Used Chipper Canter Heinola Sm for sale (3,020)

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Gkjdpfx Aewfr Nuep Dec

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, A fully functional used Heinola chipper canter with a log centering conveyor is available for sale. Gksdoyg Rukspfx Ap Dec The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing.

Year of construction: 1990, condition: used, functionality: fully functional, A fully functional used Heinola chipper canter with a cant centering conveyor is available for sale. Gedpfxoyikvwj Ap Dekc The chipper canter is equipped with two 132 kW electric motors. The brochure is attached to the listing.

Condition: used, Chipper canter line IDC000094 - Soderhamn Eriksson/Kockum 240 12 2C - with 132 kW electric motors, pulling chain in the middle, outfeed pulling arms. - Soderhamn Eriksson/Kockum 240 12 2C - with 110 kW electric motor - - Outfeed with side falling ability - Centering feed table with moving arms - Max. log diameter: 500 mm - Min gap between discs: 0 mm Gkjdoupt Tmspfx Ap Dec - each chipper canter weight: ~ 4000 kg

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Gedpfxezvy Eio Ap Djkc

Condition: refurbished (used), Chipping speed. Gkjdpfxogmtf Ej Ap Dec

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Gjdpfx Apjyka Nro Dekc

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 01747, power: 90 kW (122.37 HP), overall weight: 3,500 kg, wood chippers Heinola TT-75RS After major overhaul, 90 kW engine; The machine is currently undergoing a major overhaul and will be available in November 2026. We can also offer a Bruks vibrating conveyor. Godpfez Abzxex Ap Djkc

Condition: reconditioned (used), functionality: fully functional, A chipper canter/4-band saw/rotary gang saw line with one edger is available for sale. All the mechnical parts will be checked by our professional team before delivery to a potential customer. Worldwide transportation can be arranged. Gkodpfx Apoxaztvj Doc

Condition: reconditioned (used), functionality: fully functional, empty load weight: 2,400 kg, Compact sawing machine with mechanical centering infeed, el.motors 2x75 kW and 2x90 kW, machine can be equipped with edging block and electric-operating cabinet with frequency converters TECHNICAL DETAILS Top diameter: 80-230 mm Maximum log diameter: 350 mm Minimum log length: 2.4 m Cant height in Chipper Canter: 60-232 mm Cant width in Chipper Canter: 70-210 mm Line speed: 70-150 m/min Gjdpfx Apoxfrmwo Dokc Chip length: 20-30 mm

Condition: used, Year of construction: 2019, functionality: fully functional, color: other, Wood shredder in good condition. Immediately ready for use. Gkodpjz R I S Hsfx Ap Dec The shredder was purchased from a bankruptcy estate and is now available for resale. Approximate dimensions: 110/240/285 cm, year of manufacture 2019.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Gkjdpfxsqmi Ire Ap Doc Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Gjdpjwa Nrpsfx Ap Dokc

Condition: good (used), log rotator, scanner, and program Gksdezw Enrspfx Ap Dsc

Condition: good (used), Green sorting line with 55 pockets, Timmer, FinScan (BoardMaster). Godpfxozuc U Rj Ap Dokc

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Gsdpsxyqncefx Ap Dekc

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 626963, Heidelberg - SM 74-2 H Number of copies produced 74.077.397 Year of Production -2003 Max-Sheet Size 530 × 740 mm (20.87 × 29.13 in) -- 2/0—1/1 Gkedpfx Aoz Nz S Ajp Dsc Max.printing Speed 13000 /h CP 2000 Center, AutoPlate system, Dampening rollers Alcolor Automatic Wash rollers and Cylinder Ink Fountain-Ink zone motor Electric equipment- 50Hz 380 V Pull Lay control-Electronic Powder spray-Alphathronic 200 Circulation and cooling ---Dampening Baldwin Device Available immediately

