Used Eps for sale (526)

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Crsdpeu U Ad Rofx Aptsg EPS bead storage 300 m3

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Credpfx Aezyyfkoptog Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: excellent (used), Year of construction: 2019, EPS 1050 UV TUNNEL: Maximum sheet size: 1050x780 Maximum stack height: 800 Maximum conveyor speed: 45 m/min. Operating pressure: 6 bar Air consumption: 4 m3/h Cjdpfozxrdisx Aptsrg Maximum power consumption: 20 kW Operating power: 7.5 kW Weight: 950 kg Dimensions: 4250x1700x1100

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Cjdpfxjyw Tmlj Aptjrg Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Cedpfx Aozy Hhloptorg

Condition: used, mileage: 4,60,000 km, power: 290 kW (394.29 HP), first registration: 10/2000, overall weight: 26,000 kg, Equipment: ABS, air conditioning, Actros 2640 !!!! GERMAN VEHICLE IN TOP CONDITION !!!!! First registered: 10/2000 Crodpfozyfl Nsx Aptsg 460,000 km 6x4 Leaf/air suspension EPS with clutch - 3 pedals Trailer coupling Meiller tipper body !!!! ONBOARD COMPUTER !!!!! ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran deutsch/english/p?????/?????..... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 €. Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 4,60,000 km, power: 290 kW (394.29 HP), first registration: 10/2000, overall weight: 26,000 kg, Equipment: ABS, air conditioning, Actros 2640 !!!! GERMAN VEHICLE IN TOP CONDITION !!!!! First registered: 10/2000 460,000 km Crjdezyfmtspfx Aptog 6x4 Leaf/air suspension EPS with clutch - 3 pedals Trailer coupling Meiller tipper body !!!! ONBOARD COMPUTER !!!!! ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran deutsch/english/p?????/?????..... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 €. Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 1,020 mm, total width: 740 mm, ESC ATMACE 710/G: Max print format: 720x1020 Max substrate format: 740x1020 Min. substrate format: 330x480 Max size of the screen printing frame: 1140x1280 Squeegee angle adjustment range: 30 degrees Fit adjustment range: /-10 Crsdewnbbxspfx Aptog Manual feed - ¾ auto Max speed - depends on the substrate: 500 sheets/h Power consumption: approx. 3.9 kW Dimensions: length/width/height 2700x2500x1500 year of manufacture 2012 UV TUNNEL EPS SUV 800: Max sheet format: 1050x780 Max stack height: 860 Max conveyor speed: 45m/min. Max power consumption: 14.3 kW Weight: 550 kg Dimensions: length/width/height 4300x1680x1380 year of manufacture 2012 The set additionally: - Station for washing sieves, - grinder for sharpeni...

Condition: used, mileage: 7,30,000 km, power: 335 kW (455.47 HP), first registration: 08/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, emission class: euro5, Equipment: ABS, air conditioning, Mercedes Actros 2646 First registration: km Suspension: Air/Air EPS 3 Pedal Retarder Air conditioning Wheelbase 4500 Only chassis - €3000 Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?/?… Roman Crjdpfx Apjzyxpzoteg We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE Cjdezyyynspfx Aptorg The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Csdjvyp H Uopfx Aptorg Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. Crsdsua Dqiopfx Aptjg We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: used, functionality: fully functional, mileage: 2,84,891 km, power: 320 kW (435.08 HP), first registration: 11/1987, fuel type: diesel, empty load weight: 10,960 kg, maximum load weight: 10,750 kg, overall weight: 21,710 kg, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 300 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, total length: 8,550 mm, total width: 2,470 mm, total height: 3,400 mm, loading space volume: 16 m³, loading space length: 5,700 mm, Year of construction: 1987, Equipment: ABS, additional headlights, compressor, differential lock, fog lights, power assisted steering, retarder, seat heater, soot filter, trailer coupling, Model: MERCEDES BENZ SK 2244 V8 EPS 6x2/6x4 Robson Pump 2xTank 10 cubic foam tank First registration: 03/11/1987 Mileage: 284,891 km (original) Engine power: 320 kW (435 HP) Water tank capacity: 9.00 m³ Foam tank capacity: 1.00 m³ Water cannon Equipped with ROBSON Drive, switchable to 6x4 drive EPS 3 pedals Auxiliary heater Antennas Radio/Cassette/CD/MP3 Air conditioning Adjustable exterior mirrors Sun visor Work lights Fog lights High beam Hazard warning lights Tow hitch Transmission: Manual gearbox Tank: Diesel (300 liters) Drive configuration: 6x2/6x4 Robson Drive Differential lock Wheelbase between axles 1 and 2: 4,500 mm Wheelbase between axles 2 and 3: 1,350 mm Tire size axle 1 (front): 315/80R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Leaf suspension front/rear Wheel arch covers Curb weight: 10,960 kg Payload: 10,750 kg Permissible total weight: 21,710 kg Vehicle overall dimensions (L x H x W): 855 cm x 340 cm x 247 cm Superstructure dimensions (cargo length): 5.70 m With new TÜV and AU upon agreement, extra charge applies! You can also contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net!!! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs plates production if required. Viewing and test drive possible at any time, including weekends, by prior phone arrangement! Cjdpfx Aoztfndoptsrg Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: excellent (used), mileage: 7,695 km, power: 331 kW (450.03 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Rear view camera - Sunshade flap - Stability control - Toolbox - Power take-off (PTO) - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 24,830 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Condition Technical condition: very good Visual condition: very good VOLVO FM 450 8X4 TRIDEM WITH OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED EURO 6 L PACKAGE 450 HP 8X4 TRIDEM DRIVELINE, LAST AXLE LIFTED AND STEERABLE AIR SUSPENSION WHEELBASE 520 CM I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE FM CAB WITH AIR CONDITIONING, NAVIGATION, XENON, CAMERA 3 SEATS IN CABIN TRAILER COUPLING MULTIPLE TOOLBOXES ONLY 7,695 KM!!! OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED Polystyrene volume: 22 m3 Binder volume: 13 m3 Dosing mixer: 400 l Pumping mixer: 800 l Height: 440 cm Water tank: 1,000 l Production of lightweight subfloors with polystyrene: up to 15 m3/h Production of foam concrete: up to 25 m3/h Drive: Vehicle PTO CE Crjdpexn Sr Sofx Apteg Removable BDF system FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, mileage: 3,20,000 km, power: 300 kW (407.89 HP), first registration: 03/2007, overall weight: 18,000 kg, fuel type: diesel, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, crane, Actros 1841 First registration: km EPS – 3-pedal system Air conditioning Leaf/Leaf – full steel suspension Euro 5 Meiller tipper body Wheelbase: 3900 !!!! 15-ton hydraulic winch !!!!! The winch is mounted on the front plate. Complete municipal hydraulic system with front plate. Crane: Hiab 122 Year of manufacture: 2007 !!! Radio control !!!! 3x hydraulic extension/3x telescopic boom Grab control/oil lines on the front/5+6 control circuits Hook height approx. 13m ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …? … Roman We will gladly take care of your financing or leasing. Credpfjzwbkpsx Aptjg EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Airport transfer Munich or Passau train station

Condition: used, Year of construction: 2008, Automatic vertical precision panel saw, Csdpfjzy Ik Usx Aptorg - Self-supporting, welded, torsion-resistant frame construction, with hardened guides. - Support rollers with ball bearings, with automatic locking, number: 17 - Automatic movable WOOD workpiece support throughout the cutting area. - Support for small workpieces integrated into the frame. - Closed dust extraction system TRK integrated into the frame. - Divided center support for optimal working height, length: 5.15 m - Saw beam with automatic locking for vertical sawing. - Fine adjustment of the saw motor using a push button. - Automatic locking of the saw motor during horizontal sawing. - Automatic lowering of motor/saw blade. - Automatic pivoting of motor/saw blade. - Back cut: 15 mm - Infinitely adjustable automatic feed rate from: 10 - 25 m/min - SPS control with display, diagnostic system, check control and hour meter. - Powerful, vibration-free motor with motor brake: 7.5 hp - Supersilent system for noise reduction. - Digital measuring system (DMS) for horizontal and vertical sawing. - Switch for support rollers or center support. Quick and easy adjustment of reference dimensions. Switch for strip cutting. - Adjustable measuring accuracy: 1.0/0.5/0.1 mm - Auxiliary fence on profile rail with measuring tape, number: 3 - SPS control with display, diagnostic system, check control and hour meter. - Must be connected to an external dust extraction system and compressed air. Striebig ”CONTROL 6224”, continued… - Incl. mounting kit for wall mounting. - Cutting area: Length: 5300 mm - Height: 2240/2100 mm - Depth: 80 mm Incl. the following optional equipment delivered with the machine: - Scoring unit “VSA” with infinitely adjustable cutting width and automatic on/off function, incl. scoring blade. - Electronic positioning system "EPS", in the horizontal axis. (out of order, needs repair) Available from the beginning of November 2026.

