Used Evaporative Cooler for sale (1,897)

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III fill system, which allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Main Features of the S1500E Series Maintenance Access: A large, inward-swinging access door, as well as internal maintenance platforms, allow technicians to conveniently perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight through special air inlet elements, which reduces algae growth. Flexibility: Thanks to the single-sided air inlet, the cooling tower can also be installed in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. Air Conditioning (HVAC): Used in large building complexes as part of a central chilled water system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity because the actual performance depends entirely on the prevailing thermodynamic ambient conditions and the system temperatures. This model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the inlet warm water temperature (e.g., 35 °C) and the outlet cold water temperature (e.g., 29 °C). Air volume flow: According to the technical data from BAC, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three 11.0 kW fan motors. If this air volume is reduced by a frequency converter (e.g., during nighttime operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of cooling capacity the tower produces. Technical Data: Fan & Air Data Air volume flow: 60.0 m³/s (generated in draw-through operation) Fan motors: 3x 11.0 kW (axial fans) Technology: Integrated belt drive Water flow: 198 l/s Hydraulic Connections Kdedpsynkbmsfx Aniou Water inlet (fluid inlet): 1x DN 250 (nominal size ND 250 mm) Water outlet (fluid outlet): 1x DN 300 (nominal size ND 300 mm) Make-up water connection: 1x DN 40 (ND 40 mm) Overflow / drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions & Weights Operating weight: 11,446 kg (including water filling up to the overflow) Shipping weight: 5,350 kg (empty weight) Heaviest single part: 3,

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Kodjzdknqjpfx Aniodu

Condition: excellent (used), Year of construction: 2007, Used, draw through water/glycol cooler, brand Alfa-Laval type INR W S 6777D/Y. YOM: 2007, SN: 2190988. Max DN = 57 mm; Vn = 3҇230/400V, fluid group 2, coil TS 110/-40°C, F = 50 Hz, PT = 10 bar, PS = 9 bar, own weight: 604 kg. This, in very good condition draw through water/glycol cooler is equipped with: 2 pieces Ziehl Abegg ventilators 07078866, FC063-4DS6KV7, each Ø500, 1,19 kW, 1360/1000RPM; COSY 085, surface more than 90 m2, aluminium casing/aluminium fins Mentioned cooling capacity is with a water/glycol mixture of 30% at a water/glycol basis. Sales price: 2.960 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Kdodpfx Aneucnzwsieu Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), functionality: fully functional, cooling capacity: 895 kW (1,216.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,525 kg, input voltage: 400 V, total width: 2,400 mm, total length: 12,960 mm, total height: 2,850 mm, warranty duration: 6 months, Gas cooler & Evap CX heat pump Güntner S-GGDV CD 090.1 DE/2C-E-44 Gas cooler capacity: 895.0 kW Evaporator capacity: 465.0 kW Refrigerant temperature: inlet 120.0°C — outlet 37.0°C (gas cooler) Kedozqui Ejpfx Aniedu Evaporation temperature: -2.0°C (evaporator) Air flow: 216092 m³/h Fans: 24 pcs. EC, 3~400V 50-60Hz Tubes: copper / Fins: epoxy coated Heat exchange surface: 4839.5 m² Max operating pressure: 130.0 bar Dimensions: 12.96 x 2.4 x 2.85 m Weight: approx. 6525 kg Condition: used for testing

