Used Desoutter Cvic Ii L4 for sale (3,103)

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Pjdpfx Asvxux Heirogu Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Pgjdovtf Aropfx Airju Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2018, condition: used, functionality: fully functional, Desoutter ECSF4 + CVIC II-H2 – 12 Complete Screwdriving Systems For sale: 12 complete Desoutter industrial electric screwdriving systems, consisting of CVIC II-H2 controllers and ECSF4 electric screwdrivers. The equipment comes from a single industrial installation. All units have been kept as complete controller + screwdriver pairs. Scope of supply: 12 × Desoutter CVIC II-H2 controllers 12 × Desoutter ECSF4 electric screwdrivers 6 × screwdrivers in a straight configuration 6 × screwdrivers with additional/special head attachments 12 × additional screwdriver attachments Original connection cables Additional mounting parts and accessories as shown in the photos Technical information: Manufacturer: Desoutter Industrial Tools Controller: CVIC II-H2 Screwdriver: ECSF4 Maximum torque: 4 Nm Programmable tightening parameters Torque and angle control Integrated cycle counter Designed for professional assembly stations and automated production applications Condition & Cycle Count All units have been powered on and tested. Pgedpfjzw U Rpex Aireu The systems have similar usage, with approximately 2.3 million tightening cycles per system. Cycle counts have been checked directly in both the controller and screwdriver memory. Example from one system: Controller: 2,319,594 cycles Screwdriver: 2,319,700 cycles The very similar controller and screwdriver cycle counts indicate that the units have been operated together as matched systems. Exact cycle counts for individual units can be provided upon request. The equipment is in good used industrial condition, with normal signs of use. Please refer to the photos for the exact condition and included accessories. Sale of the complete lot of 12 systems is preferred, but smaller quantities may also be available upon request. European and international shipping can be arranged. Additional photos, serial numbers, individual cycle counts and videos showing the equipment in operation are available upon request.

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate Pgodpfx Aewxv Hkjireu – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Max.: 4.0 Nm Podjvxu Dvepfx Airjgu Idle speed: 2000 rpm Weight: 0.6kg

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Podpfx Aijvtf R Aorogu Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 8298-5 + 1357075, Offer 20142 Technical data: Psdpjpahn Hofx Airogu - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 2,938 mm, total height: 1,622 mm, total width: 888 mm, compressed air connection: 8 bar, air demand: 100 m³/h, roll width: 480 mm, air pressure: 6 bar, film width: 480 mm, product height (max.): 120 mm, We offer this Italian Pack ITALIAN PACK Perseus VAC II packaging machine in very good condition, manufactured in 2019. Parameter Typical value for Perseus VAC Machine dimensions approx. 2938 × 888 × 1622 mm Psdpfx Ajz Eci Heirjgu Max. tray height 120 mm Film roll width max. 480 mm Roll diameter approx. 250 mm Required compressed air 6–8 bar Vacuum pump standard approx. 100 m³/h Performance approx. 5–15 cycles/min, depending on the process Length of the infeed zone approx. 1648 mm The machine has two tools and two GN 1/2 and GN 1/4 molds. If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2016, operating hours: 15 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6151654220, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS12-600P without battery Pgedpjv Iphujfx Airsu with speed adjustment (via optional module) Idle speed: 250 to 570 min-1 Torque range: 3.0 to 12 Nm / 26.5 - 106 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Pgodpev Ipcljfx Airou Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P without battery with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Pjdpfx Aisv Imyujrjgu Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Pgsdpfjv Ipt Rjx Airju Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Length: 301 mm Weight without battery: 1.25 kg Other tools for industrial production and maintenance on request.

