Used Durma Cnc Vertical Cutting Hydraulic for sale (38,401)

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, DURMA CNC vertical cutting hydraulic shear model VS 4020 of 4080 x 20mm, with CNC Cybelec mod 60, motorized stop, installed power 45Kw, in a pre-owned condition, year 2009, 29 tns Isdpfxenpxqaj Ak Aoif

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front Iodpfx Aovaatlok Aoif 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Capacity : 3050 mm. x 160 ton Iijdpezuvxpsfx Ak Asf Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Condition: new, sheet length: 4065sheet thickness: 10,0total power requirements: 22weight approx.: 14900messurements (LxWxH): 4860x3170x2430 Iodshp Dkbjpfx Ak Aoif

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Iijdpfezi Awhex Ak Aef Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 Iijdpozdfhaefx Ak Ajf F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Iodpfx Akjwfdm Es Asif variable machine table.

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Isdpfjzucbqjx Ak Aeif Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press Ijdpfx Aksyzr Nmj Aeif • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Isdpfx Ajzt A H Rok Ajif Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Iijdpfx Aex R U Epek Asf Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: excellent (used), Year of construction: 2008, operating hours: 12,000 h, functionality: fully functional, Key data: Manufacturer: HANKOOK Machine Tools Model: VTC 85R Year of manufacture: 2008 Control system: FANUC Series 21i-TB CNC vertical turning center Full C-axis Powered tools Accessories included in the machine price: Hydraulic chuck, Ø 600 mm Faceplate, Ø 1,000 mm Set of jaws Iijdpfezuzdkex Ak Ajf 4 chucks Clamps Holders for powered tools Thanks to the C-axis and powered tools, the machine is also suitable for combined machining, drilling, and milling operations without the need to transfer the workpiece to another machine. Extensive clamping and tooling accessories are included in the offer. Operational status: Only approximately 12,000 operating hours The machine was mainly operated in a single-shift operation It was not fully utilized for production The machine is connected and can be demonstrated in operation.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Iiedpfx Akszuzime Asf Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Iiedpfxszu T Smj Ak Ajf Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: CE marking, documentation/manual, Capacity: 4050 mm x 175 Ton Distance between frames: 3600 mm Stroke: 265 mm Control: DURMA DT15 (3D Touch Screen) Serial No.: 73362219436 Dimensions: 5200 x 1900 mm Height: 2930 mm Weight: 12,750 kg Ijdpfx Asyrdgqok Aoif

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Iedeyhd Rbspfx Ak Asif Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas control unit Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate ä22726

Condition: new, sheet length: 3280sheet thickness: 10,0total power requirements: 11weight approx.: 8,65messurements (LxWxH): 3800x2050x2150Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. CNC slotted table shears KKI Thanks to durable and durable mechanics and hydraulics, precise backgauge with Ball screw and user-friendly CNC control are KKI guillotine shears highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and Cutting lengths of 3 to 6 m in length are part of our standard portfolio. Of course are on customer request also higher sheet thicknesses and cutting lengths possible. The guillotine shears owe their long life to their particularly robust construction with fully welded frame. The entire machine body, the cutting beam and the Backgauge are insensitive twisting and deformation and thus enable highest cut quality. By entering the sheet thickness and material type, the CNC control calculates Fully automatically the required cutting angle and kerf. Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. Technological advantages     Fast and precise cuts     Stable, durable frame construction     Automatic kerf adjustment and angle adjustment     Easy handling     Low maintenance costs     High safety standard     Use of components from well-known manufacturers     Low unit costs Technical specifications: Sheet thickness: 10 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 1.8 ° Backgauge: 1,000 mm via CNC Motor power: 11 kW Length: 3,800 mm Width: 2,050 / 2960 mm Iiedpfed Nkt Usx Ak Asf Height: 2,150 mm Weight: 8,650 kg • Stage execution • CNC Control - backgauge - Cutting angle - kerf - Cutting length • Ball screws for the back gauge • balls in the table • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm • Cut line lighting • Foldable up to 1,000 mm finger protection Incl. pneumatic sheet holding We have many references!

