Used Cloos Roboter Industrial Robot for sale (27,072)

Condition: not inspected (used), Manufacturer: Cloos Tip: Romat 56 The device has not been tested and its condition is unknown. Sold with the accessories shown. Redpfxjvxqy Tj Adrot

Condition: not inspected (used), Manufacturer: Cloos Redpfx Adsvxqzqorst Type: Romat 76 S The device has not been tested and its condition is unknown. Sold with the accessories shown.

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Rsdpewgd Hzefx Adrjt Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB Rjdjrmulvepfx Adrst 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: used, Year of construction: 2023, 2023 Cloos Robot Welding Cell With QRC-300 Robot & Qineo Next 452 Premium MIG/MAG Welding Source - With Leuze Electronic MLS Safety Light Curtains, Welding Torch Cleaner & Pendant Controls. Dual Rotary Transfer Table dimension 650 x 450mm. Cloos QRC-300 Robot- Swivelling Range Axis 1 -170 ° / +170 °, Axis 2 -90 ° / +125 °, Axis 3 -220 ° / +70 °, Axis 4 -170 ° / +170 °, Axis 5 -135 ° / -135 °, Axis 6 -300 ° / +300 °, Swivelling Speed Axis 1 200 °/sec, Axis 2 200 °/sec. Axis 3 230 °/sec, Axis 4 490 °/sec, Axis 5 540 °/sec, Axis 6 520 °/sec. Working Area Ø3,000mm. Range 2,000mm. Pay Load 8kg. Repeatability +/-0.1mm. Floor Space 400 x 400mm. Weight 110kg. S/No. 0881590000-20040 (2023). Qineo Next 452 Premium- Welding Current 25A/15V-450A/36.5V. Welding Current At 60% Duty Cycle* 450A/36.5V. Welding Current At 100% Duty Cycle* 350A/31.5V. Open Circuit Voltage 80V. Mains Voltage 380V-480V/3 Phases. Connection Cable 4 x 6mm2. Mains Fuse Slow-Acting 32 A. Type Of Protection IP. Insulation Class F. Type Of Cooling F. Dimensions L720 x W340 x H500mm. Weight Of Power Unit 63kg. Weight Of Cooling Module 28kg. S/No. Qinx 1963 (2023). Wire Drive Units QINEO NexT-Wire Feed 30m/min, Wire Ø0.8-2mm. Overall Dimensions W350 x D270 x H230mm. Weight 10.2kg. Rjdpfxjyx Hzxs Adrst

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1302981, overall weight: 280 kg, controller model: KR C4 NA UL, TECHNICAL DETAILS Control Control model: KR C4 NA UL Control serial number: N 3.056.661 Gripper Design: Vacuum gripper Drive: Single zone MACHINE DETAILS Total weight: 280 kg Operating hours: approx. 500 h EQUIPMENT Teach Pendant (manual control) available and functional Rsdpfsy Hizdox Adrjt Safety enclosure with Siemens PLC Sick laser scanner, 2 units Light curtains, 4 units

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: R201204B9, overall weight: 252 kg, Equipment: safety light barrier, TECHNICAL DETAILS Redpfxoy Hiy To Adret Control Control model: A05B-2611-B382 Control serial number: E20110087 Gripper Design: Vacuum gripper Drive: Single zone MACHINE DETAILS Total weight: 252 kg Operating hours: approx. 1,000 h EQUIPMENT Safety enclosure with Allen Bradley PLC Sick laser scanners, 2 units Light barriers, 4 units

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20225202986, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Equipment: documentation/manual, TECHNICAL DETAILS Load capacity: 12.5 kg Arm reach: 1,300 mm Swivel range: 360° MACHINE DETAILS Control cabinet width: 500 mm Control cabinet height: 500 mm Redpfx Adoy D I Ikorst Input voltage: 240 V Input current: 8 A Type of input current: Alternating current (AC) Total weight: 50 kg EQUIPMENT Manual Controller Teach pendant Original packaging and documentation

Condition: like new (used), Year of construction: 2017, The KUKA KR 3 R540 is part of the KR AGILUS series, specifically engineered for high-speed precision in extremely tight workspaces. It is a favorite in the electronics industry for tasks like assembly, pick-and-place, and screw fastening due to its compact 600 x 600 mm cell compatibility. Core Specifications Maximum Payload: 3 kg Maximum Reach: 541 mm Number of Axes: 6 Pose Repeatability: ±0.02 mm Weight: approx. 26.5 kg Mounting Positions: Floor, Ceiling, or Wall Rsdpoy Hhqqefx Adrot

Condition: used, Year of construction: 2017, ABB further extends its mid range robot family. The IRB 2600 is the second model in the sharp generation range with enhanced and new capabilities. It is a compact robot with a high payload capacity. The design has been optimized for targeted applications like arc welding, material handling and machine tending. The IRB 2600 is available in three variants, with options for floor, wall, shelf, tilted or inverted mounting configurations. IRB 2600-20/1.65 Redey Echbopfx Adrot Reach (m): 1.65 Payload (kg): 20

Condition: used, Year of construction: 2015, The ABB IRB 5400 is a highly specialized industrial robot series designed specifically for high-precision paint processes. 1. Core Design and "Hollow Wrist" Technology The hallmark of the IRB 5400 is its Hollow Wrist (HW). Unlike standard robots where hoses are strapped to the outside of the arm, the IRB 5400 routes all paint and air hoses through the center of the wrist. Benefit: This eliminates "hose whip," prevents the hoses from snagging on parts, and significantly reduces the risk of paint contamination caused by debris falling from external cables. Precision: It allows for a very compact and clean workspace, enabling the robot to reach into tight interior spaces like car cabins or engine bays. 2. Integrated Process Solution (IPS) The 2015-era IRB 5400 units typically utilize ABB’s Integrated Process System (IPS). This technology synchronizes the robot’s motion with the paint dosing and air regulation. Rsdpfxoy Alrdo Adrot Paint Savings: IPS provides ultra-fast response times for starting and stopping the paint flow, which minimizes overspray and reduces material waste. Uniformity: It ensures a consistent film thickness, even as the robot changes speed around complex curves.

Condition: used, Year of construction: 2019, Staubli TX60 with working station. Used for 3D printing. The TX60 is designed for high-speed, small-payload applications where floor space is at a premium.Payload (Nominal): 3.5 kgPayload (Maximum): 9 kgReach: 670 mmRepeatability: $\pm 0.02$ mmWeight: Approximately 51 kgMounting Options: Floor, Wall, or Ceiling. Rsdpfxey Af E Dj Adrst

Condition: used, Year of construction: 2014, Fanuc M-710iC/50 with R-30iB The Fanuc M-710iC/50 is a medium-payload, multi-purpose industrial robot designed for high-speed performance and versatility. When paired with the R-30iB controller, it provides a robust solution for applications ranging from material handling to machine tending and polishing. Specification,Details Controlled Axes,6 Max Reach,2050 mm Max Payload,50 kg Weight (Arm),Approx. 560 kg Motion Range (J1),360° Max Speed (J1),175°/s Common Applications Material Removal: Grinding, deburring, and polishing. Machine Tending: Loading and unloading CNC machines or injection molding presses. Palletizing: Handling boxes or bags within its 50 kg weight limit. Rjdeyz Rfaspfx Adrst Assembly: Precise part placement in automotive or general manufacturing lines.

Condition: refurbished (used), Year of construction: 2018, The Stäubli TX90L is a high-performance, 6-axis industrial robot known for its exceptional precision, rigid structure, and versatility in demanding environments. As the "Long" version of the TX90 series, it extends the reach while maintaining the slim, enclosed design characteristic of Stäubli robots. Rsdpfx Adsyz H Idsrot The TX90L is designed to balance a medium payload with an extended work envelope. Reach: 1200 mm (compared to 1000 mm on the standard TX90). Payload: Nominal 6 kg (Maximum capacity up to 15 kg depending on the center of gravity). Repeatability: ± 0.035 mm (One of the highest precision ratings in its class). Degree of Freedom: 6 Axes. Weight: Approximately 114 kg. Mounting: Floor, Wall, or Ceiling (highly flexible for tight spaces).

Condition: excellent (used), Year of construction: 2017, FANUC LR Mate 200iD Payload 7 kg Reach 717 mm Axes Redpfx Adoyzlzcorst 6 The FANUC LR Mate 200iD is a compact 6 axis robot with the approximate size and reach of a human arm. It combines best-in-class robot weight-load capacity with standard IP67 protection and outstanding FANUC quality. This makes the LR Mate 200iD the best and most reliable mini robot for process automation in many industries.

Condition: used, Year of construction: 2020, FANUC Redpfxsyzdgqo Adrst M-10iD/12 Payload 12 kg Reach 1441 mm Axes 6 Fast and compact palletizing With its slim design and small footprint, this model saves precious floor space and is ideally suited to compact cells. And thanks to its speed and 5th axis, it makes a great choice on robotic palletizing applications requiring high rates of throughput and maximum reliability.

Condition: like new (used), Year of construction: 2023, the AUBO i10 sports a 10kg payload capacity and is built to serve in wide workspace for medium-duty applications. With a reach of 1350mm the i10 is able to safely work from a distance without sacrificing payload capacity, performance, or precision Rjdpfx Adsyy N Ecsrjt

Condition: used, Year of construction: 2021, JAKA Zu5 Rsdpfxsyy Nzko Adrot Payload: 5 kg, Weight: 23 kg, Reach: 954 mm Integrated joint, easy to assemble and disassemble. Quick deployment, saving man-hours, improving production efficiency Implementing the concept of "human-robot-environment collaboration". Perfect for welding with regards to Payload and Reach.