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 33,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, bar passage: 81 mm, controller manufacturer: Siemens, controller model: 828D, number of tool stations in tool turret 1: 24, number of driven tool stations in tool turret 1: 12, CNC turning machine with counter-spindle, driven tools, and Y-axis. • Max. turning diameter over bed: 780 mm • Max. turning diameter over slide: 630 mm • Max. turning length: 760 mm • Torque of the main spindle: 719 Nm • Spindle mounting (main spindle): a2 #8 • Speed of the counter-spindle: 6000 rpm Podpfs Ad U Uxjx Airsgu • Power of the counter-spindle (30 min): 18.2 kW • Torque of the counter-spindle: 220 Nm • Spindle mounting (sub-spindle): a2 #5 • Number of stations: 24 (12 driven) Additional equipment: • Renishaw Equator • Rotary turret magazine • Gantry robot • Gantry loader (Mekiload) The machine can be inspected while powered on.

Year of construction: 2011, operating hours: 7 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659360, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLB012-A2000-S4Q-NE shut-off with push start Idle speed: 1000 / 750 min-1 Torque range: 0.20 to 1.18 Nm / 1.76 to 10.4 in.lb Output: 1/4" Length: 245 mm Psdov Ipx Hjpfx Airsgu Weight without battery: 0.83 kg Other tools for industrial production and maintenance on request.

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 Pgedsv Ipnzepfx Aireu -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Benefits Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Other tools for industrial manufacturing and maintenance on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Pgodpfx Aisziviwsrou

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis Pgedpfjzlcyuox Airsu - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Pedpfev Inwzox Airsgu Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Condition: used, Year of construction: 2007, functionality: limited functionality, machine/vehicle number: GC 968003, grinding length: 1,015 mm, grinding width: 405 mm, total height: 2,080 mm, total length: 4,280 mm, total width: 1,730 mm, overall weight: 3,500 kg, SURFACE GRINDER CHEVALIER FSG-1640 ADII Table size: 400 x 1000 mm Max. grinding length: 1015 mm Max. grinding width: 405 mm Max. distance from table surface to spindle: 620 mm Magnetic chuck: 400 x 1000 mm Longitudinal travel of the table Hydraulic stroke: 1050 mm Max. stroke (manual): 1100 mm Pjdpfxoz Syqcs Airjgu Speed: 5 – 25 m/min Speed: 2.9 m/min Automatic travel: 405 mm Transverse travel: 460 mm Spindle drive speed: 1450 rpm Spindle drive power: 5 HP / 4-pole Spindle drive diameter: 355 mm Grinding wheel width: 50 mm Grinding wheel inner diameter: 127 mm Machine dimensions (L x W x H): 4280 x 1730 x 2080 mm Machine weight: 3500 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SEICOS Σ10M / A10M, table load: 750 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table length: approx. 1,120 mm Table width: approx. 485 mm Table load capacity: max. approx. 750 kg Pjdj Afwvlopfx Airsgu Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Number of tool positions: 30 MACHINE DETAILS Control system: SEICOS Σ10M / A10M Machine weight: approx. 6,500 kg

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Pgsdpsz I Du Aofx Aireu Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate.

Condition: used, machine/vehicle number: GB897004, Max. grinding wheel diameter: approx. 250 mm, max. grinding length: 800 mm, with magnetic clamping plate, dimensions: 800 x 400 mm, coolant system, fleece filter system. Psdpfs Af Nicox Airegu

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Pjdjz Rmn Eopfx Airogu Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 922006, electrical fuse: 16 A, input voltage: 400 V, power: 1.1 kW (1.50 HP), Imperator II – Multi-chamber divider GB 100-600G / 400-2,900 G Continuously adjustable, 150-2,900g (depending on dough consistency) Machine belt, belt width 280mm Psdpfozibdysx Airegu Discharge height 810mm Thanks to the hydraulic spring and the multi-measuring chamber, the IMPERATOR CT II offers the optimal combination of dough handling and weight accuracy. Removable components such as the discharge belt, measuring piston, and flour spreader simplify cleaning. We have used the machine for breads of 500 grams and 1,000 grams (dry weight). The machine can be tested on site. Sale ex works (EXW): DE 75015 Bretten (near Karlsruhe)

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Psdps Aa Irpjfx Airogu Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.