Used Abc Kompressor for sale (216)

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Rjdpfxjmnqkij Anyjcf

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   Rcjdsziawropfx Anyef TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Stationary reciprocating compressor with a balanced horizontal configuration. Three-stage, double-acting design with intercooler, crossheads and circulating-water cooling. Capacity: 17.88 m³/min. Discharge pressure: 16 bar. Speed: 721 rpm. Crankshaft power input: 199.4 hp. Serial No.: 21968. Rcsdpjzvcfrsfx Anyof

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Redpfx Ansy Hiuqoyjcf

Condition: excellent (used), Year of construction: 2017, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm Rcodpfx Anjzwhkpsyjf 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Coolant system

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. Rcsdpfjxz Eg Njx Anyof The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: used, CNC lathe INDEX ABC Rjdpezwqtmjfx Anyecf

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW Redpfor Ha Ehjx Anyjcf - The cabin is available in different colors

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside Rcedpfenbdlbsx Anysf (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) - Service door: 640x1800 mm Rjdpfx Anjm Tv I Asyocf - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Year of construction: 1994, condition: good (used), Manufacturer: Boge Redshtq Dvepfx Anyjcf Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “Hotronix Thermal Transfer Press XRF” Item for Sale: 1x Hotronix Thermal Transfer Press XRF with the following features: Includes compressor Condition: Rsdozpwzuspfx Anyocf This listing is for a used device that may show signs of wear (minor scratches or discoloration). The device has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 2007, machine/vehicle number: 402235, Spindle bore: 36 mm, maximum spindle speed: 7,000 rpm. C-axis, 1 turret, X/Z-axis, 7-station + synchronized spindle, driven tools, 1 tool turret, X/Z-axis, 6-station, driven tools, control system: INDEX C 200-4 D, back-side machining, workpiece removal, conveyor belt, chip conveyor, bar loader MBL 52/3200. Drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Redpfx Aozqy U Tsnyjcf

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop Rcedjxm U Exepfx Anyjf - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Redpfxow Tbtko Anyocf Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: excellent (used), Compressor type: Dry air Redowcgc Rjpfx Anyocf Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Motor power: 90kW

Condition: good (used), Year of construction: 1998, INDEX ABC multi-spindle automatic lathe with INDEX C 200-4 control, serial number 400923, year of manufacture 1998, operating hours estimated at approximately 52,924 hours according to management. Includes chip conveyor DGS and bar feeder FMB 5-42. Rcsdpfx Aoztc Rpenyjf

Condition: used, Year of construction: 2003, Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data - Free air delivery: 2,100 m³/h (35 m³/min) - Operating pressure: 40 bar - Design pressure (PS): 42 bar - Speed: 480 rpm - Shaft absorbed power: 355 kW - Voltage: 400 V - Year of manufacture: 2003 - Application: PET bottle blowing Scope of delivery - 1 × High-pressure compressor 40 bar CE68 ASG - 1 × Refrigeration dryer - 1 × Electrical control cabinet Condition - Still installed and electrically connected Redpfszvc Nwox Anyjcf - Available for inspection on site Availability Immediately available.

Condition: used, Year of construction: 1996, INDEX ABC multi-spindle automatic lathe with INDEX control system, serial number 400923, year of manufacture 1996, operating hours estimated at approximately 57,805 hours according to management; chip conveyor by KNOLL; bar feeder FMB Turbo 5-42/3200; known damage and defects: defective. Redeztc N Ejpfx Anyjcf

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display Redpexna U Uofx Anyscf - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Rodpfjzu Sz Tex Anyscf

Condition: good (used), Year of construction: 2001, INDEX ABC multi-spindle automatic lathe with INDEX control, serial number 401566, year of manufacture 2001, operating hours estimated at approximately 44,285 hours according to management, chip conveyor DGS, bar feeder FMB 5-42/322/A. Rcedsztc Rvopfx Anyjf

Condition: used, Year of construction: 1985, operating hours: 4,000 h, Air compressor – the unit is fully functional and ready for use. Rsdexbwlkjpfx Anyscf

Condition: used, Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Rcsdpfx Anezgcp Soyef Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Rcsdozvu Ryspfx Anysf Technical Specification Counter Spindle Yes Driven Tools Yes