Used Esc Continuous Dryer for sale (8,468)

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Pgsdpfjy E S E Njx Aireu

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Pedpfx Aioy E S E Aorogu

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Psdowg Sgcepfx Airjgu Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Through-feed dryer including exhaust ducts (each approx. 7.5 m) in double-walled stainless steel design! Podsx Arq Djpfx Airegu MACHINE DETAILS Max. solvent throughput: 5.00 kg/h Air and exhaust specifications Pipe diameter: 150 mm Exhaust air volume: approx. 900 m³/h Temperature: max. 180°C Pressure loss: max. 100 Pa Fresh air volume: approx. 1,800 m³/h (Σ) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg Input voltage: 400 V Input current: 22 A EQUIPMENT Documentation/manual Exhaust ducts (double-walled stainless steel version, each approx. 7.5 m)

Condition: good (used), Year of construction: 2008, ECS High Press Year: 2008⁠ ⁠ Max format: 720 x 1020 mm Min format: 350 x 560 mm Gripper : 10 mm Max frame size : 1140 x 1280 mm Adjustment angle: 30 Screen fine adjustment : /- 10 mm Max speed : 3300 sh/h. Podpfx Aottzwmsirjgu Main power supply: 10KW without YV dryer . Weight: 5500 Kg ECS UV dryer with 2 lamps - year 2002

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Podpfeyrm Hyjx Airegu Location: Schierling Inspection possible by appointment.

Condition: good (used), Code: 0389 Brand: ISVE Pgodpfx Aey Ti Ecsirou Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. Pgodpfsz Rz Dnsx Airsu • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: used, Year of construction: 2025, New showroom unit! Special price! The SMART compressed air refrigeration dryer ensures the best operational reliability and optimal working results by continuously drying the air to a pressure dew point of 4 °C (+/-1 °C). It features an easy-to-use control panel, which is used for all Schneider refrigeration dryers. The energy-saving heat transfer is achieved by pre-cooling the incoming warm compressed air using the outgoing cold air in the air-to-air heat exchanger. The heat exchanger, made of stainless steel and with generously sized flow cross-sections, ensures a consistently low pressure drop and high efficiency. An optional bypass, including VF and FF series filters, can be directly attached to the dryer. The dried compressed air is reheated to optimally protect the compressed air line from corrosion. In addition, the compact design allows for space-saving installation. Technical data: Power consumption 0.28 kW, Pressure drop 0.30 bar, Voltage 230 V, Weight 27 kg, Refrigerant R513A, Air outlet 3/4"a, Dimensions (W x D x H) 350x493x450 mm. Location: Rieth Pgsdpe Adu I Sofx Airsu

Condition: used, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear concept. Notable features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-off valves in a leak-proof design • Compact check valve combination, guaranteeing continuous operational reliability and high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve trays on the wet side • High-quality drying agents During adsorption, the drying agent stores the moisture contained in the compressed air. Parker Zander exclusively uses highly active molecular sieve drying agents with a high capacity. This drying agent guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the drying agent bed to be regenerated. The moisture stored during adsorption is removed with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: • Operating pressure of 7 bar • Inlet temperature of 35°C • Pressure dew point of -40°C • in a cycle with • 5 minutes adsorption • 4 minutes desorption • 1 minute pressurization The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The commonly used 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and, therefore, inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system • with new, groundbreaking functions and in a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. • It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. • From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with Multitronic. • The Multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of the cycle times is possible. Pgodpfx Asypb Duoirou • LEDs on the front for the individual functions, such as • Operation • Adsorption • Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of construction: 2009 Manufacturer's price: €8,880

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDE Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Pgsdpfszv Emlox Airju Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Podezf N Rgepfx Airegu Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: used, Year of construction: 2024, New display unit! Special net price! Product description: • Simple control • Refrigerant-cooled compressed air dryer with a 4°C (+/- 1°C) pressure dew point for demanding continuous operation • Standard equipment includes a high-quality, electronically controlled condensate drain • Maximum operational reliability of production equipment through stable continuous operation at a constant dew point • Space-saving installation due to compact dimensions (also designed for wall mounting) Technical data: Volume flow: 1200 l/min Pressure dew point: +4°C (+/- 1°C) Operating pressure: 7 bar Max. operating pressure: 16 bar Pressure loss: 0.25 bar Pjdpfs Adu Niox Airogu Voltage: 230 V / 50 Hz Power consumption: 0.27 kW Air connection: ¾" Refrigerant filling: R513A Dimensions (W x D x H): 350 x 493 x 450 mm Weight: 25 kg Storage location: Rieth