Year of construction: 2023, condition: used, functionality: fully functional, For sale: 300-liter vacuum concentrator – in almost new condition! Hagyo Vacuum Universal 300, an industrial vacuum concentrator manufactured in 2023, used only 10-12 times. Regularly serviced and ready for immediate operation. Vacuum concentration is an extremely gentle process: the water evaporates at a temperature below 50 °C, thus preserving the color, aroma, and nutritional values of the raw material, and the final product becomes much more enjoyable. Ideal for: concentrating pressed fruit juices to a jam-like consistency with a high refractive index, at low temperatures, without damaging the fiber and aroma characteristics, concentrating vegetable juices to a jam-like consistency (e.g., pumpkin, carrot, beetroot), extracting spices and herbs at low temperatures. Unique modifications made to this machine (not found on other machines in the series): high-performance defoaming unit, a 300-liter collection tank with a cleaning opening instead of the standard 100-liter tank, so the machine does not need to be stopped for emptying, new silicone elements on the mixing blade. Key features: 300-liter filling volume stainless steel construction, double-walled, with heating jacket mixing and vacuum system with automatic temperature control stainless steel final cooler (condenser) built-in CIP cleaning system, each unit can be cleaned separately evaporation capacity: 30 l/hour (at 50 °C) electrical connection: 400 V, 38 kW (3×63 A) overall dimensions: 2000 × 1550 × 2550 mm Hungarian-language operating manual and machine documentation included Kodpfxoz Iwxns Anisdu Price: 12,000,000 HUF Viewings can be arranged in Szenna (Somogy County) by prior appointment. Reason for sale: change of business profile. Write a message, and I will send you more details!

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. Kdjdpfx Ansg N Db Hjiou • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Kdedpjrzq Arsfx Aniju Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Year of construction: 2007, condition: excellent (used), Evaporator GOEDHART, type VRZ 126310-GFP - 2 identical pcs. in stock. PJV071924-01 and PJV071924-02 Qo=39.3kW, Vo.x=25750 m3/h, F=262m2, 2 fans with diameter 630mm, s=10mm, dimensions of the cooler: LxBxH: 286 х 126 х 111 cm; Coolant (NH3) Very good condition Price Euro 1800 Euro + VAT per piece, negotiable, ExWorks: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Kdjdpfoip Ungex Aniju

Condition: as good as new (ex-display), Güntner GASC RX 031.1/4-40 Industrial Air Cooler / Evaporator (SN: 501007088/03.00350), Used Machine MAIN TECHNICAL SPECIFICATIONS AND NAMEPLATE INFORMATION: - Manufacturer / Brand: GÜNTNER (Güntner GmbH & Co. KG) - Type / Model: GASC RX 031.1/4-40 A-1823671 - Serial Number: 501007088/03.00350 - Year of Manufacture: 2016 - Fan Data: VT03164U / 2464 / 1320 rpm (4-fan system) - Internal Volume: 7.5 Liters - Max. Permissible Pressure (PS): 32 / 0 bar (and 0 / -1 bar) - Permissible Temperature Range (TS): -50 °C / +100 °C (-5 °C / +40 °C) - Test Pressure / Medium (PT): 35.2 bar / Compressed air - Test Date: 21/01/2016 - Fluid Group / State: 2 / Gaseous APPLICATION AND FEATURES: - Specially designed for ceiling-mounted / slimline industrial cold rooms, cold storage facilities, logistics, and food industry refrigeration rooms. - Quiet operation, excellent efficiency, and uniform air distribution. - Well-maintained, in excellent technical and cosmetic condition. OVERALL DIMENSIONS: Ksdpfx Aez Aq Ihenijdu Width: 3110 mm Depth: 700 mm Height: 600 mm

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: Kjdpfxolc Dwvs Anisdu 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Kdsdozivkbepfx Aniou Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Kdjdpfx Ajzudaboniju Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials Kodpeyrxwwefx Aniodu * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H2618, overall weight: 5,200 kg, total length: 3,400 mm, total width: 1,900 mm, total height: 2,400 mm, motor manufacturer: Grasso, power: 445 kW (605.03 HP), Used Grasso FKS PP 450/S water-cooled chiller operating on ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor – 50 Hz – 110 kW – 2970 rpm, brazed plate heat exchanger as evaporator, brazed plate heat exchanger as condenser, Grasso oil separator with a capacity of 275 litres, oil cooler, oil pump, and a control cabinet with a Siemens Simatic HMI controller. Capacity is based on chilled water inlet/outlet temperatures of 12°C/6°C and cooling water temperatures of 27°C/32°C. Specifications Brand: Grasso Type: FKS PP 450/S Capacity: 445 kW / 126.5 Tons (Chilled water: 12°C/6°C & hot water: 27°C/32°C) Refrigerant: Ammonia Weight: 5,200 kg Dimensions: 3,400 x 1,900 x 2,400 mm (LxWxH) Ksdpfx Ajxz Ek Uonijdu Compressor: Grasso HMR-H36S-28 Display: Siemens Simatic HMI Year of manufacture: 2017

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Kjdpfx Asrz R Arjnijdu Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Kodoztrbwopfx Anisdu

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Kdjdpfjzh E Awsx Anisu Winter relief Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Volume flow: 110 m³/h Refrigerant: R407c Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Year of construction: 2025, condition: used, Cream cooler, Gram SKS 64 BÄKO-line Kedpfx Anez A Sq Uoiodu Year of manufacture: 2025-02 Condition: fully functional Housing and interior made of stainless steel with a foldable, self-closing door; 2-fold LED lighting; for sheet metal sizes 60 x 40 cm (lateral insertion); innovative convection system with intake air guidance prevents clumping or drying out of the goods; electronic control with simple operation and safety function for optimal product protection; filter change indicator; automatic defrosting and condensate evaporation; door seal replaceable; lockable; includes height-adjustable support rails Dimensions (H x W x D): 200 x 82 x 77 cm Interior dimensions (H x W x D): 138.6 x 68 x 58.5 cm Gross/Net capacity: 603 l / 417 l Temperature range: -5 °C to +12 °C Connection: 230 V / 50 Hz / 234 W Consumption: 372 kWh in 365 days Refrigerating capacity: 410 W at -10 °C Refrigerant: R-290 Energy efficiency class: B Weight: 131 kg

Condition: like new (used), Can be modified into a freezer. Perfect for bread cooling/freezing because of the big tier pitch Full Specs and price on request Kjdpfoycvplox Anijdu 610mm wide stainless steel belt with overlay (Omnigrid) fully stainless steel frame New plastics Brand new gearbox Brand new control panel

Condition: used, Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger Ksdpeqva Nyjfx Anijdu -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Year of construction: 1993, condition: used, Air cooler, evaporator, cold store, refrigerated container, cold room, ceiling air cooler -Number: 1x fan -Fan diameter: 400 mm -Lamella spacing: mm -Dimensions: 1030/1770/H400 mm -Weight: 82 kg Kedpfxsb N Ulio Anijdu

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 51.8 kW (70.43 HP), type of input current: three-phase, type of cooling: air, overall weight: 285 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,500 mm, total height: 1,270 mm, warranty duration: 6 months, Air Cooler Guntner GACV FP 080.1JF/1A-40E 51.8 KW Cooling capacity: 51.8 kW / 14.73 tons Year of manufacture: 2020 Options: Electric three-phase system heating. Fluid: Glycol Air flow: 17934 m³/h Fluid flow: 2.18 m³/h Number of fans: 1 pcs. Volume: 44.5 dm³ External surface: 239.8 m² Dimensions: 2.5 x 1 x 1.27 m. Weight: 285 kg. CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Kodpoz Hkdzjfx Anijdu After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Kdedpsxn Uq Dofx Anisu

Condition: used, Year of construction: 2013, Ammonia separator (from a refrigeration system with max. 180 kW) with 2 chambers 1 x for ice water and brewing water cooling to = +0.5°C 1 x for glycol cooling to = -10°C (=extension) Brewing water cooler (53 kW): Flow rate: 35 hl/h, inlet temperature: 15°C, outlet temperature: 2°C Ice water cooler (38 kW): Flow rate: 130 hl/h, inlet temperature: 4.5°C, outlet temperature: 2°C Additional title: with 2 evaporators for water cooling Content: 595 l Pressure range: -1 bis 16 bar Temperature range: 50 °C Weight: 780 kg Position: frei stehend Base construction: Horizontal tank with stainless steel square tube base on dome feet Kjdpoxzqt Usfx Aniedu Features: Insulation with bolted cladding, base frame with fittings and evaporator 1 (= heat exchanger for brewing water cooling) and evaporator 2 (= heat exchanger for ice water cooling)

Condition: used, This listing is for the Julabo FL601 Recirculating Cooler/Chiller The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Ksdpfxoxhf A Dj Anisdu Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support