Used Urban Aks 3900 for sale (1,113)

Condition: used, mileage: 2,28,265 km, power: 170 kW (231.14 HP), first registration: 03/2004, fuel type: diesel, empty load weight: 10,680 kg, maximum load weight: 7,320 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,340 mm, loading space height: 600 mm, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, additional headlights, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, steel superstructure, Kz. House, 2x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, radio, cruise control, switch 12, ABS (anti-lock braking system), traction control (ASR), constant throttle, exhaust raised, differential lock, fog lights, driving lights, storage box, leaf spring suspension, air+light trailer hitch, low-noise G1, winter service equipment, swing flaps, crane behind house, emergency stop, grapple control, foldable, 2-point hydraulic outrigger, radio remote control, 2x hydr. extensions, yellow environmental sticker Wheelbase: 3900 mm Body: Meiller 3-sided tipper with Atlas AK 85.2 A2 crane, radio control front attachment plate, ABS, drum brakes on front and rear axles, Webasto Air Top 2000 auxiliary hot-air heating, parameterizable special module (PSM). Load diagram: 3.85m- 2250kg, 5.55m-1520kg, 7.25m-1140kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdedpfovhllvex Aqlsc - .

Condition: used, mileage: 2,95,019 km, power: 210 kW (285.52 HP), first registration: 12/2006, fuel type: diesel, empty load weight: 10,710 kg, maximum load weight: 7,290 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 4,150 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, crane, cruise control, differential lock, low noise, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel superstructure, license plate house, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, cruise control, auxiliary heating, switch 8, ABS (anti-lock braking system), constant throttle, differential lock, driving lamp, work lamp, rotating beacon, storage box, leaf suspension, trailer hitch air-light-hydr, low-noise G1, winter service equipment, lashing eyes, U-protection, pendulum flaps, roof hatch, crane behind house, emergency stop, grapple control, foldable, high stand, 2-point hydraulic support, 2x hydr. extensions, green environmental sticker Wheelbase: 3900 mm Body: Meiller 3-sided tipper body with aluminum side wall elevations (250mm) & crane Atlas AK 85.2-A2 crane hours 6587h. Front attachment plate, ABS, hot air auxiliary heating 2000W, rear engine output for hydraulic pump max. 200Nm. Load diagram: 1.91m-4200kg, 3.85m-2250kg, 5.55m-1520kg, 7.25m-1140kg! Loading height approx. 1550mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bodpfevhltyox Aqljdc - .

Condition: new, wheelbase: 3,900 mm, color: white, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Wheelbase: 3900 mm Structure: Subframe type 9, with stamp, 3x available. Subframe type 9 for 2- and 3-axle trucks, Meiller No. 1102 1002 532, for Actros AK wheelbase 3900mm. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Bjdsi Rp S Uspfx Aqledc

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Bodpfx Aoq Nf Tvjqlodc Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: used, functionality: fully functional, mileage: 3,24,354 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. Bodpfx Aqezap Ddjlsdc MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed.

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Bjdpey Emw Hefx Aqljdc Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: new, functionality: fully functional, power: 460 kW (625.43 HP), fuel type: electric, Year of construction: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. has established itself as a premier global manufacturer, providing integrated Sand and Gravel Production Lines that transform raw minerals into precision-graded materials. A MINGYUAN production line is not just a collection of machines; it is a synchronized system engineered for maximum throughput, minimal waste, and low operational costs. -1. Core Equipment Configuration The MINGYUAN system follows a multi-stage reduction philosophy to ensure particle shape and quality. Bdsdpfjq Nywxsx Aqloc Vibrating Feeder (GZQ Series):Ensures a continuous, uniform flow of raw material to the primary crusher. It features grizzly bars to pre-screen dirt and "fines," protecting the crusher from unnecessary wear. Primary Jaw Crusher (PE/C-Type): The "workhorse" designed for the initial breakdown of hard rocks (granite, basalt, river pebbles). MINGYUAN’s jaw crushers utilize a deep-chamber design for high crushing ratios. Secondary Crusher (Impact or Cone):Impact Crusher (PF Series): Ideal for medium-hard materials; produces highly cubic final products with excellent grain shape. Cone Crusher (Hydraulic/Spring): Preferred for high-hardness materials (granite/quartz) due to its high efficiency and low wear-part consumption. Sand Making Machine (VSI Series): The "finisher." It uses "stone-on-stone" or "stone-on-iron" technology to shape aggregates and produce high-fineness artificial sand. Vibrating Screen (YK Series): A high-frequency circular screen that classifies material into specific sizes (e.g., 0-5mm, 5-10mm, 10-20mm, 20-40mm). * Sand Washing Machine (XSD/LSX Series):Removes mud and impurities to ensure the final product meets strict concrete and asphalt standards. 2. Technical Specifications & Performance MINGYUAN offers scalable solutions tailored to project size, ranging from small-scale mobile units to massive industrial stationary plants. | Feature | MINGYUAN Standard Specifications | | Production Capacity | 50 – 600 $t/h$ (Tons Per Hour) | | Max Input Size | Up to 1,100mm (depending on Jaw model) | | Finished Product Size | 0-5mm, 5-10mm, 10-20mm, 20-40mm (customizable) | | Power System | High-efficiency AC Motors or Diesel-Electric Hybrid | | Control System| Centralized PLC Control Cabinet with safety interlocks | | Materials Processed | River stone, granite, limestone, basalt, iron ore, and C&D waste | 3. The MINGYUAN Technical Advantage What differentiates MINGYUAN in the global market is the "One-Stop" solution approach: 1. High Crushing Efficiency:Optimized crushing cavities increase the contact area between the material and the liners, reducing energy consumption per ton. 2. Environmental Compliance: Systems can be equipped with advanced dust suppression misting and fully enclosed belt conveyors to meet stringent urban environmental regulations. 3. Durability: Wear parts (jaw plates, blow bars, mantles) are manufactured using high-manganese and high-chrome alloys, significantly extending the time between maintenance cycles. 4. Flexible Layouts: Whether for a mountain quarry or a tight urban recycling site, MINGYUAN provides customized CAD layouts to optimize gravity-flow and reduce conveyor length. 4. Conclusion A MINGYUAN Sand and Gravel Production Line represents a strategic investment in efficiency. By combining primary strength with precision finishing and washing, the brand ensures that every ton of raw material is maximized for its commercial value.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- Bdodpoq I Nviefx Aqlsc ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: used, functionality: fully functional, mileage: 3,32,304 km, power: 353 kW (479.95 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Three-phase alternator 28 V, 120 A, 3,360 W, LIN. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque. Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Bdsdjy Sw Nyepfx Aqlec Side flaps, left folding and right fixed.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm Bodsy Dcrwopfx Aqljdc - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm Bdedpsxx A Ekjfx Aqljc 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Bedpfjy Ud N Ssx Aqlodc Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Bodpfszab Rcjx Aqledc Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: used, Technical details: lifting capacity: 1,0 t Arm length: 3500 mm height lower edge cantilever arm: 3900 mm cantilever arm length from center column: 3750 mm lifting height max. hook position: 4000 mm column diameter: 400 mm total power requirement: 0,76 kW dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! Bdjdpeu Nxnkjfx Aqljc *

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) Bodpfx Asu Nlpbeqlsdc *

Condition: used, Year of construction: 1986, Technical details: x-travel: 1120 mm y-travel: 345 mm Bdedpou Iy Hlefx Aqlec z-travel: 400 mm spindle taper ISO: SK50 spindle head swivable left - right: 90° ° Distance rear edge of table to column guideway: min./max.: 125 / 470 mm max. torque on the spindle: 280 kpm range of revolution per miute: 28 - 1400 / 18step U/min feed:: X/Y: 16 - 800 und Z: 5 - 250 mm/min Table dimensions: 1600 x 460 mm table surface area: 1400 x 330 mm table load: 1,5 t total power requirement: 14,5 kW machine weight approx.: 3900 kg dimension machine xH: 2,7 x 2,0 x 2,1 m dimensions electric cabinet: 0,47 x 0,8 x 1,5 m Equipment: 3-axis measuring device EISTA VISULESTA II E Accessories: Machine vice 155mm 2x counterholder and shaft 4x machine feet 2x cranks (for machine table and for vice) *

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 2,982 h, load capacity: 8,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,900 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 20,500 kg, empty load weight: 12,500 kg, total height: 3,800 mm, total length: 2,700 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C8000 – 2008 | 2982 HOURS | DIESEL | DUPLEX 4600 mm | WIDE FORK POSITIONER | FREE LIFT ## ✅ Ready to work from day one – no additional investment, no risk ### 🔹 Why this forklift? Looking for a machine that will keep your operation running without downtime? This COMBILIFT C8000 is a fully serviced and proven machine — ready for immediate operation with no hidden costs. ✔️ Fully serviced (oils, filters, and complete component inspection) ✔️ Technical and visual condition: like new ✔️ Only 2982 operating hours – genuinely low usage ✔️ New tires – no additional investment required --- ## 📋 Key Specifications 🏋️ Capacity: 8,000 kg ⛽ Fuel type: DIESEL 📏 Mast: Duplex – 4600 mm ↔️ Fork Positioner: 3900 mm 🔩 Fork Length: 1500 mm 🚪 Cabin: Enclosed cabin with heating --- ## ⚙️ Full Technical Specification ### 📌 General Information 📅 Year of manufacture: 2008 ⏱️ Operating hours: 2982 🏋️ Capacity: 8000 kg 📍 Load center: 600 mm ⚖️ Truck weight: 12,500 kg ### 📈 Mast & Lifting 🔧 Mast type: DUPLEX ⬆️ Lifting height: 4600 mm ### 🔩 Forks & Attachments ↔️ Wide Fork Positioner: 3900 mm 📏 Fork Length: 1500 mm ### 📐 Dimensions Bdsdpfx Ajzaw E Noqlec 📏 Height: 2800 mm 📏 Length: 2700 mm 📏 Width: 2800 mm 📏 Overall mast height: 3400 mm ### ⚙️ Drive & Tires 🛞 Tires: Super Elastic (100%) – NEW --- ## 🛠️ Equipment ✔️ Enclosed cabin ✔️ Wide fork positioner ✔️ Free lift ✔️ Heating --- ## ⭐ Condition 🔧 Technical condition: 5/5 – fully serviced ✨ Visual condition: refurbished, like new, corrosion-free --- ## 🏭 Ideal For 🌲 Timber industry 🏗️ Steel industry 📦 Warehouses with narrow aisles 📏 Handling long and oversized loads 🏢 Indoor and outdoor applications --- ## 💼 What You Are Buying You are not buying a "used forklift." You are buying a professionally prepared and fully tested machine: ✔️ Every forklift undergoes complete testing before sale ✔️ Ready for immediate implementation ✔️ Online live presentation available ✔️ Delivery directly to your company available --- ## 🌍 Delivery & Support 🚛 Transport across all Europe 📦 Comprehensive logistics service 💳 Leasing and financing assistance 🔧 After-sales support --- ## 🤝 Why FT LOGISTICS? We deliver forklifts that work — not machines that spend time in service. 🏢 Over 100 machines available 🔧 In-house service and equipment preparation 🌍 Experience across Europe ⭐ Hundreds of satisfied customers --- ## 📞 Contact Us Today FT LOGISTICS ✅ Quality we stand behind. ✅ Service you can trust.

Condition: used, functionality: fully functional, Year of construction: 2007, control type: CNC control, For sale: CO₂ Tube Laser BLM Group Adige LT712D The machine is fully operational and in daily use in production. Inspection and testing on site are possible. The laser source ROFIN RF tube DC025 has been replaced with a new one. The new source has only 2386 operating hours. Specifications: Model: BLM Adige LT712D CO₂ tube laser Year of manufacture: 2007 Laser source: Rofin RF tube DC025 New laser source operating hours: 2386 h Total machine operating hours: 89186 h Automatic tube loading and unloading CNC control Autofocus cutting head Suitable for cutting round, square, and rectangular profiles Automatic profile centering and measurement devices Professional industrial construction Scope of supply: Bdedpfjy R Tt Ssx Aqlsc Rofin DC-K laser integration AK-HP 591-LT712 cutting head 5” focusing system 6500 mm tube system Automatic unloading module The machine is suitable for the production of metal constructions, furniture, automotive, tubular structures, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 65,000 kg, Year of construction: 2026, FABO Mobile cone crusher with post screen FTC300S Fabo mobile cone crushers are designed for durability and long service life due to the robust chasis and wear resistant components the improved design let the Wearing parts are easily accessible and replaceable. And also ensure that maintenance is carried out in complete safety. User friendly has always been the key. Simplifying the operation of a complex machine has been done in Fabo mobile cone crusher Control is by wireless remote control or by cable connection . Starting the mobile cone crusher is as simple as pressing the start button.The running parameters controlled by PLC program.and all electrıcal hardware and software can be controlled via to internet connection at anywhere in the world . The ftc 300S mobile cone crushers from the FTC 300S range are capable of high reduction ratios and excellent cubical shape at highly output rates. They are used in various applications such as aggregate crushing, mining and recycling. In addition, the machine's compactness, mobility and dust reduction system make it ideal for contractors or aggregate producers working in urban areas. Using Fabo cone crushers, these units are powerful crushers capable of crushing medium-hard to hard natural stone, including abrasive varieties. Ftc 300 hybrid mobile cone crushers equipped with single deck post screen to get desired exact size for final product and available in a range of sizes and features. They can be supplied as standard or customised according to customer needs Bsdoy S Alajpfx Aqlodc

