Used Exile Technologies Exile Spyder Ii Dts 30 for sale (46,253)

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum Nlsdpfxexb Ru Eo Alhoc • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, year of last overhaul: 2026, We are offering this used Exile SPYDER II DTS 30 machine for CTS/computer-to-screen creation of printing stencils for screen printing. THE MACHINE WAS RECENTLY SERVICED AND THOROUGHLY OVERHAULED BY THE MANUFACTURER IN 04/2026: - NEW PRINT HEAD - HARDWARE AND SOFTWARE UPDATE (including a new board for controlling the print head) - REPLACEMENT OF SMALLER COMPONENTS (including a vacuum regulator) Njdoy Itr Aspfx Alhelc Despite being manufactured in 2021, this SPYDER II is technically up-to-date in terms of its most important components and delivers correspondingly very good and precise results. The print quality has improved significantly since this upgrade. In textile screen printing, we use it to expose halftone screens up to 60 LPI, but the machine also prints finer test files. The reason for considering selling the machine at this time is the transition to a laser-to-screen device. Model: SPYDER II DTS 30 Serial number: 900-100560-MHM/120 Date of manufacture: 05/2021 Service and upgrade: 04/2026 If you have any questions or need more information, please send us a message or call us. We will gladly send videos and additional photos. An on-site inspection is possible at any time. PICK-UP ON SITE ONLY FLEXIBLE PAYMENT OPTIONS / INSTALLMENT PAYMENTS POSSIBLE

Condition: ready for operation (used), Endress + Hauser FDL 30-FGB2A7R Liquiphant II level sensor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Njdpfx Alsi D Ur Ashelc

Condition: used, This listing is for a CFS Protemist DT II Automated Protein Synthesizer Abnova presents a new generation, fully automated robotic desktop protein synthesizer, Protemist® DT II, for high throughput eykaryotic protein production. The system is developed and manufactured by CellFree Sciences Co., Ltd. It synthesizes the protein of interest using a special wheat germ lysate and a bi-layer reaction. Protemist® DT II can run two scales of translational reaction, 1.2 ml (24 well) or 6 ml (6 well). Batch affinity purification is available for affinity tagged fusion protein synthesized in 6-ml (6 well) reaction scale. This is an expert system in transcription, translation, and purification. The protocol and automation is designed for easy operation obviating the need for manual handling and production. Specifications Dimensions: 79cm(h) x 50cm(d) x 70cm(w) Weight: 100 kg Power: 100~240 V 50/60 Hz Voltage Fluctuation Tolerance: ±10% Power Consumption: 350 VA Max. Number of Samples Per Run: 6 samples: transcription, translation and affinity purification (6 ml/sample) 24 samples: transcription, translation (1.2 ml/sample) Processing Volumes: 100 ul to 800 ul Reagent Unit: Temperature Control Method: Peltier moduleTemperature Setting: 4°C (Fixed) Dispensing Volume Variation: Within ±5%, CV < 1% (in dispensing 100 µl distilled water) Ambience for Installation: 15~30°C, humidity < 75%, dew condensation to be avoided Nlsdpfx Alexzh Ucjhjc

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Njdsdyl H Njpfx Alhelc Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: used, This listing is for the Agilent Stratagene MX3005 Real-Time PCR System. The unit is in full working condition and ready for immediate use Designed for accurate quantitative PCR, it features precise thermal control, multi-channel fluorescence detection, and user-friendly software integration, ideal for gene expression and molecular diagnostics workflows. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Nsdpfx Aloy Hrbtohslc • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Nlsdpfx Alozdrzxohjc Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Nljdetp Hgzspfx Alhjc Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Njdozdzzhepfx Alholc

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 FEATURES: Nljdpfxozda Dvo Alhoc - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 11,070 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Chassis Steel welded construction Nedsi Riwfspfx Alholc Turntable with robust ball bearing race Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear across the entire width Partial wheel arches on the 1st axle with anti-spray flaps, anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock. Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-bed trailers 1 pair of recessed ring tie-down points at the front on the drawbar, each 5 tons 7 pairs of recessed tie-down loops on the top and sides of the outer frame, each 10 tons 1 x at the front on the drawbar 6 x in the low-bed area First tie-down point 250 mm from the front and last tie-down point max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 5 pairs of recessed beam pockets in the outer frame, interior 70 x 40 mm (can be converted to 5-ton ring tie-down points, not included in the scope of delivery) 2 pairs of folding tie-down points in addition, each 10 tons 1 x on the drawbar (projects) 1 x behind the last axle, recessed in the floor Coupling device, trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels & Tires 235/75R17.5 according to manufacturer's choice with M&S marking Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Manufacturer: Wabco or Knorr Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Drawbar at the front with steel/diamond plate surface Storage box in the ramp slope recessed into the drawbar followed by 70 mm softwood floor, steel/diamond plate surface in the wheel arch area Rear slope with 70 mm softwood floor Low-bed area including rear slope 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable additional ramp securing device, foldable at the bottom (to prevent lateral slippage of the ramps, not in conjunction with lateral hydraulic ramp adjustment) covered with wood with spring-loaded support Operating instructions With an axle load of 10,000 kg, a special permit is required; only indivisible loads are permitted!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and fifth-wheel loads. Country of registration/plates Country of registration: Germany Type approval according to EC 2007/46 24/7 service hotline

Condition: good (used), Year of construction: 1970, Rail track gauge: 900 - 1680mm Max. wheel tread Ø: 1300mm Min. wheel tread Ø: 650mm Max. axle length wheel set:2350mm Min. axle length wheel set:2050mm Max. clamping Ø: 1050mm Min. clamping Ø: 700mm Face plate Ø: 1400mm Speeds / ranges: 31,6Rpm Number of slides: 2 Sjablone copy attachment: 2 Power: 90kW Length: 5400mm Width: 3600mm Nsdewvkb Rjpfx Alhslc Height: 2900mm Weight: 56000kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 15,600 kg, maximum load weight: 8,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Chassis Steel welded construction 1 pair of wheel recesses embedded in the steel platform in the wheel arch area, angled for access, length at the bottom approx. 1400 mm, approx. 400 mm deep. Frame in the main beam area is 400 mm higher than the wheel recess. If machines are to be transported where the overall height needs to be checked, please provide the technical data sheet of the machine types with precise details (if the overall height is exceeded -> customer's risk, approval required). Depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with robust ball bearing race, storage box embedded in the turntable extension. Foldable rear support. 2 chock blocks with holder. Aluminum side impact protection. Splash guards at the rear, covering the entire width. Extendable widening elements to 3,000 mm (not in the rear slope). (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm.) Storage compartment for wooden planks in the center of the loading area. Wooden planks 70 mm for widening to 3000 mm. Tie-down eyes, low loader 110 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front. Includes 6 pairs of tie-down rings embedded on top and on the side in the outer frame, each with 10 tons capacity. 1 x in the neck area. The remaining ones are distributed in between, with a distance of no more than 1200 mm. 1 x rear slope. 5 pairs of pocket slots embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 tons ring tie-down eyes, not included in the scope of delivery). Coupling device, trailer turntable. Drawbar with tested 40 mm drawbar eye. Axles + Suspension SAF drum brake axles. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Nlodpoi Ri Rysfx Alhec Parabolic suspension with maintenance-free steel-rubber bearing. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle. ABS and ALB, with ABS plug at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Wheels & Tires 235/75R17.5, according to manufacturer's choice. Steel rims in twin configuration, factory silver. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red side marker lights at the rear. 2 x 7-pole fail-safe plugs at the front, with connection cable. 1 LED rotating beacon with holder, switched via the sidelights (beacon can be removed). 2 pairs of warning panels, double LED-illuminated and extendable to 3,000 mm. Floor Front area, steel floor, included. Thereafter with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering. Rear slope with 70 mm soft wood floor. Low loader platform including rear slope 8,200 mm. Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable. Covered with wood. With spring-assisted support. Operating instructions At 10,000 kg axle load, an exception permit is required, only indivisible load is possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while observing the permissible axle/support and saddle loads. Country of registration/sign

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 wheel chocks + holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle 1 pair of wheel recesses embedded in the low-bed area in front of the 1st axle, angled for entry, approximately 1600 mm long at the bottom, approximately 400 mm deep. Note: Frame in the main beam area is 400 mm higher than the wheel recess. 2 pairs of wheel recesses embedded in the low-bed area between the axles, angled for entry, approximately 600 mm long at the bottom, approximately 300 mm deep. Note: Frame in the main beam area is 300 mm higher than the wheel recess. Extensible widening to 3,000 mm (not in the rear slope) Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 1 pair of tie-down cutouts embedded in the longitudinal beam at the front in front of the 1st axle, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons. 7 pairs of tie-down eyes embedded on the top and side in the outer frame, each 10 tons. 1 x at the front in front of the 1st axle 6 x in the low-bed First tie-down eye 250 mm from the front and last max. 250 mm from the rear, distance between tie-down eyes not greater than 1100 mm Coupling device, trailer turntable Tow hitch with tested 40 mm tow ball Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235/75R17.5, according to manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extensible to 3,000 mm Floor Front slope with steel/diamond plate covering Storage box embedded in the drive-over slope to the front slope, then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 6500 mm Ramps Nodoi Ri Rvepfx Alholc Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood With spring-assisted support Operating instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) Registration country/Signs Registration country: Germany With DEKRA acceptance and certi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, total length: 11,990 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. More information Chassis Steel welded construction Turntable with heavy-duty ball bearing, storage box recessed in the turntable extension Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Extendable widening sections to 3,000 mm (not in the rear slope) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes for low-bed trailers 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front 6 pairs of tie-down recesses on the top and sides of the outer frame, each with 10 tons capacity 1 x near the gooseneck area the rest distributed in between, with a distance of no more than 1200 mm 1 x rear slope 5 pairs of lashing pockets recessed in the outer frame, 70 x 40 mm inside, (convertible to 5-ton ring tie-down eyes, not included in the scope of supply) Coupling device for trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical Axle load equalization (rocker equalization) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake including 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable, Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17.5 at the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front Nlodpfx Alei Riy Ejhjc 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connection cable, 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Front area with steel floor, then with 70 mm softwood floor, in the wheel arch area steel / tread plate covering Rear slope with 70 mm softwood floor Low-bed platform including rear slope 8,200 mm Ramps Steel ramps 2800 mm long, 750 mm wide, laterally movable covered with wood including with spring-loaded support Operating instructions An exemption permit is required for a 10,000 kg axle load; only indivisible loads are possible!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of registration / signs Country of registration: Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Drawbar galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images! Customized transport solution Configure your Flieg

Year of construction: 1994, condition: used, functionality: fully functional, Plastic granulator with feed conveyor and dedusting system Nedpfx Aowtfavslhjlc The CONDUX plastic granulator CS 300/300-S-II is a reliable solution for the size reduction and granulation of plastics. Equipped with an integrated feed conveyor and dedusting system, it ensures continuous processing in a clean working environment. Its robust design guarantees durability and consistent performance, making it ideal for recycling and recovery processes.

