 2-S-AN-R-DS6 (Premium specification) is a high-performance industrial flight-type dishwasher designed for maximum capacity and efficiency in large-scale catering operations (e.g., commercial kitchens, canteens, catering services). Hobart dishwashers make use of various energy-efficient technologies, primarily employing heat pump technology (HP) for drying and energy savings. Heat Pump for Drying: Certain Hobart models feature heat pump technology that heats the drying zone and enhances energy efficiency. Waste Water Heat Recovery: Waste water heat recovery utilizes the energy from hot wastewater (60 °C) to preheat the incoming freshwater to up to 40 °C before it enters the boiler. Drying & Energy: By using heat pumps (HP), energy from the surrounding environment is used to heat the drying air, which significantly reduces energy consumption. Advantages: These technologies result in lower operating costs and improved energy efficiency. Thanks to its extensive equipment, this machine has a power rating of just 27.8 kW—a remarkable figure for a unit of this class. This guarantees continuous, long-term savings in operating costs. The unit was dismantled by Hobart factory service. The system comes from a renowned industrial operation in the elevator construction sector, and became available due to the reconstruction of the entire industrial complex. Projected availability: kW 23 Commissioning will also be carried out by factory service (subject to cost participation), which ensures warranty coverage. You will receive a fully refurbished, fully functional flight-type dishwasher, with commissioning and introduction service provided directly by Hobart factory service. Highlights of the PREMAX FTPi Series SENSOTRONIC Wash Intelligence: The machine automatically adjusts consumption (water, chemicals, energy) based on soil level and dishware volume. LOW-CHEM Detergent Saving System: Lowers detergent consumption by up to 80% by using a dedicated pre-wash zone and water regeneration. CLIMATE-PLUS Energy Saving System: The integrated heat recovery system lowers energy costs. Automated Processes: Includes a tray and cutlery lifting magnet for efficient washing. Model Designation Breakdown: FTPi: PREMAX flight-type dishwasher (Intelligent) 2: Number of wash zones (two) S: SENSOTRONIC (wash intelligence) A: Automatic Operation N: Standard entry zone R: Work direction right-to-left DS6: Below are the key technical specifications and features of this particular model, based on manufacturer information: Technical data: • Capacity: Designed for high plate throughput (over 5,000 plates/h in S configuration) • Water consumption: Approx. 130 – 160 l/h (depending on setting/load) • Orientation: R (right-to-left operation: entry right, exit left) • Machine type: Flight-type dishwasher • Model: Premax FTPi 2-S-AN-R-DS6, FHP • Heating: Electric Dodpsy N N Icofx Aa Nsut • Voltage: 400 V • Mains: 3-PE • Protection: 3 x 50 A • Power: 27.8 kW • Serial No.: 867721275 • Year of manufacture: 2019 • Wash zones: S Prewash/Wash/Rinse/S Drying • Overall length: 685 cm • Discharge: 100 cm • Conveyor width: 44 cm • Conveyor height: 61.2 cm • Height: 190 cm • Height with door open: 215 cm • Width: 68 cm • Exhaust: Climate TE-PRO Subject to changes and errors.

Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,460 mm, loading space width: 2,480 mm, loading space height: 3,080 mm, loading space volume: 56 m³, suspension: air, tire size: 235/75R17,5 143/141L, color: other, gearing type: other, front tire size: 235/75R17,5 143/141L, rear tire size: 235/75R17,5 143/141L, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Duedpoy Nixnjfx Aa Net

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Dusdpfophupmex Aa Not -Conveyor belt rollers: transport rollers diameter 56 mm -Transport width: 335 mm -Shaft: recording M8 -Quantity: 17x transport rollers available -Price per piece -Total dimensions: Ø 56 x 345 mm -Weight: 2.6kg/piece

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Dusdjw Uf Hwopfx Aa Not Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing Djdpfxspid Dks Aa Neut -V-belt pulley: 4-groove pulley SPA 180-4 -V-belt width: 13 mm -Receiver: Taper bushing 2517-55 (Ø 55 can be changed) Quantity: 1 piece available -Dimensions: Ø 185 x 65 mm -Weight: 7.6 kg

Year of construction: 1994, condition: used, machine/vehicle number: 41094/30, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW Djdjya H Hispfx Aa Neut - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm Duedpoya H H Aofx Aa Nst - Total width 1.470 mm - Length: 2000 mm - Used - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Technical data: - GBT-2000 - Working width 1.300 mm - Total width 1.470 mm - Length: 2000 mm - Used Duedpjya H H Nsfx Aa Net - Feed speed adjustable via frequency converter - Frequency converter not included - Motor power 0.37 kW - Max. load 50 kg/m - Color: RAL 7035 light gray - Voltage fluctuations +/-5% - Location: in stock

Condition: used, Year of construction: 1994, Max. pass-through height: 160 mm Abrasive belt length 1st unit: 1900 mm Max. working width: 1350 mm Number of belts: 2 1st unit: - Calibration roller, steel design - Steel, grooved Abrasive belt width 1st unit: 1350 mm Dujdpoy Naq Ujfx Aa Not 2nd unit: Combined sanding unit Design of 2nd unit: Roller/shoe Control: Manual control panel Elec./pneu. belt oscillation: pneumatic Infeed height: fixed (upper part moves) Table lift: electro-motorized Table display: mechanical numeric display Working or infeed table height: 900 mm Location: Nattheim

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. Dedpoirmgfofx Aa Njut DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: xxxxx11, Electric telescopic conveyor for 2 persons for loading and unloading trucks and containers. Manufacturer: MAXX REACHER Type: MR3170 Year of manufacture: 2021 Extendable up to 17 meters + 8 meters own length = 25 meter conveyor belt. Conveyor belt width 1000 mm / height adjustable to reach "under the roof" inside containers. Dujdpfx Ajx Ed I Hea Not

Condition: used, mileage: 3,04,000 km, power: 309 kW (420.12 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2018, Equipment: ABS, air conditioning, crane, MERCEDES ACTROS 2542 HOOKSYSTEM + CRANE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2018 ? MILAGE: 304 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 520/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: AIR CRANE: LOGLIFT 150 Z Dusdpfx Aajyg Ulgo Njt TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 5945

Condition: ready for operation (used), Year of construction: 2024, The item for auction is a conveyor belt with a length of 3m and a belt width of 0.5m. The height of the conveyor is hydraulically adjustable. Possibility of transport. Djdpov T H N Hofx Aa Njut