Used Llc Evolutioner Roll Forming Machine for sale (71,122)

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Fgjdpfxjxghngo Adref Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2024, Soffit panel roll forming line was designed by our company to produce wall soffit panels with different lengths. Line has automatic system so you can put length of panels and numbers you need and machine will produce it in automatic mode and cut it automatically. Machine has special cutting shear to cut panels as well. Line can be equipped with manual or automatic decoiler as an option. So it can be effective solution for soffit panels production Fjdporqg U Djfx Adrogf

Condition: new, functionality: fully functional, Fiber Laser Cutting Machine for Sheet Metal – Different Sizes & Laser Powers Description Industrial CNC fiber laser cutting machine for high-speed and precise cutting of sheet metal. Suitable for general metal fabrication as well as production of HVAC components, ventilation parts, electrical cabinets, machine enclosures, brackets, roofing and facade elements and other sheet metal products. The machine can be configured individually according to the customer's required working area, material type and cutting thickness. Suitable materials: Carbon / mild steel Stainless steel Galvanized steel Aluminum Brass Copper Standard configuration example Working area: 1500 × 3000 mm Laser power: 1500 W Cutting thickness: approx. 0.5–10 mm, depending on material and cutting conditions Positioning accuracy: up to ±0.01 mm Max. idle speed: 80–110 m/min Acceleration: up to 1G Cooling: water cooling Cutting gases: oxygen / nitrogen / compressed air Power supply: 380 V, 3 Ph, 50/60 Hz File formats: DXF, PLT, AI, NC and others Other working areas and laser powers available Depending on the production task, machines can be supplied with different working areas, including: 1300 × 2500 mm 1500 × 3000 mm 1500 × 4000 mm 1500 × 6000 mm 2000 × 6000 mm 2500 × 6000 mm 2500 × 12000 mm 2500 × 14000 mm Available laser powers include approximately: 1.5 / 2 / 3 / 6 / 8 / 12 / 20 / 30 / 60 kW, depending on machine configuration. The catalogue includes large-format systems up to 2500 × 14000 mm and laser sources up to 60 kW. Fedpeztx Epofx Adrogf Higher laser power allows processing of thicker material and/or significantly increases cutting speed on thinner sheet. The required laser power is selected according to steel grade, maximum thickness, required cutting speed and cutting gas. Available configurations Open single working table Exchange table Fully enclosed machine Large-format cutting machine Automatic loading/unloading Dust and fume extraction Automatic lubrication Different laser powers and table dimensions Applications Ideal for sheet metal processing, HVAC and ventilation production, steel fabrication, machinery manufacturing, electrical enclosures, construction components, metal furniture, roofing and facade production. The machine can be integrated with press brakes, guillotines, roll forming machines and other sheet metal processing equipment. SEO Keywords fiber laser cutting machine, CNC laser cutter, sheet metal laser cutting machine, metal laser cutter, steel laser cutting machine, fiber laser 1500W, 3000W laser cutter, 6000W fiber laser, 12000W laser cutting machine, high power fiber laser, large format laser cutting machine, sheet metal cutting machine, CNC metal cutting machine, industrial laser cutter, galvanized steel laser cutting, stainless steel laser cutter, HVAC laser cutting machine, metal fabrication equipment, 1500x3000 laser cutter, 2000x6000 laser machine, 2500x12000 laser cutter.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Fgsdpeztwx Ujfx Adrsf Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; Fgedpfxozrnxcj Adref rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. Fsdpfx Adjn Hqmmersgf So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Fjdpouzv Tzefx Adregf Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Fgjdeiuz T Ijpfx Adrof Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Fgjdpfxev T Uvzs Adref Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Fedorklxvjpfx Adrsgf Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. Fgsdpolwt Adjfx Adrjf To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover Fjdpfxjh Aw Rno Adrsgf For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. Fedpfxjm Twnls Adrogf The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Fsdpfohz Twwox Adrsgf Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Fedpfx Adsq U N T Rjregf Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Fgsdpfx Adof Ih Hcerjf Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Fjdpfx Adotp H Ersrjgf Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Fjdpfx Adjzrt Ivsrjgf Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 Fedpfx Ajzqwf Nsdrogf WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS Fjdpfx Adsfgl Aqersgf MADE IN ITALY

Condition: used, 8 STATIONS Fsdpfx Ae Dv I Aedrsgf Technical characteristics: ROLLFORMER 8 STATIONS 400mm WIDTH

Condition: used, Year of construction: 1996, type of input current: three-phase, sheet thickness (max.): 1 mm, total width: 2,000 mm, total length: 20,000 mm, total height: 1,900 mm, shaft diameter: 40 mm, input voltage: 380 V, working width: 300 mm, input current: 40 A, spindle motor power: 15 W, coil weight: 1,500 kg, overall weight: 10,000 kg, We are offering this used Dallan T4R-10-300 punching and profiling line / roll forming machine, manufactured in 1996. Fgjdpfxeztcgqs Adrof Manufacturer: DALLAN Type: T4R-10-300 Serial number: 964310.30 Year of manufacture: 1996 Machine specifications: Sheet width: max. 300 mm Sheet thickness: ± 0.5 – 1.5 mm Number of stations: 16 Number of cassettes: 5 Configuration: Double coil, rolling, punching module, roll forming line (16 stations), flying shear Roller diameter: 40 mm Punching unit: 8 punching units Coil: Double coil (rolls max. 1,500 kg) Current configuration: Omega profiles Dimensions: 20 x 2 x 1.9 meters Weight: ± 10,000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0630, type of input current: three-phase, input voltage: 400 V, coil weight: 6,000 kg, overall weight: 12,000 kg, Machine available immediately. We are offering a new TR32 trapezoidal roll forming machine. The machine is new and ready for collection. Type: TR32 Year of Manufacture: 2026 Serial Number: 0630 Weight: 12,000 kg Maximum power: 12 kW Supply voltage: 3x400 V Fgsdpfx Adezl A I Sorof Supply frequency: (50–60) Hz THE MACHINE INCLUDES: - Electric decoiler with manual tension release, manually operated, capacity Q=6,000 kg; - Sheet metal feed with circular (rotary) knives - Profiling unit - Electromechanical guillotine - 6-meter sheet metal stacker + 6-meter transport cart - Control cabinet - Safety guards If you have any questions or require additional information, please send us a message or call us.

Condition: new, New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts; Hydraulic Roll Opening and Roll Loading Trolley, 10 T Polyethylene Protective Film Coating Unit, Metal Sheet Aligning Unit, Metal RollForm Generating Unit, 18 & 36 Stations According to Form Type, Flying Continuous Length Sizing Shear Unit, Automatic Stacking and Packaging Unit, Automatic Siemens Electric Control Unit. All of our machines have CE MARKING. Please contact us for additional information and technical documents. Fjdpfx Ajf Nqghedrjgf

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) Fgedpfsw Edmfsx Adrsf However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Inspection possible on-site. Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland