Used Landreko Sbm-90-13 for sale (19,700)

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 90l / 450 kg Degree of cleaning: SA-3.0 (deep and widespread corrosion) Njdpfjwrzbgex Aqvsct Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 22 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 110 kg The compressed air blasting machines of the SBM series are mobile machines designed for advanced surface treatment with compressed air jets and abrasive media grains. The advantageous conical bottom design facilitates abrasive movement and, combined with the option to use various valve types, makes the abrasives suitable for processing all types of abrasives with spherical, round, and/or angular shapes and any grain size. The blasting units of the SBM series can achieve a surface quality up to class SA-3/SP5 and a capacity of up to 106 m2/h. SBM series sandblasters are equipped with large claw couplings, ensuring quick and safe connections while maintaining high compressed air throughput. The abrasive is loaded via a pneumatically operated rubber membrane - eliminating the need for inefficient screw connections - which makes the SBM series blasting units safer and easier to operate. The blasting device is also equipped with a large inspection valve that allows for quick tank emptying and the possibility of internal inspection. The SBM series blasting machines allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric versions) is intuitive and precise, making it efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an additional option). The tank of the SBM blasting unit has been designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU, based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 30l / 150 kg Cleaning degree: SA-3.0 (deep and extensive corrosion) Air demand: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Working temperature: -20 - 100 °C Cleaning performance: up to 16 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 45 kg The SBM series compressed air blasting systems are mobile machines designed for advanced surface treatment using a compressed air jet and abrasive grains. The beneficial conical bottom design facilitates abrasive movement and the possibility to use different valve designs makes the abrasives suitable for processing all types of abrasives with spherical, round and/or sharp-edged shapes and any grain size. Nodswry R Topfx Aqvjct The blasting systems of the SBM series can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, which ensure quick and safe connection while maintaining high compressed air throughput. The abrasive loading is carried out by a pneumatically operated rubber membrane - without the need for inefficient screw connections - making the SBM series blasting systems safer and easier to operate. The blasting unit is also equipped with a large inspection valve, enabling quick emptying of the tank and the possibility of internal inspection. The blasting machines of the SBM series allow simultaneous operation with one or two working nozzles (depending on the model). The control of the blasting device (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning directly can interrupt the operation of the machine, as required by the latest health and safety regulations (solution available as an additional option). The SBM blasting unit container was designed and manufactured in accordance with the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE-marked.

Year of construction: 2025, condition: new, functionality: fully functional, Hopper capacity: 60l / 300 kg Degree of cleanliness: SA-3.0 (deep and extensive corrosion) Air requirement: 1,000 l/min (for 4.0 mm nozzle) Abrasive valve: FSV Premium Nominal operating pressure: 13 bar Operating temperature: -20 - 100 °C Cleaning performance: up to 19 m2/h Supported nozzle diameters: from 2 to 15 mm Weight: 65 kg The SBM series compressed air blasting machines are mobile devices designed for advanced surface treatment using a stream of compressed air and abrasive media. Thanks to the advantageous conical bottom design to facilitate abrasive movement and the possibility of using various valve types, the machine is suitable for processing all types of abrasives with spherical, rounded, and/or angular shapes and any grain size. The SBM series blasting systems can achieve a surface finish up to class SA-3/SP5 and a capacity of up to 106 m2/h. The sandblasters of the SBM series are equipped with large claw couplings, ensuring quick and secure connections while allowing high compressed air throughput. The abrasive loading is performed by a pneumatically operated rubber membrane—without the need for inefficient screw connections—which makes the SBM series blasting systems safer and easier to use. The blasting unit is also equipped with a large inspection valve that enables quick tank discharge and allows for internal inspection. The SBM series blasting units allow for simultaneous operation with one or two working nozzles (depending on the model). Nsdpewrza Njfx Aqvoct The control of the blasting unit (in pneumatic or electric version) is intuitive and precise and therefore efficient, as the control handle is located at the end of the working line. The undeniable advantage of this solution is that the operator performing the cleaning can interrupt the operation of the machine directly, as required by the latest health and safety regulations (solution available as an optional extra). The SBM blasting unit container was designed and manufactured according to the requirements of the Pressure Equipment Directive 2014/68/EU based on and under the supervision of a design approved by a notified body, and is CE marked.

Condition: new, Technische Daten: Nodpfx Aqofh Tmmovoct Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp end, pipe bend, weld bend, pipe angle -Pipe bends: 90° welding bends, 13 pieces -Type: RP CH WPD 139.7x4 30360 9 pcs. -Type: SF RO EN2 A... 139.7x4 P235 GHTC1 4 pcs. see photos -Price/Sale: complete Ncedpsq N E Rbsfx Aqvot -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/750/H140 mm -Weight: 78 kg with pallet

Condition: new, Ostas 3-roller round bending machine SBM 1070 x 90 Description Asymmetrical 3-roller round bending machine with motorized drive hardened rollers Upper roller can be swivelled out Conical bending device Footswitch Technical details Sheet width: 1070 mm Nodpfxsd Rw Rce Aqvsct Sheet thickness: 2.5 mm Roll length: 1070 mm Roller diameter: 90.0 mm smallest bending diameter: 135.0 mm Engine power: 1.1 kW Dimensions L-W-H: 1350 x 760 x 1250 mm Weight: 350 kg

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Ncsdpfodx R Tfjx Aqvst Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: new, Technical specification: - chamber volume: 1300 litres - Power supply: 230V ~ / 50Hz - Nominal working pressure: up to 10 bar - Cleaning capacity: up to 20 m2 / h - Degree of cleaning: SA-2.0 (deep and extensive corrosion) - Air requirement: 500 l / min (for 4.0 mm nozzle) - Maximum air flow: up to 2,300 l / min - Supported nozzle diameters: from 4 to 10 mm - Grinding valve: Vacuum-BRAGO - Pistol: Vacuum CTR x 2 - Dimensions of the working area: 1 200 x 1240 x 700 mm - Sight glass dimensions: 305 x 610 mm - Work table load: up to 300 kg - Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) - Coating protection: Powder coating - Working temperature: 10 to + 50 degrees Celsius - Shared work table: Yes - Inspection valve: Yes Nsdpfxsft Sqqo Aqvect - Weight: 350 kg The offer includes: - Land Reko SCI-1300-10 Chamber cleaner - Boron carbide nozzle: 4, 5, 6, 7, 8, 9 or 10 mm (optional) - Protection leather gloves - Holder for hanging details - Foot control pedal x 3 - Pneumatic connection - CE Declaration of Conformity - User manual in German language - 24 months warranty for consumers - 24 months guarantee for entrepreneurs

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 Ncjdsd Dc Unspfx Aqvjt - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: used, Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Nodpjk Aa I Nofx Aqvect Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Heidenhain ERA 4800C 5000 R20 A3908 graduation drum ID 533903-73, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Nedpfx Aji Eahbeqvect

Condition: new, A huge stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA 160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. - wheels, shafts and gears - toothed racks - lead screws with nuts - cross slide screws with nuts - electromagnetic clutches and brakes, brush holders - pumps, filters, motors - steady and movable rests Nodpfov R Uauox Aqvoct - tailstock sleeve - tool post - lathe chuck Ask for more.

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Nsdpfx Aoyk Tfysqvjct Model: TP-PLUS -2:90

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos -Quantity: 64 pieces available Price: per set Ncjdpfxswca D Ie Aqvet -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set

Condition: good (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder Ncedpowa Nuwjfx Aqvot -Mounting bracket: Type H7 125.1-150 -Recording: MK5 -Tool: 90° / Ø 130 mm -Dimensions: Ø 130 x 375 mm -Weight: 9 kg

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Ncsdpfx Ajyk H Steqvst Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement Nedpfxsf Axn As Aqvsct - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Ncsdpfxov Ac Tye Aqvot -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Nedpsv Ac Ukofx Aqvect -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: used, Year of construction: 2020, Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Ncodpfsvadkusx Aqvet Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2003, condition: used, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Nedotug S Dopfx Aqvjct For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Nedpfx Aevg Nfqjqvjct middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Nedpfxek Aa Ipe Aqvoct Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 90°-1370-1200-IR2500 -- NEW RA2341 Technical data: Ncsdpfx Aovpmk Asqvjt Frame width (NB): 1370 mm Frame width with Bearing cover: 1490 mm Frame width with Bearing cover and Motor: 1700 mm belt width (GuB): 1300 mm height (BH): 250 mm Inner radius (IR): 2500 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 0.3-1.0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1.5 / S1 Belt: KT 96 new Year of construction: 2020 Height Sideguides: 194 mm Maximum package size 2500x1000mm, 1200x1150mm or 1000x1160mm Motor is not in the photos, will be installed at purchase. Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units Nedpjhk Dfkofx Aqvect safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -