Used Hans Weber Maschinenfabrik Ds-85 for sale (8,899)

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Fsdpfoyx Dw Dsx Ag Aogc Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles and pipes Manufacturer: Hans Weber Maschinenfabrik GmbH Model: PS-2 Year of manufacture: 2002 Serial no.: PS 2 104 Technical specifications: Profile dimensions: Width: 200 mm Height: 100 mm Pipe diameter: max. 100 mm Shortest cutting cycle: approx. 6 sec. Carriage travel: max. 400 mm Cutting speed: approx. 60 m/sec. Clamping force: up to 1100 N (adjustable) Saw blade diameter: 400 mm Dimensions: 1830 x 1000 x 1600 mm (LxWxH) Weight: approx. 500 kg Condition: used, as seen Accessories: New maintenance unit for compressed air New incremental encoder, incl. measuring wheel and connection cable for length measurement Note: Fsdpfx Asy Ulhieg Aegc The saw was in use at an education and research centre and therefore has very few operating hours.

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Fodet Rcn Nepfx Ag Aogc Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: good (used), TWIN SCREWS for WEBER DS105.17D EXTRUDER Fedpsywr Tdjfx Ag Aogc Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Fgedpfx Aox Apcksg Aoc

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs Fgodeyx Dwkopfx Ag Aoc - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request. Fsdpst H Rrzefx Ag Aogc

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Fgodpfevuzqzox Ag Aoc Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: like new (used), Extruder pants pieces for Weber DS 10.22 Fgsdpfx Aohlvm Nsg Aec

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Fodpevryhysfx Ag Aegc Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Fedpsl Hx Adefx Ag Asgc

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Fodpfxeua E H So Ag Asgc - Suitable for single wall pipes up to 220mm

Year of construction: 1999, condition: used, Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 85 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg Fedpok D Nutjfx Ag Aogc

Year of construction: 2020, condition: new, Double-sided mitre stop Year of manufacture: 2020 For fast and stepless production of mitre cuts on narrow and short workpieces at any angle from 0° to 90° For crosscuts up to 1375 mm Easy handling and quick installation on the saw's roller carriage Suitable for Panhans models 680_10_20 Fgjdskwhaljpfx Ag Aoc Conversion kit for other models available on request Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1975, Panhans sliding table saw IDL000791 - manufacturer: Panhans - model: 685 Fodjukgyiopfx Ag Asgc - year: 1975 - working condition

Year of construction: 2019, operating hours: 373 h, condition: used, lifting height: 4,000 mm, mast type: simplex, construction height: 3,350 mm, fork length: 2,500 mm, drive type: Diesel, load capacity: 10,000 kg, Heavy-duty forklift truck - Diesel Load center: 600 Fork width: 170 mm Fork thickness: 95 mm ISO Class: Pin-Type Mast type: Standard Condition: As good as new Technical condition: New Front tires type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Fgjdjt Dd Taopfx Ag Aoc Sideshift, fork positioner, ( opening range AK - AK = 440 mm to 1,950 mm ) 3rd valve, 4th valve, Full cab with heating complete lighting system

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 627 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,770 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,199 kg, drive type: Diesel, construction width: 1,235 mm, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Non Marking Fgjdot Dd Nhopfx Ag Asc Front tires Size: 28 x 9 - 15 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 6.50 - 10 Rear tires Condition: 80 - 100% Description: Full cab with heating, 3rd valve to fork carriage, 4th valve available, front lighting, rotating beacon, hand lever load protection grille, sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, load protection grille, soot filter, full cab, non-creeping tires, interior mirror, rotating beacon, windscreen wiper, seat,

Year of construction: 2019, operating hours: 11 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 4,800 mm, free lift: 1,565 mm, mast type: triplex, construction height: 2,365 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,500 kg, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: New machine Technical condition: New Fgedpfot Eldijx Ag Ajc Front tires type: Superelastic Front tires Size: 28 x 9 - 15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50 - 10 Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Integrated hydraulic sideshift Full cab with heating 2 x working lights front, 1 x rear

Year of construction: 2019, operating hours: 11 h, condition: used, lifting height: 4,800 mm, free lift: 1,565 mm, mast type: triplex, construction height: 2,365 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,500 kg, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: 28 x 9 - 15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 6.50 - 10 Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Integrated hydraulic sideshift Full cab with heating 2 x working lights front, 1 x rear Fgsdpfx Aget Dd R So Ajc

Year of construction: 2019, operating hours: 499 h, condition: used, functionality: fully functional, empty load weight: 13,430 kg, fuel type: diesel, total length: 4,200 mm, lifting height: 4,000 mm, free lift: 200 mm, mast type: simplex, construction height: 3,350 mm, fork length: 2,500 mm, fork carriage width: 1,950 mm, drive type: Diesel, load capacity: 10,000 kg, construction width: 2,200 mm, Heavy-duty forklift truck - Diesel Load center: 600 Fork width: 170 mm Fork thickness: 95 mm ISO Class: Pin-Type Fjdpeuhi Dwsfx Ag Aegc Mast type: Standard Transmission: Hydrodynamic Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Superelastic Front tires Size: 9.00-20 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: 9.00-20 Rear tires Condition: 80 - 100% Sideshift, fork positioner, ( opening range AK - AK = 440 mm to 1,950 mm ) 3rd valve, 4th valve, Full cab with heating complete lighting system

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush Fedpfxsgm Tqwj Ag Ajgc smooth regulation of feed speed weight of the machine: 2700 kg

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board SN:YUY666-2544, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fgsdox Erh Repfx Ag Aoc

Condition: ready for operation (used), Indramat DDS03.2-W050-B Controller SN 268533-08038, used, good condition, 100% functional, scope of delivery as per photos Fgedpfx Agek Uzafs Aoc

Condition: ready for operation (used), Indramat DDS03.2-W030-B digital A.C. servo controller, SN: 268532-07748, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgsdex Etw Hopfx Ag Aoc

Condition: ready for operation (used), Rexroth DDS03.2-W030-BE12-01-FW controller, MNR: R911265358 SN:268532-06490. The controller has been factory overhauled by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fsdjx Dw Spopfx Ag Aegc