Used Innova 2300 Benchtop Open Air Shaker for sale (30,304)

Condition: used, This listing is for a Innova 2300 Benchtop Open Air Shaker For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study. Ppodpfxjxzg Ize Aguot

Condition: good (used), Model No. SHKA3000 The machine runs on 120V! If necessary we will provide a voltage converter. Width (inch/cm) 29.4 in (74.7 cm) Height (inch/cm) 9.7 in (24.6 cm) Length (inch/cm) 25.8 in (65.5 cm) Weight (lbs/kg) 171 lbs (77.6 kg) Volts (AC) 120 Ppedpfx Ajx R Tvtsguot Amps 1.0 Watts 100 Frequency (Hz) 50/60 Speed 40 to 400 rpm, ±10 rpm Timer Continuous or timed from 1–60 mins Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Psdpfx Agovg U Dxsuopt Supports compliance with occupational health and safety standards, boosting overall operational safety.

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar * Ppodsu Nz Dnepfx Agust

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Pedpfx Agey Spkiouopt Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: used, suitable for nitrogen Ppedpfey Tun Asx Aguot all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: PAM8025B, This membrane Nitrogen Generator was removed by a factory 3 years ago and by that time it was fully functional. Ppsdpfx Ajy R Sixeguet After this is stored.

Condition: used, Year of construction: 2003, functionality: unexamined, This membrane Nitrogen generator was removed from a factory 3 years ago . By the time it was removed it was functional. after this is stored. Ppjdoy R Sg Rspfx Aguot

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 130 kg, total length: 1,100 mm, total width: 450 mm, fuel type: electric, volume flow: 60 m³/h, operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 65 dB, protection type (IP code): IP23, type of cooling: air, Equipment: refrigerant dryer, VIBER-AIR INV7.5-500 – INDUSTRIAL SCREW COMPRESSOR WITH INVERTER AND INTEGRATED DRYER Professional screw compressor designed for continuous industrial use, ideal for carpentry shops, workshops, production facilities, CNC machines, and use with pneumatic tools. The inverter technology enables automatic adjustment of the motor speed based on the actual air consumption, reducing energy consumption, mechanical wear, and noise. The integrated dryer ensures cleaner and drier compressed air, improving the reliability of the system and the lifespan of the connected pneumatic equipment. MAIN FEATURES: • Industrial screw compressor • 7.5 kW motor • 500-liter tank • 400V power supply • Integrated inverter for energy saving • Integrated dryer • Direct drive • Low noise level • Electronic control • Reduced maintenance • High operational reliability Ppsdpfx Aoy Uk Afeguet Ideal for: • Carpentry shops • CNC plants • Mechanical workshops • Manufacturing companies • Continuous professional use

Condition: used, Year of construction: 2001, clamping force: 4,200 kN, opening stroke: 710 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, number of injections: 2, power: 68 kW (92.45 HP), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory can be found at inventar-verkauf.de/id/alesco. In addition, 2 injection molding units are included, one of which was used exclusively for clear glass. Details: Clamping force: 4200 KN Tie bar distance: 800 x 710 mm Mold opening: 710 mm Control system: Ergocontrol NC 4 Connected power: 68 KW Overall dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Wittmann DR 633/CNC 6 - 316 robot (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-cavity core pull 2 E/A (electrical/pneumatic) Embossing function retrofitted 2 x Injection molding unit: Injection molding unit 1 Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection molding unit 2 Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Pjdpjy U Nkbsfx Aguept Injection pressure: 1877 bar WITHOUT KOCH NOZZLE and PLASTICIZER. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Ppodpsy H H Dvsfx Aguot Current: 1.0 A Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Prices are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Condition: excellent (used), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, as well as research and development applications. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Podpfx Ajy Iwp Ssgujpt Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ vibration control system Multi-channel control system Including Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation modes Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, noise soft-clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories per photos Loading possible. Sale without warranty. Subject to prior sale and changes.

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. Ppsdpfxsy Ryrbo Agujt The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: used, Year of construction: 2018, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 160 x 130 x 130 cm - Details: - └ Description: Includes tank and dryer Ppedsyuga Ejpfx Aguot - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg Ppsdpfxsy Nkd Ej Agust net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: No Model year: 2024 Color: Grey Part suitable for: vans Overall condition: good Technical condition: good Visual condition: good Ppedpfey Twu Ejx Agujt

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, 2x used steam boiler installation Fabricate: VIESSMANN Type: M237 026 Year: 2005 Pedpjy Tpm Hofx Aguopt Steamcapacity: 2.300 kg/h Max. pressure: 10 bar CE 0035 Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator. Available as single boiler or package deal.

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 52 kW (70.70 HP), type of cooling: air, overall weight: 580 kg, total width: 1,000 mm, total length: 3,700 mm, total height: 1,400 mm, warranty duration: 6 months, AIR COOLER (GLYCOL) PROFROID EVAP. MI 337 52 KW Cooling capacity: 52 kW / 14.79 tons Year of manufacture: 2010 Fluid: Glycol Distance between lamellas: 7 mm Air flow: 40200 m³/h Number of fans: 3 pcs. Fan Diameter: 762 mm Volume: 92 dm³ External surface: 385 m² Dimensions: 3.7 x 1 x 1.4 m. Weight: 580 kg. CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Podpfjy Ecr Tex Aguopt LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Ppedpfxsy Ickbe Aguot Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabinet with stand Manufacturer: Faster-Air Model: SafeFAST Elite 212 D “Technical data sheet” from the manufacturer: Useful dimensions (mm): WxDxH: 1192x580x740 Overall dimensions (m): WxDxH: 1350x855x1545 Noise level (dbA): -54 Working aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Pjdpfxev Dhyne Aguopt Weight (kg): 195 Electrical data: 230 V – 50 Hz

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min Ppjdpfx Agsgw Dqpsust 9 bar operating pressure KW 30

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Ppodpfx Ajyy U Shegujt Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Delivery rate: 0.67 m³/h Refrigeration dryer PT 9 Psdpjy Amknefx Aguspt

Year of construction: 1990, condition: used, machine/vehicle number: 226794, Air Output: (8 bar) 2,05 m³/min Pressure: 8 bar Motor: 15 kW Ppedpo E E Awsfx Aguet

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility Podpfey Iplfex Aguspt