Condition: as good as new (ex-display), Year of construction: 2020, Grinding wheel for gear grinding, module - 3.74. also can regrinding for another module. Nlodpfx Aleq Nmkxohec

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,051 h, machine/vehicle number: 281178, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Panasonic, controller model: MAZATROL PREVIEW 3, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 4,051 h, laser power: 6,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 3,150 mm, table width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 110 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 60 m/min, cutting speed: 120 mm/min, positioning speed: 170 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, type of input current: three-phase, type of cooling: water, overall weight: 15,500 kg, total length: 10,750 mm, total width: 5,000 mm, total height: 2,010 mm, Equipment: CE marking, USB port, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, type plate available, We offer a used 6kW Fiber laser cutting machine, Mazak OPTIPLEX 3015 FIBER II, manufactured in 2017. The machine is in very good condition and has been regularly serviced. It is equipped with: - automatic nozzle changer, - autofocus, - beam diameter adjustment, - automatic nozzle calibration, - automatic nozzle cleaning, Nsdezca E Dspfx Alhjlc - intelligent functions: piercing control, material ignition detection (black steel - oxygen assist gas), plasma detection (stainless steel - nitrogen assist gas). The unit is sold with a set of nozzles and protective lenses. A Donaldson DFPRO 4kW dust collector is also included. If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck. ©farmpartner-tec GmbH: UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreaders) Rear cover, stainless steel Nljdpfx Aoyq Ar Aelhec FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Gr.2(M) R=Gr.3 Control system Evolution Professional "EP", including electronic spreader pattern adjustment Premium spreading disc "490" (spreading width 2 - 10 m) Ball-point frame for Unimog 405.125 Support legs (4 pcs.), 3 t, crank drive in the center, including lateral supports Rotating beacon (1 piece) Warning film red-white, at the top of the container Marking "Winter Service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow measurement with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, empty load weight: 5,740 kg, maximum load weight: 24,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2020, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, rotating beacon, 3 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), can be widened to 3m, lashing points, two-part loading ramps, mechanical ramps, extendable drawbar, side aluminum fender, twin tires, EBS. Superstructure: Loading length approx. 8.5m, can be widened to 3.05m. Demo vehicle! Nlsdexbttqjpfx Alhsc Parabolic suspension with axle equalization at the rear, 3x 10t SAF axles, permissible gross vehicle weight 30t possible, drawbar adjustable in length. New vehicle from stock, registered on July 21, 2020. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,05,575 km, power: 95 kW (129.16 HP), first registration: 03/2014, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * 1st hand * Low mileage * 5-ton payload, twin rear wheels (currently downrated to 3.5t) * Extra-long flatbed: 4.30 meters * Trailer hitch with 3-ton towing capacity * Automatic transmission * TÜV valid until 04/2028 * 3-seater Nljdpfx Aljyy Txyohsc Special equipment: Hill start assist, 13-pin trailer socket, 180 A alternator, spare wheel with super single tires (235/65 R16), spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear panel with window, cabin seating: twin passenger bench, reinforced rear stabilizer, reinforced front stabilizer, 95 Ah AGM battery Additional features: Adaptive brake light, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, braking system with ABS + ASR, cabin roof lining, lockable glove compartment, standard flatbed body, main fuel tank 75 liters, headlight range adjustment, truck registration, model update, engine: 2.1 l – 95 kW CDI CAT (2143 cc), wheelbase: 4325 mm, smoker package, low emissions according to Euro 6 standard, driver's seatbelt with warning system, seat trim/upholstery: Lima fabric, adjustable passenger seat, ASSYST maintenance interval indicator, heat-insulating glass, permissible GVW: 5.0 t, twin rear wheels on 2nd/rear axle.

Condition: used, mileage: 1,05,575 km, power: 95 kW (129.16 HP), first registration: 03/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * 1st hand * Low mileage Nledjyy Tx Hspfx Alhsc * 5-ton twin rear wheels (currently downgraded to 3.5 t GVW) * Maxi long flatbed: 4.30 meters * Tow bar: 3-ton towing capacity * Automatic transmission * TÜV valid until 04/2028 * 3-seater Special features: Hill Start Assist, 13-pin trailer socket, 180 A alternator, spare wheel with super single tire (235/65 R16), spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear panel with window, double passenger seat in cab, rear stabilizer, heavy-duty front stabilizer, 95 Ah AGM battery Additional equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, braking system with ABS+ASR, cab roof liner, lockable glove compartment, body type: standard dropside, main fuel tank: 75 liters, headlight leveling control, truck registration, model update, engine: 2.1 L - 95 kW CDI CAT (2143 cc), wheelbase: 4,325 mm, smoker's package, low emissions in compliance with Euro 6, driver’s seatbelt with warning system, upholstery: Lima fabric, adjustable passenger seat in cab, ASSYST maintenance interval display, heat-insulating glazing, GVWR: 5.00 t, dual tires on 2nd axle/rear axle.

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes Nledpfx Aex Db D Aolhsc - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Tamping Rammer SRV 300-II — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Nedpoy A E Ufofx Alhslc - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,190 plus VAT | EXW Einbeck | Delivery upon request

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235 / 75 R 17,5", tire condition: 100 %, color: black, Low-bed trailer chassis: Steel welded construction, turntable with robust ball bearing, foldable rear support, 2 chocks with holder, aluminum side impact protection, splash guards at the rear covering the entire width (not in conjunction with forklift mount), half-shell wheel arches, 1st axle with anti-spray splash guard, anti-spray splash guards behind the 2nd and 3rd axles, 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock, extendable widening sections to 3,000 mm, storage compartment for wooden planks in the center of the loading area, 70 mm wooden planks for widening to 3,000 mm, lashing points for low-bed trailers, 1 pair of lashing recesses in the front longitudinal beam, recessed in the flange, 10 tons each, 4 pairs of lashing holes in the outer frame, 5 tons each (for strap attachment), 7 pairs of lashing eyes recessed in the top and side of the outer frame, 10 tons each, 1 at the front in the flange, 6 in the low bed, the first lashing point 250 mm from the front and the last max. 250 mm from the rear, distance between lashing points not greater than 1100 mm, 5 pairs of ring lashing points recessed in the outer frame, 5 tons each (convertible to pocket lashing points), 2 pairs of folding lashing points additionally, 10 tons each, 1 on the flange (protruding), 1 behind the last axle recessed in the floor, 1 pair of screw lashing points, 6.7 tons each (JDT), with large flange plate including thread as counter-holder, at the front on the flange. Trailer turntable hitch: Drawbar with tested 40 mm drawbar eye, parking sockets for electrical/ABS and air connections on the drawbar. Axles + Suspension: SAF drum brake axles, "axle/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension with lift and lower valve, operable separately at the front and rear. Wheels and Tires: 235 / 75 R 17.5", Fulda, rims: 6 x steel rims in twin arrangement, mounted on the inside; 6 x aluminum rims, polished, mounted on the outside. Braking System: 2-line compressed air braking system, spring brake parking brake, Trailer Info Center for displaying vehicle data such as axle load (not an approved scale) and odometer, vehicle stability system, axle load detection via EBS-Canbus signal for display on the dashboard in the cab, truck must be appropriately pre-equipped, 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit, EBS, electronic braking system with EBS plug at the front, with connection cable. Electrical System: 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED, manufacturer Aspöck EcoLED 2 with dynamic turn signal, premium LED side marker lights, 2 white position lights at the front in LED, 2 white/red marker lights at the rear in LED, 2 x 7-pole non-interchangeable plugs at the front, with connection cable, additional LED work light at the rear, 1 LED rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED-illuminated and extendable to 3,000 mm. Floor: Front flange with steel/diamond plate covering, storage box recessed in the ramp to the flange, followed by a 70 mm larch wood floor, steel/diamond plate covering in the wheel arch area, rear slope with 70 mm larch wood floor, low-bed area including rear slope 6,500 mm, loading ramps, steel ramps 2,800 mm long, 750 mm wide, laterally displaceable, additional ramp locking device, foldable at the bottom (to prevent lateral slippage o Nledpjzaznzefx Alhec