Condition: used, Year of construction: 2021, JAKA Zu12 Rjdpfx Ajyy Ny Hedrst Payload: 12 kg, Weight: 41 kg, Reach: 1327 mm Human-robot-environment collaborative integration Payload 12 kg, Self-weight 41 kg, Reach 1327 mm Integrated joint design, easy to assemble and disassemble Higher payload and longer arm span, competent for heavy manual labor tasks Adhering to the concept of ""human-robot-environment collaborative integration"", high safety design eliminates the need for isolation fenc

Condition: refurbished (used), Year of construction: 2020, HIGH-SPEED, HIGH-PERFORMANCE ROBOT The R series robots are setting the benchmark for all small to medium duty industrial robots. The compact design, along with industry leading speed, reach and work range make the R series robots ideal for a wide range of applications throughout a multitude of diverse industries. Payload 13 Kg Rsdpfxjyy Nv Ie Adrst Max. Reach 1460 mm Robot Category Small-to-medium robots up to 80kg payload Mounting Ceiling, Floor Robot Series RS series

Condition: used, Year of construction: 2019, ## Universal Robots UR5 with CB3.1 Controller The CB3.1 (Control Box 3.1) is a robust and widely utilized control platform known for its stability and user-friendly interface. Paired with a 2019–2020 UR5 arm, this configuration offers a highly reliable automation solution that balances modern safety standards with simplified industrial integration. ### Hardware Overview * Teaching Pendant: 12-inch wide-screen resistive touch pendant with a user-friendly GUI (PolyScope). * Digital I/O: 16 Digital Inputs and 16 Digital Outputs. * Analog I/O: 2 Analog Inputs and 2 Analog Outputs. * Communication: Modbus TCP, PROFINET, Ethernet/IP, and TCP/IP. * Power Source: 100-240 VAC, 50-60 Hz. --- ### Key Technical Benefits * Enhanced Safety Logic: The 3.1 revision features improved safety-rated I/O and dual-channel safety circuitry, allowing for Category 3, PLd safety configurations without complex external hardware. * Proven Stability: As the final and most refined iteration of the CB3 series, the 3.1 controller is optimized for high uptime and is compatible with a massive library of legacy UR+ grippers and sensors. * Programming Versatility: Supports both Graphical Programming (Polyscope) for beginners and URScript for advanced users who require complex logic and external peripheral control. * Small Footprint: The compact cabinet design allows it to be tucked under workstations or mounted in tight spaces, mirroring the agility of the UR5 arm itself. --- ### Connectivity & Expansion The CB3.1 controller acts as the central hub for your entire work cell: * Tool I/O: Provides 12V/24V power and I/O directly at the tool flange, minimizing the need for external cables along the arm. * Remote Control: Can be easily integrated into a Master PLC system via standard industrial Ethernet protocols. * Quick Setup: Features a "Teach" button on the back of the pendant for easy manual guidance of the robot arm. --- ### Technical Summary Table Rjdpoyy Itfjfx Adrjt | Feature | Specification | | :--- | :--- | | Safety Functions | 15 Configurable Safety Functions | | I/O Ports | 16 DI, 16 DO, 2 AI, 2 AO | | IP Rating | IP20 (Controller) / IP54 (Robot Arm) | | Ambient Temp | 0°C to 50°C | | Software | PolyScope (CB3 Edition) |

Condition: like new (used), Year of construction: 2020, load capacity: 16 kg, arm reach: 1,550 mm, ROBOTIC ARM BRAND: ABB MODEL: IRB 2400/16 TECHNICAL DESCRIPTION PAYLOAD: 16 KG MAX. REACH: 1550 MM YEAR OF MANUFACTURE: 2020 CONTROL: IRC 5 Single (2020) SOFTWARE: 6.15.07.00 Rodpfsy H H S Hox Adrst

Condition: like new (used), load capacity: 205 kg, arm reach: 2,800 mm, ROBOTIC ARM Rodpfoy H H R Nox Adret BRAND: ABB MODEL: IRB 6640-205/2.75 TECHNICAL DESCRIPTION PAYLOAD: 205 KG MAX. REACH: 2800 MM CONTROL SYSTEM: IRC 5

Condition: like new (used), load capacity: 500 kg, arm reach: 2,826 mm, ROBOTIC ARM BRAND: KUKA Rodpjy H H Nrefx Adrot MODEL: KR500-2 KRC2 ED05 TECHNICAL DESCRIPTION PAYLOAD: 500 KG MAX. REACH: 2826 MM CONTROL UNIT: KRC2 ED05

Condition: like new (used), Year of construction: 2014, load capacity: 6 kg, arm reach: 1,450 mm, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 Rodpfx Aoy H H I Iodrjt TECHNICAL SPECIFICATIONS PAYLOAD: 6 KG MAX. REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROL: IRC 5