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 2,982 h, load capacity: 8,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,900 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 20,500 kg, empty load weight: 12,500 kg, total height: 3,800 mm, total length: 2,700 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C8000 – 2008 | 2982 HOURS | DIESEL | DUPLEX 4600 mm | WIDE FORK POSITIONER | FREE LIFT ## ✅ Ready to work from day one – no additional investment, no risk ### 🔹 Why this forklift? Looking for a machine that will keep your operation running without downtime? This COMBILIFT C8000 is a fully serviced and proven machine — ready for immediate operation with no hidden costs. ✔️ Fully serviced (oils, filters, and complete component inspection) ✔️ Technical and visual condition: like new ✔️ Only 2982 operating hours – genuinely low usage ✔️ New tires – no additional investment required --- ## 📋 Key Specifications 🏋️ Capacity: 8,000 kg ⛽ Fuel type: DIESEL 📏 Mast: Duplex – 4600 mm ↔️ Fork Positioner: 3900 mm 🔩 Fork Length: 1500 mm 🚪 Cabin: Enclosed cabin with heating --- ## ⚙️ Full Technical Specification ### 📌 General Information 📅 Year of manufacture: 2008 ⏱️ Operating hours: 2982 🏋️ Capacity: 8000 kg 📍 Load center: 600 mm ⚖️ Truck weight: 12,500 kg ### 📈 Mast & Lifting 🔧 Mast type: DUPLEX ⬆️ Lifting height: 4600 mm ### 🔩 Forks & Attachments ↔️ Wide Fork Positioner: 3900 mm 📏 Fork Length: 1500 mm ### 📐 Dimensions 📏 Height: 2800 mm 📏 Length: 2700 mm 📏 Width: 2800 mm 📏 Overall mast height: 3400 mm ### ⚙️ Drive & Tires 🛞 Tires: Super Elastic (100%) – NEW --- ## 🛠️ Equipment ✔️ Enclosed cabin ✔️ Wide fork positioner ✔️ Free lift ✔️ Heating --- ## ⭐ Condition 🔧 Technical condition: 5/5 – fully serviced ✨ Visual condition: refurbished, like new, corrosion-free --- ## 🏭 Ideal For 🌲 Timber industry 🏗️ Steel industry 📦 Warehouses with narrow aisles 📏 Handling long and oversized loads 🏢 Indoor and outdoor applications --- ## 💼 What You Are Buying You are not buying a "used forklift." You are buying a professionally prepared and fully tested machine: ✔️ Every forklift undergoes complete testing before sale ✔️ Ready for immediate implementation ✔️ Online live presentation available ✔️ Delivery directly to your company available --- ## 🌍 Delivery & Support 🚛 Transport across all Europe 📦 Comprehensive logistics service 💳 Leasing and financing assistance 🔧 After-sales support --- ## 🤝 Why FT LOGISTICS? We deliver forklifts that work — not machines that spend time in service. 🏢 Over 100 machines available 🔧 In-house service and equipment preparation 🌍 Experience across Europe Bjdpezamn Hsfx Aqlsdc ⭐ Hundreds of satisfied customers --- ## 📞 Contact Us Today FT LOGISTICS ✅ Quality we stand behind. ✅ Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 2,982 h, load capacity: 8,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,900 mm, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 20,500 kg, empty load weight: 12,500 kg, total height: 3,800 mm, total length: 2,700 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C8000 – 2008 | 2982 HOURS | DIESEL | DUPLEX 4600 mm | WIDE FORK POSITIONER | FREE LIFT ## ✅ Ready to work from day one – no additional investment, no risk ### 🔹 Why this forklift? Looking for a machine that will keep your operation running without downtime? This COMBILIFT C8000 is a fully serviced and proven machine — ready for immediate operation with no hidden costs. ✔️ Fully serviced (oils, filters, and complete component inspection) ✔️ Technical and visual condition: like new ✔️ Only 2982 operating hours – genuinely low usage ✔️ New tires – no additional investment required --- ## 📋 Key Specifications 🏋️ Capacity: 8,000 kg ⛽ Fuel type: DIESEL 📏 Mast: Duplex – 4600 mm ↔️ Fork Positioner: 3900 mm 🔩 Fork Length: 1500 mm 🚪 Cabin: Enclosed cabin with heating --- ## ⚙️ Full Technical Specification ### 📌 General Information 📅 Year of manufacture: 2008 ⏱️ Operating hours: 2982 🏋️ Capacity: 8000 kg 📍 Load center: 600 mm ⚖️ Truck weight: 12,500 kg ### 📈 Mast & Lifting 🔧 Mast type: DUPLEX ⬆️ Lifting height: 4600 mm ### 🔩 Forks & Attachments ↔️ Wide Fork Positioner: 3900 mm 📏 Fork Length: 1500 mm ### 📐 Dimensions 📏 Height: 2800 mm 📏 Length: 2700 mm 📏 Width: 2800 mm 📏 Overall mast height: 3400 mm ### ⚙️ Drive & Tires 🛞 Tires: Super Elastic (100%) – NEW --- ## 🛠️ Equipment Bedpjzamnyefx Aqljdc ✔️ Enclosed cabin ✔️ Wide fork positioner ✔️ Free lift ✔️ Heating --- ## ⭐ Condition 🔧 Technical condition: 5/5 – fully serviced ✨ Visual condition: Refurbished, like new, corrosion-free --- ## 🏭 Ideal For 🌲 Timber industry 🏗️ Steel industry 📦 Warehouses with narrow aisles 📏 Handling long and oversized loads 🏢 Indoor and outdoor applications --- ## 💼 What You Are Buying You are not buying a "used forklift." You are buying a professionally prepared and fully tested machine: ✔️ Every forklift undergoes complete testing before sale ✔️ Ready for immediate implementation ✔️ Online live presentation available ✔️ Delivery directly to your company available --- ## 🌍 Delivery & Support 🚛 Transport across all Europe 📦 Comprehensive logistics service 💳 Leasing and financing assistance 🔧 After-sales support --- ## 🤝 Why FT LOGISTICS? We deliver forklifts that work — not machines that spend time in service. 🏢 Over 100 machines available 🔧 In-house service and equipment preparation 🌍 Experience across Europe ⭐ Hundreds of satisfied customers --- ## 📞 Contact Us Today FT LOGISTICS ✅ Quality we stand behind. ✅ Service you can trust.

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Bdjdpfx Asy Smlwoqloc Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Bjdpfxoy Slzdj Aqlodc Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 Bdsdpfox N T H Asx Aqloc - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications Bjdpfx Aox N T Rbsqlodc - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.