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Gsdjz Eht Dspfx Ap Djkc Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: * Manufacturer: Kaeser Kompressoren * Model: SM 11-TA 11-280 * Type: Screw compressor * Motor power: approx. 11 kW * Compressed air tank: 280 liters * Compressed air treatment: Refrigerant dryer * Drive: Electric motor * Design: Compact compressed air station with tank and dryer Features and advantages: * High-performance screw compressor for commercial use * Integrated compressed air tank for buffering the compressed air Gedpfxoz Rkp Hj Ap Dokc * Refrigerant dryer to reduce moisture in the compressed air * Compact design for space-saving installation * Suitable for workshops, trades, and smaller production facilities * Proven Kaeser quality and reliable screw compressor technology

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine. Gjdpfx Apoz Ikvao Djkc

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 500 mm, spindle motor power: 15,000 W, rotational speed (max.): 4,000 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, quill travel distance: 210 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, spindle nose: 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 54 mm Max. workable diameter from chuck: 250 mm Max. workable length: 500 mm Max. rotating diameter: 520 mm MAIN SPINDLE: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 6’’ Spindle bore: 80 mm Godpfx Apez Ig Ure Dskc Chuck diameter: 250 mm Motor power: 11/15 kW (50%) TAILSTOCK: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 5’’ Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Rotation time: 0.6 sec POWERED TOOLS: Number of positions: 6 Rotation range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct drive) Minimum programmable value: 0.001° Max. rapid traverse: 80 rpm AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Tank capacity: 200 Lt Pump flow rate: 100 Lt/min DIMENSIONS: Overall dimensions with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine complete with: • Drilling kit with tailstock on B-axis for simultaneous drilling and turning • 9 bar pump • Chip removal paddle L 150 mm • Monitoring system • Spindle bore 71 mm • Simple collet chuck, Morse taper 42 • Chuck diameter 165 mm • Instruction manuals and CE declaration

Condition: good (used), functionality: fully functional, Year of construction: 1997, Well-maintained, used press brake by Jorns Type: Maxi Line 150 SM CNC400A 6 Capacity: 6000 x 1.5 mm Jorns CNC 400A control system Gedpjz Ru Awsfx Ap Dekc

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Equipment: Alcolor Automatic film dampening Autoplate: semi-automatic plate change system All manuals, tools, accessories Gkedpfxjzzzt So Ap Djc Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, wire diameter (max.): 22 mm, type of input current: three-phase, overall weight: 3,000 kg, total width: 2,000 mm, total length: 10,000 mm, total height: 2,300 mm, empty load weight: 3,000 kg, A fully functional, Chinese-made machine for manufacturing pocket springs is for sale. Suitable for mattresses and furniture. Type: SM-B100. Year of manufacture: 2019. Spare parts are readily available, and 24/7 factory support is provided. The machine is located in Hungary, in Budapest. All parts and accessories are included. It has been in perfect working order for 7 years. In addition to this machine, a machine for arranging the pocket springs is required for the complete technological process, which connects the rows of springs. It produces 100 springs per minute and can manufacture springs with lengths ranging from 9 cm to 18 cm. This machine manufactures the springs and packages them in PP bags. The wire collector and the final conveyor belt are also included. It is ready for immediate use. It can be tested in Budapest while in operation. The total weight of the machine is 3000 kg. We will load it onto a truck using a large forklift. An invoice will be issued. If you purchase the machine, we will disassemble it free of charge for transport. Gsdpfsznwwtsx Ap Dokc

Condition: excellent (used), Year of construction: 2014, operating hours: 8,884 h, functionality: fully functional, mileage: 68,462 km, power: 397.17 kW (540.00 HP), first registration: 03/2014, overall weight: 32,000 kg, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, trailer coupling, truck registration, Very well-maintained, fully functional wood chipper. Man TGS 35.540 8x4 with Adblue, Chippo 5010 dT, rotating model. 4272 rotor operating hours. Gjdpfxjz E S Swo Ap Dekc