Used Lathe Stanko 1A625 for sale (5,469)

Condition: good (used), Year of construction: 1970, Stock number: 2907 Make: Stanko Year of manufacture: 1970 Type / Model: 1A625 Control: conventional Center distance: 2,000 mm Passage: 70 mm Tip height: 270 mm Kedpfsuzuq Esx Aklona Turning diameter over bed: 520 mm over carriage: 350 mm in the bridge: 540 mm Speed range: 11 to 2,000 rpm Feed rate: Connection: 10 kW Accessories/equipment: fixed and traveling steady rest, 4-fold steel holder; 250 4-jaw chuck; 400 face plate, coolant device, change wheels Condition: good Weight: approx. 3 tons Dimensions: 3,900 x 1,200 x 1,400 mm

Condition: used, Year of construction: 1967, turning diameter over bed 500 mm turning diameter over slide rest 320 mm Kjdpfx Akoxwzdceljna turning length 2100 mm centre height 250 mm spindle bore 60 mm spindle turning speed range 11 - 2000 U/min total power requirement 7,0 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point

Condition: ready for operation (used), Manufacturer: Stanko Year of manufacture: 1967 Machine number: 9543 Type / Model: 1K62 Distance between centers: 1,000 mm Bore: 50 mm Center height: 240 mm Swinging diameter over bed: Over carriage: 480 mm 220 mm Spindle speed range: 12.5 to 2,000 rpm Feed rate, longitudinal: Facing: Power connection: Kedpfx Aozq D Rxokljna Accessories / Equipment: 4-way steel tool holder, 250 mm 3-jaw chuck, faceplate Condition: good Weight: approx. 2.5 t Dimensions: 2,700 x 1,200 x 1,400 mm

Condition: used, Stock no.: 2862 Brand: Stanko Machine serial no.: 654829 Type / Model: 1K62 Centre distance: 1,000 mm Ksdoy E Hktjpfx Aklena Spindle bore: 50 mm Centre height: 240 mm Max. turning diameter over bed: 480 mm over cross slide: 220 mm Spindle speed range: 12.5 to 2,000 rpm Longitudinal feed: Facing: Connection: Accessories/Equipment: 4-way tool post, 250 mm 3-jaw chuck Condition: good Weight: approx. 2.5 t Dimensions: 2,700 x 1,200 x 1,400 mm

Condition: good (used), Year of construction: 1974, Type / model: 16K20 Control: conventional Center distance: 750 mm Passage: 55 mm Kodpfxjvug Dto Akljna Center height: 220 mm Turning diameter over bed: 440 mm Speed range: 12 to 1,600 rpm Feed: Connection: 10 kW Accessories/equipment: Condition: good Weight: approx. 2.4 t Dimensions: 2,600 x 1,200 x 1,700 mm

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Grinding capacity 630 x 200 mm Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Kedpfxow R Dnxo Akljna Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm

Condition: ready for operation (used), Table diameter: 2250mm Kodpeyxb I Tjfx Aklena Max. swing diameter: 2500mm Max. workpiece height: 1600mm

Condition: excellent (used), Year of construction: 1983, Table diameter: 1000mm Maximum working diameter: 1250mm Module: 12 Knodpfjzqkizex Aklja Maximum stroke: 200mm ALL BEARINGS HAVE BEEN CHANGED WITH NEW

Condition: excellent (used), Year of construction: 1985, Stroke: 320mm Table dimensions: 630mm Kodpjzqm Nksfx Aklona Largest rotation angle: 10° Year of manufacture: 1985

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Knodpfxjvm Dzao Aklja Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working Kedpjyy A Dxjfx Aklena area.

Condition: good (used), Manufactured by: Stanko Tilt table Table size: 560 x 560 mm Design: 400 mm Knodpfx Ajv S Ukvsklea Maximum cutting height: 240 mm Belt length: 3150 mm Adjustable speed

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Kodpfxjzvrn No Aklona

Condition: used, total height: 2,150 mm, total length: 1,900 mm, total width: 1,600 mm, Colour: Green Empty weight: 2.200 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 14299 - Drive system: Conventional - Power [kW]: 3.6 - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 320 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 560 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 250 - Max. grinding wheel thickness [mm]: 50 - Transport dimensions: 1900mm x 1600mm x 2150mm (l x w x h) - Transport weight [kg]: 2200kg - Transport packages [pcs.]: 1 Financial information Kodpjzat I Hefx Aklsna VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and Kedpfx Aou N D Rqokljna hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: good (used), Year of construction: 1973, functionality: fully functional, pressing force: 1,250 t, stroke length: 220 mm, table width: 260 mm, table length: 820 mm, throat depth: 700 mm, total length: 6,400 mm, total width: 4,365 mm, total height: 3,760 mm, overall weight: 1,35,000 kg, operating pressure: 7 bar, pressure: 7 bar, Upset slide nominal force: 12 500 kN /1 250 ton/ Maximal diameter of work piece: 140 mm Maximal diameter of upset flange: 180 mm Upset slide stroke: 460 mm Slide continuous idle strokes in minute: 35 Electric motor power: 75 kW Overall dimensions: - L-R: 6 400 mm - F-B: 4 3650 mm Kjdpfouby N Dsx Akljna - Height: 3 760 mm Total weight, circa: 135 000 kg.

Condition: excellent (used), spherical roller bearing Knodpfob A Iq Sox Aklsa -Bearing type: Spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm -Weight: 7.5 kg

Condition: used, Year of construction: 1987, faceplate diameter 2200 mm swing diameter 2500 mm turning height 1600 mm Control Siemens slide adjustment 1100 mm total power requirement 100 kW weight of the machine ca. 35 t vertical lathe with two RAM; faceplate Ø 2000 mm; SPS supported control for storable cycles; RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling; Chip conveyor / spindle Z-axis as new The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Kedpfjyqty Dex Aklona Your Markus Hirsch Team

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm Kodpfxsxdmgvj Aklsna We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Steel holder inserts Make Stanko/Sedin Data, see pictures Knjdpfxjvmf Axs Akloa

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm Ksdpfx Aou Niu Ujklsna dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. *

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm Kedpfsu Ng Avex Aklona distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Documentation i.D. *

Condition: used, Technical details: weight: 150 kg dimensions: L:280 x B:240 x H:180 / pro Pratze mm Kodpfju N E Azex Aklena These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping stroke 250mm Foot mounting: Surface L x W: 280 x 240mm, 4x clamping screw M24 Equipment 4x slotted screw per clamping claw and socket spanner for square 24mm *

Condition: used, total height: 2,000 mm, total length: 1,900 mm, total width: 1,700 mm, Empty weight: 1.500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 12389 - Drive system: Conventional - X-axis travel [mm]: 670 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 400 - Table width [mm]: 800 - Table depth [mm]: 200 - Magnet width [mm]: 630 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 240 - Transport dimensions: 1900mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg Kedpewh Npkofx Aklona - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Ksdpjvkuaujfx Aklsna Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. For further information see data sheets.