Used Euromaquina Avs 100 Pointing Machine for sale (79,995)

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Gusdpfx Alsymac Re Asd Forming capacity: 4 x 100 Mp Number of strokes: 560/min Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Gujdpfsymaduox Al Aed The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Gsdpjymadnefx Al Ajud The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS63 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Gedpfsymadhex Al Asud Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm Guodpeymacwefx Al Asd - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 40,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. Gjdpfx Alezibgho Ajud In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Guodpfx Alewycmmo Aod Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Guodpfxey Eylws Al Aod Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse Godpfeyxyansx Al Ajud - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle Godpfx Alsy Dkgpo Aoud - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas ✔ Fast heating and ready-to-use performance for quick jobsite deployment ✔ Durable construction for intensive daily use in demanding environments ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Pothole edge reinforcement • Preventive road maintenance programs • Municipal streets and highways • Parking lots and industrial pavements • Driveways, sidewalks, and bike paths • Small and medium-scale asphalt repair works Built for Professional Road Maintenance The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. Why Choose TICAB BPM 100? Gjdpfx Alex U Atvj Asud • Simple operation with high productivity • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Condition: used, functionality: fully functional, machine/vehicle number: PT 320, Drill point thinning machine. 3000 rpm, grinding wheel diameter 8" Gedex Trqnepfx Al Aoud Power supply 380V / 50Hz

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed Guodpfxjwka S Ij Al Ajd - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BX1-FR100SN.A4K-004, For sale is a high-quality Zwick/Roell material testing machine, consisting of: Load frame Z100 Guodpfxezkugkj Al Asd Machine type, axial: BX1-FR100SN.A4K-004 Machine type, torsion: BXC-TD0500.A4K-002 Force sensor, type Series K (100kN) Torque sensor, type Series NM (500Nm) Various ZPVs (Central Test Specifications) The system comes from a laboratory setting and was used for mechanical material testing. All devices are used, well-maintained, and fully functional.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 100W is a brand-new portable laser metal cleaning machine. This model has 1 mirror and 1 seam type. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 100 W machine characteristics: Cooling: Air Laser power: 100 W Machine size: 750x600x680 mm Laser source: JPT Weight: 46 kg Guodpfxer Hbwke Al Aed Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, Flexor 440IS with EyeC ProofRunner Web 450 print image inspection system and REA-JET HR 4K printing system. Guodpfxjwkt D Do Al Aod The Flexor 440IS is the ideal fully integrated 100% inspection solution. The 440IS machine allows the operator to inspect a web width of up to 440 mm and remove defects. The machine offers flexibility and high performance demanded by customers with the highest quality standards. High-speed inspection, low maintenance costs, and full integration of the 100% inspection camera provide converters with a package that exceeds all expectations. The offer price is exclusive of camera and inkjet unit. These can be selected according to customer requirements and preferences. Have we sparked your interest? We would be happy to assist you!

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight 100 kg Min.Rotor Weight 5 kg Min.Diameter 100 mm Max.Diameter 800 mm Engine Power 5.5 kW Godpjylqg Dofx Al Asud

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: TP109, Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Guodpfx Asvgvabol Aed Current State and Electrical Requirements The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation. Conclusion of teh Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph offers an effective and reliable solution for bottling operations. In particular, it boosts efficiency by combining precise capping heads, strong safety features, and simple maintenance requirements. Additionally, its seamless compatibility with standard production lines and energy-efficient operation provide ...

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 14 calibres, ranging from a maximum diameter of 11 mm to a minimum diameter of 3.5 mm Weight: 260 kg In very good, well-maintained condition Guodpfxsy Ubtho Al Asd

Condition: used, Year of construction: 1993, total length: 2,360 mm, total width: 1,450 mm, total height: 1,820 mm, For sale: Simo deboning machine, type HD 100/225, year 1993. Serial no.: 93-08702. Dimensions: 2360x1450x1820 mm. Hopper: 1120x940 mm. Net price: €9,000. Price negotiable. Gedpfxey Hizke Al Ajud

Year of construction: 2007, condition: refurbished (used), functionality: fully functional, machine/vehicle number: L110-NC6-NC5-k8-12-S80-104, Keystone Automatic Pointer Machine for Sale Available for sale is a Keystone Automatic Pointer machine in used, fully operational condition. Gedpoy Epldofx Al Aeud This machine is designed for the automatic processing and pointing of square wooden rods and is a robust industrial unit built for continuous use. Keystone machines are renowned for their sturdy construction, reliable operation, and ease of use. Machine Details: * Manufacturer: Keystone * Model: Automatic Pointer * Condition: Used * Working condition: Fully functional * Application: Automatic pointing / shaping * Configuration: Converted to 380 V, equipped with hydraulic unit and discharge conveyor The machine can be inspected by appointment. Further information, technical details, photos, or a video of the machine in operation are available upon request. Location: Baranya, Hungary Subject to prior sale and errors excepted.

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself Gjdpfx Ajhm S Ruel Aoud The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW Gedpfx Aofw A D Njl Ajud PTO drive Tractor pump

Condition: new, Year of construction: 2025, Precision vices feature high clamping rigidity and long-term reliability. Vices from this series allow for changing the position of jaw inserts, making it possible to increase the area of clamping. Features and applications Base made of durable cast iron Possibility of changing jaw inserts for increased work area Movable jaw design provides additional clamping of the workpiece to the base Repositionable jaw inserts, can be placed on both sides of the jaws Possibility of using a number of vices at once Used with milling machines, boring machines, CNC machines Technical data Jaw height 100 mm Jaw width 32 mm Maximum L1 jaw opening 100 mm Guodpfx Ajvxg Elsl Asd Maximum L2 jaw opening 150 mm Maximum L3 jaw opening 215 mm Maximum L4 jaw opening 265 mm Transverse bar width 14 mm Longitudinal bar width 14 mm Hexagonal head of the drive shaft 14 mm Dimensions 305×100×86 mm

Year of construction: 2021, condition: used, functionality: fully functional, Remarc Sweeping Machine KM 100 H — Year of manufacture 2021 Gujdpfx Asy A E Tbsl Aod Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request