Used Faccin 4Hel-2122 for sale (57)

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Iodpsy Atwbefx An Djar Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: new, neu ca. 2 Wochen ab Auftragse Iaedpfx Anoypbp Rj Djr Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Iasdpfx Asd Eqg Hsn Dsr Optional equipment included: CNC control PGS-ABSOLUTE

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t Iajdpfx Ansytr Rmo Dsr The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height 11000 mm Weight 178000 kg Iaodpjkvm Nfjfx An Djr Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Iaodpfjiink Ssx An Dsr Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Iasdpox Dtt Aofx An Dsr Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Iaodpfxsx Iitie An Djr Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Year of construction: 2002, condition: excellent (used), Technical data: working width: 3550 mm max. bending capacity: 42,0 mm max. bending: 35,0 mm CNC control diameter upper roller: 480 mm diameter 2nd top roller: 540 mm diameter lateral side rollers: 480 mm diameter middle bottom roller: 480 mm conical bending device by inclination of the two side rollers mobile control panel with digital display hydraulic folding bearings own weight: approx. 44 tons additional equipment: lateral bending aid swiveling bending aid on top Iedpfxeittzfj An Dsar additional top roller The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Iaodpogd T R Defx An Dsr Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Iasdpfx Ajwayt Ren Dor Quick bending roll configuration change system (TIMS Technology) Side guide rollers adjustable in 6 directions with fully hydraulic controls Steplessly adjustable rotation speed and simultaneous shaft movements Operating switches on a centrally movable control panel

Condition: ready for operation (used), Faccin profile bending machine Iaodpfx Asy Abz Usn Djr

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Iedpfx Anjyrq Dvs Dear Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 1998, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 380 mm, side roll diameter: 340 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,000 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,600 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, Plate roll FW model HAV 3100X16-30 variable geometry 3-roll plate bending machine capacity 3000 x 30 mm Year of make 1998 Used machine in working condition Ijdpfx Ansydiq Ss Dsar Top roll 380 mm Side rolls 340 mm Rolls surface length 3100 mm Capacity bending Plate width 3000 mm Plate thickness 30 mm Prebend 16 mm minimum rolling diameter starting from ID 450 mm and above -configuration -machine fully hydraulic operated -variable geometry of the 3 rolls with pinch prebend -hardened surface of the 3 rolls Rerolling system for calibration of welded plates Front open drop-end to unload the closed shell -Side arm hydraulic swing-down to align the plate in the rolls -hydraulic driven rotation of the upper roll with braking system Control console centralized electric with digital position readout Electric motor power 22Kw installed on hydraulic unit Voltage 3 phase 380/50 Safety and emergency stop installed Manuals operation and service original the machine Machine weight 15ton overall dimension cm 550 x 150 x H160 cm

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm Isdpfxjgurb Hs An Dear 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Iodpfx Aeq A Un Ssn Dear

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Iasdpsc S N Risfx An Dor Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Iaedpfx Aoc S N Nqon Djr Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Isdpfxjcuxp To An Dear Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Iedpfx Anscuxpqs Djar Machine with CE certification and documentation

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Iodpfx Aewwt Ddon Djar Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Iasdpfx Anjiivhdj Dor Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Iodsiivgrepfx An Dsar Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Ijdpfxeiivg Se An Djar Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Isdpfxoiivc Do An Djar Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification