Used 4 Column Punching Tool for sale (82,950)

Condition: used, 4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg Iasdpfx Aod Sgaaomyjt

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -4 pillars: punching tool -Take bolt: 40 mm -Dimensions: 340/300/H235 mm -Weight: 72 kg Iasdpfx Asdxnlgemyot

Condition: used, 4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm Iaedpfx Amju I Hpmoyjt -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation Isdswva I Hspfx Amyeat - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm Ijdpfx Asdzp Tcomyjat ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Isdpeyx A Unefx Amyeat -Punch tool: 2 columns, stroke 12 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 535/350/H267 mm -Weight: 142 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm Iaodpfx Ajyv Aptomyot -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos Iaodpfxehb N Ate Amyjt -Dimensions: 450/265/H305 mm -Weight: 94 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 column punching tool Iajdpfxed R A E Aj Amyst -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Iodpfxsf Sa N Uo Amyeat -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm Iaodsmxpt Sopfx Amyet -Weight: 30 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm Ijdju I Hptepfx Amysat -Weight: 11.7 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm Iasdpfxodxxrqj Amyjt -Weight: 132 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Iaodpfx Amshb N Aljyot -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, Isdpfx Amedxxrrsysat -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg Iedpfx Amsu I Hpysysat

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Isdpoivql Sefx Amysat -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Iaodscw Dg Djpfx Amyot Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm Isdpfjy Nbtkox Amyjat MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Iaedpfey R Elysx Amyot Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2016, Mossini press Press force: 6,300 kN Stroke rate: 25-53 spm Stroke length: 400 mm Slide adjustment: 500 mm Installation height: 1,200 mm Iasdpfxsy Rtfnj Amyet Table size: 3,200 x 1,200 mm Millutensil coil line Strip width up to 1,300 mm Strip thickness: 0.5–5.0 mm Coil carrying capacity: 12,000 kg

Condition: excellent (used), Year of construction: 2013, Mossini press Iaodpey Rrwpofx Amyst Press force: 10,000 kN Stroke rate: 20–55 rpm Stroke height: 350 mm Ram adjustment: 300 mm Shut height: 1,450 mm Table size: 4,500 x 2,500 mm 2 sliding tables Millutensil coil line Strip width: 250–1,850 mm Strip thickness: 0.5–4.0 mm Coil load capacity: 24,000 kg

Condition: excellent (used), Year of construction: 2019, Mossini Press Press force: 4,000 kN Stroke rate: 28/82 rpm Stroke height: 250 mm Ram adjustment: 350 mm Shut height: 900 mm Table size: 2,850 x 1,300 mm Ijdpfxjy Rrtkj Amysat Millutensil Coil Line Strip width: 100–800 mm Strip thickness: 0.5–4.0 mm Coil carrying capacity: 10,000 kg

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition Iedpfx Amey E Abnjyeat * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: new, Cluster tool C/D/E station thick turret punch tool for Amada, Lvd Iajdoiq Dmmopfx Amyst Original style punch compatiable for Amada/Mate guide holder quick adjustable style compatiable for Mate/Wilson 90 guide holder