Used Berger Lahr Rdm 599/50 for sale (34,176)

Condition: used, Servo motor, electric motor, DC motor, stepper motor Dcjdpeq Adp Rjfx Al Aok -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Dsdsw Ikbmspfx Al Ajck

Condition: ready for operation (used), Berger Lahr VRDM397/50LWCEB / BRS397W361FCA stepper motor, serial number: 2404104758 + Binder 76 43108H07 rotary encoder. Connector partially broken, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Dsdpfx Aloi D E Npj Asck

Condition: used, Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm Dodon Nbnmjpfx Al Asck -Weight: 2.5 kg/pc.

Condition: ready for operation (used), Berger Lahr SR 5-20.500.1 servo stepper motor controller, used, 100% functional. Dodpoi D E I Isfx Al Aeck

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter Djdjn Nbmwjpfx Al Aock -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos Dodji I Hdcopfx Al Asck -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor Dedpfxjpvqzaj Al Aeck -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioning system LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), VRDM 3910/50 LWB motors, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, in very good condition, 100% functional. Dcodpfji Eclyox Al Aek

Condition: good (used), functionality: fully functional, PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor, Heidelberg Suprasetter A105/74/105 Classic second-hand, tested All offers are subject to prior sale Dcjdpfjyitl Dex Al Aok

Condition: new, SIG Positec / Berger Lahr TLC 532 F servo drive SN:1110070929, unused in opened original packaging, 100% functional, delivery as per photos Dcjdpsx Eu Rzsfx Al Aek

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Dsdpfxeq Nn Hcs Al Aeck The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Schmalenberger DMG 2 3208/2 50/60HZ centrifugal pump, the clamping plate cover is missing (see photo), serial number as per photo, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Dedpfx Aloi D Nu Ae Aock

Condition: new, Schmalenberger ZV 50-20/2/7.5 centrifugal pump, unused, 100% functional, new price €4200 net. Please request separate quotation for shipping costs! Dcedpfx Asi D Nvgel Ask

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device Dodpfx Aljp Atips Aeck - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: used, mileage: 4,21,691 km, power: 375 kW (509.86 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, VEHICLE NUMBER: BH2022 ----* Interior: * 1 bed * Pocket spring mattress * Automatic climate control * Auxiliary heater * Cool box with freezer compartment * OBU preparation * Radio with USB/AUX connection and Bluetooth * CB radio * Sunroof * Electrically operated windows and exterior mirrors * Air-suspended driver's seat with seat heating * Vehicle information system ----* Technology: Dcedpfxszkxqgo Al Aok * i-shift AT2612F transmission with additional off-road program * Emergency braking function * Lane keeping assist * VEB+ engine brake * Impulse retarder * Cruise control and brake assistant * Differential lock and traction control * Tilting hydraulics * Auxiliary drive, engine side * Auxiliary drive, transmission side * Leaf-air suspension * X-Track 4x4, switchable * Rear axle RSS1344D * Axle load front 8.0t / rear 13t * Wheelbase 3,700mm ----* Exterior: * Tires, front 385/65 22.5 5mm / 5mm * Tires, rear 315/80 22.5 L 9mm / 9mm / R 15mm / 15mm * Aluminum rims ALCOA * Fifth wheel height 1,250mm * Fuel tank 450L diesel / 60L AdBlue * Globetrotter cab, wrap can be removed * Roof rack with long-range headlights * Work lights * Rotating beacons * Air horn, left and right * External sun visor * Unladen weight 8,141 kg * TÜV/MOT 09/2026 SP * Lease-purchase example: 60-month term, €589 monthly rate, 10% down payment (can also be your used vehicle), 10% final payment * Delivery to your location possible. We offer trade-in, leasing, and financing options. We can make it happen!

Condition: used, mileage: 49,000 km, power: 478 kW (649.90 HP), first registration: 02/2021, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2021, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Scania R 650 truck / recovery vehicle AWU 410 8x4 Available in multiple units!!! 2021 / 2023 / 2024 – all are almost identical We also have R660 and R770 models under construction / completion scheduled for October 2024 Unladen weight: 26,900 kg / suitable for registration everywhere Transportable load: 7,100 kg at 80 km/h OMARS or World Power 120t superstructure with a 10-meter recovery arm / double extension 4 x hydraulic outriggers on the sides, front and rear, 20t each / front with 12t winches on each side Any reasonable special request can be accommodated Dodpekkt Dmsfx Al Asck Original analog tachograph installed! Paper chart! 2x 20t rear winches with two speeds Wheelbase: 5,750 mm and 6,150 mm Scaninavia Conti winter tires Full remote control for the entire superstructure (dimmable) / second remote control for winches only Start/Stop and engine speed increase at the rear control panel 15t axles at the rear / 9t axles at the front Technical total weight: 160,000 kg Power upgrade to 950 hp with warranty available upon request Hydraulic generator 220 / 380 volts, activated by push button, available upon request V4A stainless steel boxes with LED lighting / everything galvanized or made of V4A / pneumatic LED light mast The chassis has all available options Cab suspension: air / air-conditioned leather seats / navigation system with sound system / cabinets / electric sunroof and much more We have more vehicles under construction / Arocs 4153 8x8 with turbo retarder clutch / Scania S and R 660 8x4 – equipment can still be customized Errors and omissions excepted / we only sell according to our terms and conditions

Condition: ready for operation (used), Schmalenberger ZHT07 32-08/2 centrifugal pump, serial number: 2015000251/10, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dodpfjzh Sdzox Al Asck

Condition: used, Test pump, pressure device, measuring device Dcedpfx Aochyxusl Ask -with: pressure display -Max. Pressure: 60 bar -High pressure hose -Number: 2x devices available -Price: per piece -Dimensions: 490/165/H260 mm -Weight: 7.2 kg

Condition: good (used), Frame press, gluing press Dsdjb A H Dhepfx Al Aeck -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new, combined universal wide belt sanding machine – brushing machine – polishing machine in a portal design. Sanding length and width can be customized according to customer requirements, including 2 parallel sanding belts for 2 workstations for pre-sanding and finishing without belt changes, as well as a brushing and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for pre- and fine sanding, structuring (brushing) and polishing, as well as high-gloss polishing of surfaces made of various materials – coated workpieces, natural workpieces, various metal sheets made of stainless steel / aluminum / brass / copper / bronze, and various plastics. Combined wide belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height. Motorized movement of the brushing and polishing unit from left to right and back. Manual movement of the support table forwards and backwards. Motorized adjustment of the support table up and down. Dodpfxszhkp No Al Asck Work table size 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions 8,200 mm x 150 mm Drive power of the brushing and polishing unit 3 kW Drive power of the belt sanding unit 3 kW Dimensions approximately 4,200 x 1,600 mm x H 2,100 mm Weight approximately 1,000 kg Other sizes available.

Condition: new, Year of construction: 2026, Brand new precision vertical slotting machine – a machine of exceptionally high quality. CNC-controlled vertical slotting machine with two, three (or four) CNC axes and electronic rotary table control with a positioning accuracy of 0.001°. Ideal for the efficient production of keyways (including tapered and tangential slots), spline hubs, internal and external gears, racks, etc. CNC control with 10" color display and touchscreen – software for roughing, finishing, and fine finishing (enabling surfaces of the highest possible quality). Stroke range of slotting ram: 10 to 250 mm Slotting ram speeds: 22 to 90 strokes/min, infinitely adjustable Slotting ram swivel range: +/- 20° Rotary table diameter: 450 mm Rotary table bore Ø: 135 mm Maximum table load: 1,250 kg Table travel (X/Y): 250 x 225 mm Ram drive servomotor power: 3 kW Machine dimensions without control console: 1.3 x 1.45 m x approx. height 2.6 m Machine weight approx. 1,700 kg - Automatic electronically monitored central lubrication system for the guideways Dcedpfx Ajzhkkyel Ajk - Cutting oil system for coolant supply to the slotting tools Other models available.

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm Dcodpezhkgzsfx Al Ask - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Axis - Y - (press beam up and down) Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Maximum bending length 2,500 mm Distance between side columns 1,700 mm Dcodpozhi Udsfx Al Aek Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.

Condition: refurbished (used), Kellenberger 1500 U-175 – High-Precision Universal Cylindrical Grinding Machine Universal cylindrical grinding machine for external and internal grinding (internal grinding attachment included). - Centre distance: 1,500 mm - Centre height: 175 mm - Complete retrofit, fully dismantled and rebuilt component by component: guideways reconditioned, bearings replaced, new electrical installation and control cabinet, complete repaint, and machine geometry restored to original factory precision. - Equipped with Siemens servo motor, frequency inverter and Fagor digital readout (Fagor). - Condition comparable to a new machine, ready for immediate production. - Available with a wide range of accessories. Djdpfx Alewqlyke Aock - Inspection and live demonstration under power available. Availability: Immediate. 1000U version: Currently undergoing refurbishment.