Condition: used, Year of construction: 2007, Technical specifications: - Manufacturer: Venjakob - Model: VEN DRY - Year of manufacture: 2007 Psdez A Utrepfx Airegu - Working height: 920 mm - Number of belt pallets: 6 - Belt pallets with conveyor belts - Pallet length: 6,450 mm - Usable length: approx. 6,200 mm - Inlet width: 1,400 mm - Dryer operates in continuous flow mode - Clearance between tiers: 75 mm - Heat requirement: approx. 137 kW - Hot water temperature: max. 70/60 degrees - Conveyor belt feed speed: 2–10 m/min - Temperature: max. 40 degrees - Air flow rate: 16,309 m³/h - Exhaust air flow rate: 2,400 m³/h - External dimensions: Length: 8,275 mm Width: 2,290 mm Height: 2,560 mm Height: 3,380 mm including supply air unit - Volts/Hz: 400 V/50 Hz - Available: 08/2026

Condition: used, Year of construction: 2001, machine/vehicle number: LA15, Used BERTOLASO WDT10 washer dryer - Year 2001Technical Specifications & Performance DataThe Bertolaso WDT 10 is an external bottle washer-dryer engineered for reliable operation in beverage production and industrial packaging environments. It combines mechanical brushing with targeted water jets to remove residues on the bottle body, bottom, and closure area, followed by high-energy air-knife drying. This second hand unit is well-suited for integration within a used bottling line and provides robust construction for continuous-duty applications.Model: WDT 10Manufactured by: BertolasoYear: 2001Speed: 3.000 - 5.000 BPH Function: External bottle washing and dryingWashing system: Rotating brushes with directed water jetsDrying system: Seven blower motors with high-velocity air blades/hot airBottle handling: Infeed worm screw; infeed and outfeed star wheelsConstruction: Stainless steel frame and claddingGuards: Polycarbonate guard doorsElectrical supply: 400 V, 50 HzInstalled power: 20 kWApprox. mass: 2400 kgDocumentation: Complete electrical documentationAdvanced Automation & Control SystemsAutomation is anchored by a Danfoss variable-frequency drive for smooth speed control and Siemens control components for dependable governance of washing and drying sequences. The machine supports manual and automatic operating modes, allowing quick adaptation from setup and maintenance to full automatic production. Electrical specifications include 400 V, 50 Hz with a 20 kW installed load, making it straightforward to integrate into standard industrial power networks. Protective guarding enhances operator safety and visibility during operation.Production Line Integration CapabilitiesThe WDT 10 integrates easily into upstream and downstream bottling equipment thanks to its worm-screw infeed and star-wheel transfer, ensuring consistent bottle spacing and orientation. It is designed for bottle handling in beverage production, whether operating as a standalone module or inline with fillers, cappers, labelers, and packaging machinery. This flexibility supports a range of industrial packaging layouts for PET and glass bottles.Machine Condition & Maintenance HistoryThis second hand external bottle washer-dryer is presented in working condition with complete electrical documentation, facilitating commissioning, service, and spare-parts management. The robust stainless steel construction and established component brands contribute to long-term reliability and maintainability for beverage production environments.Operational Performance & VersatilityThe dual-action cleaning approach—brush scrubbing combined with targeted water jets—ensures thorough external cleaning of cylindrical containers, including difficult areas around the bottom and closure. The drying tunnel uses seven blower motors and air blades to deliver effective surface drying prior to labeling, coding, or secondary pac... Pgjdpfxj Ady Azj Aireu

Condition: new, Year of construction: 2025, Ex-display model available immediately: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 78 Model: ALM-DGO 78 Flow rate: 1.30 m³/min* Year of manufacture: 2025 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. R513a refrigerant: efficient, environmentally friendly, and long-lasting. Pgodpfxez Dwtds Airju Compact footprint for space-saving installation. Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Pressure drop: 0.14 bar Average power consumption: 0.29 kW Voltage/Frequency: 230V/50Hz Compressed air connection: 3/4" Dimensions (L x W x H): 364 x 432 x 486 mm Weight: 21 kg Convenient leasing options via our partner bank are available for new machines. Visit our showroom / retail store.We always stock a large selection of new and used compressors!

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system Pgedpfozmwdkex Aireu • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Podsy Ty Sgjpfx Airogu Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. Pgjdpfexxx I Uex Airsu - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...

Condition: used, GFO Type: Ke/SO Chamber dryer Approximate external dimensions: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Approximate internal dimensions: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber preheating oven must not be used for flammable or explosive materials. The chamber preheating oven must not be installed in an explosion-proof area. Continuous chain conveyor External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Podozdzixepfx Airsgu Carrier bars: 13 pieces Spacing: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min Load per carrier bar: max. 10 kg Total load: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Pedszkv R Djpfx Airsgu Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: new, Year of construction: 2026, Display Model: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 365 with time-controlled condensate drain Type: ALM-DGO 365 Volume flow rate: 6.08 m³/min* Year of manufacture: 2026 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Pjdpfx Aijz Egtierogu Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. Refrigerant R513a: efficient, eco-friendly, and durable. Compact footprint / Space-saving design. Technical Specifications: Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Average power consumption: 0.94 kW Voltage / Frequency: 230V / 50Hz Compressed air connection: 1 1/2" Dimensions (L x W x H): 527 x 627 x 1123 mm Weight: 74 kg Financing & Showroom: Convenient leasing options via our partner bank are available for new machines. Feel free to visit our showroom / retail store. We constantly stock a wide selection of new and used compressors!

Year of construction: 2006, condition: used, functionality: fully functional, overall weight: 169 kg, maximum load weight: 17 kg, total length: 1,120 mm, total width: 790 mm, total height: 1,720 mm, machine/vehicle number: 04350 / 0001642 (QC: 61401257), Professional 17.5 kg Industrial Electric Tumble Dryer with Selecta Programmable Control The Electrolux T4350 is a professional front-loading industrial tumble dryer manufactured by Electrolux Laundry Systems, Sweden. Designed for demanding commercial laundry and garment finishing operations, this robust machine combines reliable performance, low operating costs, and user-friendly programmable controls. With a 17.5 kg drying capacity, reversing stainless steel drum, and Electrolux's proven Selecta control system, the T4350 is ideal for continuous industrial use in laundries, garment factories, hotels, hospitals, and textile finishing facilities. This unit was previously used in the MASI JEANS factory and remained fully operational until the factory shutdown. Video recorded 01.04.2026. Technical Specifications • Manufacturer: Electrolux Laundry Systems • Model: T4350 • Type: N2350ES • Product Number: 9873802060 • Serial Number: 61401257 • Year of Manufacture: 2006 Podpfx Aozmxn Roirjgu • Country of Manufacture: Sweden • Drying Capacity: 17.5 kg • Heating Type: Electric • Total Power: 19.3 kW • Power Supply: 400 V, 3-Phase, 50 Hz • Current: 28 A • Recommended Fuse Size: 35 A • Protection Class: IPX4 Key Features • 17.5 kg professional drying capacity • Electrolux Selecta programmable control system • LCD display with programmable drying programs (P1–P9) • Reversing stainless steel drum for even drying • Automatic anti-tangling drum rotation • Large front loading door • Easily accessible lint filter • Heavy-duty industrial construction • Designed for continuous commercial operation • Energy-efficient electric heating system Includes • Electrolux T4350 industrial tumble dryer • Integrated Selecta control panel • Stainless steel drying drum • Three-phase power cable and industrial plug Applications • Commercial laundries • Garment manufacturing • Denim production • Textile finishing • Hotels • Hospitals • Industrial laundry operations • Professional garment drying Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Exceptionally clean drum interior • Good overall industrial condition • Normal cosmetic wear consistent with professional use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting, dismantling, loading, transportation, and all related costs. The machine is already positioned on a heavy-duty wooden pallet, facilitating loading and transport. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and garment finishing line.

Condition: new, Eurotec Innovation RT27 – Rotary Dryer / Drying System (Made in Germany) Machine type: Rotary Dryer Manufacturer: Eurotec Innovation GmbH Model: RT27 The RT27 rotary dryer by Eurotec Innovation is a powerful and efficient solution for drying workpieces after vibratory finishing. By using drying media (granulate) and direct heating, parts are dried quickly, gently, and without stains. The system not only enables drying, but also simultaneous post-polishing of the components – ensuring optimal surface quality in a single process step. 🔧 Technical Data: Gross volume: approx. 270 liters Effective volume: approx. 140 liters Drive power: approx. 1.6 kW Heating power: max. 4 kW Power supply: 400V – 16A – 50 Hz Advantages: ✔ Fast and cost-efficient part drying ✔ Spot-free surfaces after vibratory finishing ✔ Drying and polishing in one operation ✔ Integrated screening section for automatic part separation ✔ Switchable between batch and continuous operation ✔ Spiral-shaped rising bowl bottom for gentle processing ✔ Expandable with extraction systems, sound enclosure, and automation 🏭 Applications: Drying of parts directly after the vibratory finishing process Polishing and post-processing Reduction of stains and water marks Protection against flash rust through complete drying Processing of complex geometries The RT27 is the ideal complement to vibratory finishing systems and ensures an efficient, reliable, and reproducible drying process – perfect for industrial applications. Additional variants and custom configurations are available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded. Pgjdpof Sqfbofx Airou

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pgsdpfxeyzaamj Aireu Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar