Used Gardner Denver V-Vc 75 for sale (37,756)

Condition: ready for operation (used), Year of construction: 2012, Technical data: Product number: V-VC 75 Nsdpsy H Swnsfx Aqvolb Year of manufacture: 2012 Motor power: 2.2 kW Capacity: 84 m³/h MAX vacuum: 0.2 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 90 kg Dimensions [H x L x W]: 6011 x 281 x 310 mm The pump achieves a vacuum of 0.2 mbar, as confirmed by the sensor measurement shown in the attached video below. A display reading of 2.8 -1 on the sensor means a vacuum of 2.8 x 10⁻¹, which equals 0.28 mbar. After full overhaul/major service The pump is in perfect condition - New oil - New exhaust separators Oil-lubricated vacuum pump, suction unit – a device used in vacuum technology for removing gases (creating a vacuum) in a closed space. Pumps are classified based on their operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: - Ultimate pressure (lowest pressure the pump can achieve), - Pumping speed and its dependency on pressure, - Capacity (usually measured in m³ of evacuated gas per unit of time).

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Nsdoq S N Iispfx Aqvolb Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: used, Year of construction: 2007, functionality: fully functional, volume flow: 300 m³/h, final pressure: 0.5 bar, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,720 rpm, We offer this used Gardner Denver VC 300 (01) vacuum pump, year 2007. Nledpoy Id I Ujfx Aqvjb BOTH PUMPS – SOLD AS A SET Vacuum range: 0.5/10 mbar (abs.) Capacity: 300/360 m³/h Power (S1): 7.5/9 kW Speed: 1450/1720 rpm Serial number: 2711829 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h Nsdpfx Ael U E Twsqvelb -Drive: 3 kW Overall dimensions: 710/400/H290 mm -Weight: 92 kg

Condition: used, Kompressor / Compressor Gardner Denver SKG-275.2V.02 (60) Seitenkanalverdichter Baujahr / Year 2007 - SN. 2750748 Luftstrom / Capacity 100 m3/h SI 1,5/1,8 kW / 2800/3400min Überholt 2014 / Overhauld 2014 Nlsdpew Nbikofx Aqvjb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers Nledpfx Aqev Suhzjvsb 1400 bar 35 ltr/min IL 375 TF375H

Condition: excellent (used), Year of construction: 2018, volume flow: 2.15 m³/h, operating pressure: 13 bar, pressure: 13 bar, GARDNER DENVER KBV 18 screw compressor Engine 18.5 kw Capacity 2.15 m3/min Pressure 13 bar Year of production 2018 Nljdpfx Aqevxtxrevob The compressor is fully functional.

Condition: used, Year of construction: 2012, operating hours: 64,000 h, functionality: limited functionality, machine/vehicle number: BA27450001, Gardner Denver VS40 screw compressor in good condition, well maintained. Currently disconnected and stored in a warehouse. Nljdpjxxap Hefx Aqvsb

Condition: used, Year of construction: 2007, Gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW Manufacture: Gardner Denver Type: VLT 40 (01) Year of manufacture: 2007 Total: 1.5 kW Speed: 1420 r/min Weight: 52 kg Air delivery: 42/50 m3/h Max vacuum: 150 mbar IP55 Nlodpsufiq Ejfx Aqvob

Condition: good (used), Year of construction: 2000, MANUFACTURER: GARDNER DENVER MODEL: ES75-10 EANA SERIAL NO.: 09990211 Njdpfx Aqsyi Emgovelb YEAR: 2000 POWER (kW): 75 CAPACITY (m3/min): 10.7 PRESSURE (bar): 10

Condition: good (used), Gardner Denver S-VSI 100 Vacuum Pump Dry-running, non-contact screw vacuum pumps Easy maintenance. Suitable for industrial applications such as vacuum forming, metallurgy, and surface treatment. High efficiency thanks to stepped screw profile. Technical specifications: Maximum suction capacity m3/h: 100 at 50 Hz // 138 at 60 Hz Ultimate pressure mbar (abs.) 0.1 Nlsdsk Sgvcepfx Aqveb Rated voltage 50 Hz/60 Hz: 230/400 V ± 10% / 220/380 V Motor power 50 Hz/60 Hz: 3 / 3.6 kW Current consumption 50 Hz/60 Hz: 10.5 / 6.0 Min. speed 50 Hz/60 Hz: 2880 / 3550 Weight: 190 kg Cooling water consumption: 1.8 l/min Operating hours: Between 321 - 14613 h Approximately 80% of the pumps have fewer than 4,000 operating hours. Since we have approximately 40 of these pumps, we ship them randomly. 1x Gardner Denver S-VSI 100 vacuum pump Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, operating hours: 1,980 h, * Stationary Compressor * Type DLT1303 * 4-cylinder diesel engine * 12 bar Nledpoxmqtlofx Aqvsb * 11.5 m3/min * Speed: 2200 rpm * 119 kW ----Internal vehicle number 11327-----Subject to errors and prior sale WhatsApp support available! If you have any questions about the unit or need further information, feel free to contact us conveniently via WhatsApp.

Condition: good (used), Manufacturer: GARDNER DENVER Type: G200 2 BH 1900 -7AH17 Electric power: 12.5 kW RPM: 2920/minute at 50Hz Nledpef H A Dxjfx Aqvjb Pmin: 280 mbar

Condition: excellent (used), Year of construction: 2016, GARDNER DENVER ksa45 Screw Compressor Technical Data: Capacity: 6.82 m3/min; Motor power: 45 kW; Max pressure: 10 bar; Operating hours: 2820 h Year: 2016; Compressor fully functional; Net price: 16,500 PLN Nlsdsw Nimqjpfx Aqvjb Gross price: 20,295 PLN

Condition: excellent (used), Year of construction: 2011, GARDNER DENVER KSA18 screw compressor, machine mounted on a 500L tank, after service Nlodew Niltjpfx Aqvob Technical specifications: capacity: 2.50 m3/min; motor power: 18.5 KW; maximum pressure: 10 bar; operating hours: 12,632 h year: 2011; compressor fully functional; net price: 10,500 PLN gross price: 12,915 PLN Below is a link to the video.

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Delivery rate: 0.67 m³/h Nedjy Amknjpfx Aqvolb Refrigeration dryer PT 9

Condition: used, Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Nsdpfx Aevkx Rqoqvelb On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kompressor von Gardner Denver, gereinigt und getestet. Compressor of Gardner Denver, cleaned and tested. Nsdpfxjxg Inaj Aqvolb Kompressor / Compressor Gardner Denver KLT 15 (03) Baujahr / Year 2007- SN. 2740657 Luftstrom / Capacity 15/18 m3/h S1 0,75/0,9 kW / 1400/1710 /min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2019, volume flow: 0.97 m³/h, operating pressure: 10 bar, pressure: 10 bar, GARDNER DENVER CHAMPION FM 07 screw compressor Motor 7.5 kW Nljdpsw D S Rcofx Aqvsb Capacity 0.97 m3/min Pressure 10 bar Year of manufacture 2019 Compressor is fully operational.

Condition: good (used), Year of construction: 2005, Gardner Denver ES 22-10 Air Compressor with Pressure Air Receiver Tank. Manufacturer: Gardner Denver Model: ES 22-10 Compressor type: Rotary screw compressor Year of manufacture: 2005 Maximum pressure: 10 bar Motor power: 22 kW Rotational speed: 2780 rpm Weight: 628 kg Electrical supply: 400 V / 50 Hz CE marked Air Receiver Tank Manufacturer: Galvanoimis Oy Location: Pirkkala, Finland Year of manufacture: 2005 Tank specifications (according to nameplate): Maximum allowable working pressure: 10 bar Test pressure: 14.3 bar Volume: 1800 liters Maximum internal temperature: +50 °C Minimum internal temperature: −40 °C CE marked General Good maintenance and service history Air dryer included. 2 similar sets available. Nledex Tctgspfx Aqvsb Industrial compressor package suitable for workshop or production use. Compressor and tanks manufactured in Finland. 📩 Contact for availability and delivery options.

Condition: like new (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DD10059787001, overall weight: 4,000 kg, total length: 2,500 mm, total width: 1,400 mm, total height: 2,000 mm, power: 132 kW (179.47 HP), pressure (max.): 13 bar, type of cooling: air, New frequency-controlled machine with heat recovery. Conversion because the air requirement is no longer met. Nljdpfx Aqjwhu U Eeveb

Condition: used, functionality: unexamined, machine/vehicle number: G-BH7, Used Gardner Denver G-BH7 Vacuum Blower Manufacturer: Gardner Denver / Elmo Rietschle Model: G-BH7 2BH7320-OAH56 Nlodpsw H Rgbefx Aqvob Side channel blower / Vacuum blower / Vacuum compressor Power: 50/60 Hz, 1.5 kW, 200/240/345/415 volt Capacity: 2850/min | 3460/min

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property Nlodpjyc Ewxefx Aqvjb - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Nsdpov Rr Hxsfx Aqvslb Chip conveyor Automation / Robot

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) Nodpfx Aqsyifm Dsvolb • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Taper Size SK 40