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Processable cables Credpfx Apoxcuqajtjg Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 6800 mm Working area Y: 1840 mm 19.2 kW electrospindle with C-axis, 360-degree interpolating torque Number of vertical drilling heads: 30 Number of horizontal drilling heads X: 6 Number of horizontal drilling heads Y: 4 Blade for grooving in the X direction 8-position turret tool changer 22-position chain tool changer Work table with 10 rows, EPS automatic clamping system Numerical control: BH660 Programming software: BiesseWorks advanced 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Crsdpfxjzy Hnro Aptog Protective screens Approximate weight: 7050 kg

Condition: used, mileage: 5,60,000 km, power: 440 kW (598.23 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, emission class: euro5, Equipment: ABS, air conditioning, crane, Actros 2860 !!!! INTERCHANGEABLE SYSTEM - SEMI-TRAILER and PLATFORM BODY Registration: km V8 engine 6x4 Retarder EPS with clutch Air conditioning Fassi crane F235 Year of manufacture: 2008 4x telescopic extension Remote control Engine completely overhauled 2 years ago Crjdpfx Aozihahsptog Visit our website: ----Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer to Munich Airport or Passau train station

Condition: good (used), mileage: 1,05,756 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, wheelbase: 5,650 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, = Additional options and accessories = - PTO (Power Take-Off) Csdpfx Ajxzq Hhsptjrg = Further information = Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 20,300 kg Payload: 16,700 kg Gross vehicle weight: 37,000 kg Technical condition: good Visual condition: good

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 276 kg, load capacity: 22 kg, arm reach: 1,612 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 22 R1610-2 with KR C4 – NEW / 0 operating hours Credpfx Apszyyzlotog We offer a new and unused KUKA KR 22 R1610-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2022 with 0 operating hours. Robot specifications - Model: KUKA KR 22 R1610-2 - Payload: 22 kg - Reach: 1612 mm - Year of manufacture: 10/2022 - Operating hours: 0 h / NEW - Weight: 276 kg - Cable set: INT 076ST1610 - Configuration: ES13 116 CTR PNT EPS AIR VAC GND - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.3 - Servo configuration SC5.1 - 400 V transformerless power supply - Parallel Safety interface X11 - Ethernet interface XF277 - CSP 2x USB 3.0 / 1x RJ45 KLI - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PLC ProConOS4-1 4.1 - KUKA.DiagnoseSafety 2.1 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Cjdpfxey U Naio Aptjrg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Cedjy Tk R Hepfx Aptsrg Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm Csdozlz Svepfx Aptsrg • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 22,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, mileage: 23,28,985 km, power: 427 kW (580.56 HP), first registration: 09/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro3, suspension: steel-air, Year of construction: 2006, Equipment: EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), power mirror, retarder, spoiler, = Additional options and accessories = - Aluminum fuel tank - Roof spoiler - EPS (Electronic Power Steering) - Side door = Additional information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,500 kg Payload: 10,500 kg GVW: 18,000 kg Overall condition: poor Technical condition: moderate Optical condition: moderate Reference number: 89 Vehicle number: 89 Mercedes-Benz Actros 1858 V8 / Megaspace / Retarder / Euro 3 .: WDB9340321L007555 Transmission: Semi-automatic Suspension: Leaf / Air Air conditioning Retarder Engine brake Cruise control Cjdezyz Akopfx Aptsrg Euro 3 No liability for printing and typographical errors, changes, prior sale and errors. = Company information = No liability for printing and typographical errors, changes, prior sale and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.