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Ijdpfxszukiis Ak Asif Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Iedpjzd Dfijfx Ak Ajif Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, CNC Vertical Wheel Lathe for Alloy and Steel Wheel Refurbishment A modern CNC vertical lathe designed specifically for the professional refurbishment of alloy and steel wheels. The machine enables fast and precise restoration of the original factory finish, whether the wheel has suffered mechanical damage, corrosion, or welding repairs. Its vertical design provides the operator with full control over the machining process, while the rigid, heavy-duty base ensures exceptional accuracy even when machining large wheels. It is the ideal solution for tire service centers, wheel refurbishment companies, automotive detailing businesses, and small-batch manufacturing operations. Unlike a conventional universal lathe adapted for wheel machining, this machine has been engineered exclusively for wheel refurbishment. This provides several key advantages: Shorter machining time per wheel Minimal cutting tool wear Superior surface finish without chatter marks or waviness Fast and easy operator training The finished surface matches the original factory diamond-cut appearance, allowing workshops to offer premium refurbishment services while significantly increasing profitability. Key Benefits Suitable for passenger car and light commercial vehicle wheels High-precision reproduction of the original diamond-cut finish Quick workpiece setup and intuitive operation Consistent, repeatable machining results on every wheel Heavy, vibration-resistant machine construction Increased profitability of wheel refurbishment services Technical Specifications Parameter Specification Maximum Turning Diameter 700 mm Maximum Wheel Diameter 660 mm Maximum Chuck Diameter 670 mm Spindle Speed 50–1200 rpm Feed Rate 0.1–1000 mm/min Vertical Travel (Z Axis) 550 mm Horizontal Travel (X Axis) ±330 mm Rapid Traverse (X Axis) 3000 mm/min Rapid Traverse (Z Axis) 3000 mm/min Tool Size 25 × 25 mm Motor Power 4 kW Machine Weight 1200 kg Isdpszpww Ajfx Ak Aoif Overall Dimensions 1300 × 1250 × 1960 mm Applications Removal of curb rash, scratches, and surface damage Wheel preparation for painting or polishing Restoration of diamond-cut decorative surfaces Refurbishment of wheels after straightening and welding Machining of new wheels for low-volume production Equipment (Depending on Configuration) Special wheel chuck Software package with wheel profile optimization Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance

Condition: new, Year of construction: 2026, Brand new precision vertical slotting machine – a machine of exceptionally high quality. CNC-controlled vertical slotting machine with two, three (or four) CNC axes and electronic rotary table control with a positioning accuracy of 0.001°. Ideal for the efficient production of keyways (including tapered and tangential slots), spline hubs, internal and external gears, racks, etc. CNC control with 10" color display and touchscreen – software for roughing, finishing, and fine finishing (enabling surfaces of the highest possible quality). Iisdpfx Ajzhkkyek Aof Stroke range of slotting ram: 10 to 250 mm Slotting ram speeds: 22 to 90 strokes/min, infinitely adjustable Slotting ram swivel range: +/- 20° Rotary table diameter: 450 mm Rotary table bore Ø: 135 mm Maximum table load: 1,250 kg Table travel (X/Y): 250 x 225 mm Ram drive servomotor power: 3 kW Machine dimensions without control console: 1.3 x 1.45 m x approx. height 2.6 m Machine weight approx. 1,700 kg - Automatic electronically monitored central lubrication system for the guideways - Cutting oil system for coolant supply to the slotting tools Other models available.

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Iiedjy Igbqjpfx Ak Aef

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 Iiedozqhdiopfx Ak Aof * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine Iedpfx Aszvd Unjk Ajif TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, total width: 2,450 mm, total length: 4,000 mm, input voltage: 400 V, input current: 32 A, feed length X-axis: 2,000 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 50 mm, working width: 1,700 mm, CUTTEC CNC Cutter Variocut with oscillating cutting tool, tool head with tangential axis. Cutting is performed on a cutting mat; material is fixed in place using a 7.5 kW vacuum system. Item location: 32105 Bad Salzuflen. Iodpjyi T Swefx Ak Ajif