used, good condition,
Make Festo
Type UP 65
Machine no. 791616
Motor 7.5 kW
Spindle diameter 40 mm
Clamping height / width 210 mm
Plv7v
Profile depth 65 mm
Table size 700 mm x 360 mm
Lift table
pneumatic
Profile stop
Pneumatic workpiece clamping
Extraction connection 240 mm x 130 mm
Space requirement approx. 1,400 mm x 800 mm x 1,300 mm
Total connected load 7.5 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without ...
- milling length 1400 mm
- max. milling height 120 mm
- max. width 450 mm
-Spindle diameter 30 mm
- spindle speed 8400 / min
- dimensions 4100 x 2000 x 1600 mm
U9iguzjl
- weight without cab 1600 kg
- engines 2x 4 kw
- feed 1-15 m / min
Head machining of posts, boards, laths for tear-free machining.
Ym2ao
with magazine which works itself off automatically
2 milling spindles move independently from the outside to the middle so that there are no tears.
Profile milling machine for grooving cut STROMAB BLOX
The machine is operational, in very good condition, after a review.
TECHNICAL DATA:
- number of spindles 4 pcs
Horizontal 2pcs
- 30mm spindle diameter
- max diameter of the cutter 230mm
- max cutting depth 75mm
- max width of the cutter 150mm
- adjustable spindles up / down
- 2x4kW engine
- number of revolutions 2800 rpm
Vertical 2pcs
Bswujkce
- 30mm spindle diameter
- max diameter of the cutter 170mm
- manually adjustable spindle spaci...
Heavy duty 4 side beam planner GF Brugg (Switzerland)
Number of heads : 7
Head arrangement: 1 down, 2 right, 3 left, 4 right, 5 left, 6 upper, 7 down.
Max. Working wide: 240 mm
Max. Workink high: 200 mm
Feed rate: 5-40 m/min
Total power: 60 kW
2t2jkm
Include milling heads for round beams and blockhaus profile (see picture)
second hand
Make Festo
Type UP 40 ZF
Machine no. 801713
Number of spindles 1
Spindle diameter 40 mm
Clamping width 200 mm
Working width 200 mm
Ufdxebe
Profile depth 40 mm
Milling height 150 mm
Table size 650 mm x 350 mm
Lift table
pneumatic
Stop rail
Profile stop
Pneumatic workpiece clamping
Extraction connection 140 mm
Space requirement approx. 1000 mm x 1000 mm x 1100 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
w...
Catalog number 6331
TECHNICAL DATA
- number of spindles 4 pcs
1) horizontal 2pcs
- 30mm spindle diameter
- max diameter of the cutter 230mm
- max cutting depth 75mm
- max width of the cutter 150mm
- adjustable spindles up / down
- 2x4kW engine
- number of revolutions 2800 rpm
2) vertical 2pcs
- 30mm spindle diameter
- max diameter of the cutter 170mm
- manually adjustable spindle spacing
- 2x4kW engine
- number of revolutions 2800 rpm
- tool movement operated by a pneumatic actuator
- max heigh...
I sell the heavy duty spindle moulder Sicar SFL 1000 SS, year 1998.
Ccuyjq9
with the 4-Rolls Feeder FM8. (8 speeds forward + 8 speeds backward)
Tenoning table height adjustable (possible to set in a straight line with table)
Extra table front
Motor 4kW.
4 Speeds 3500-6500-8000-10000 rpm
Total weight 700kg.
Avialable immediately. Possible to test.
Type PENTHO 2
Moulding unit 545x50 mm
Max. moulding tool 350 mm
engine power 7,5 kW 400V
Table dimensions 500х1030 mm
Automatic feed 4/16 m/min.
Made in Belgium 2007 m./y./г.
Transport dimensions 2700x2200x2100mm
Ytymh0
Weight 1500 kg
Spindel Ø30 mm.
nyttelængde 150 mm.
Frekvensomformer for variabel omdrejninger.
low price EX Works, do to moveing warehouse to another location.
Pvxk9
everything must go before 1/3/22
motor power 11 kW, dimensions WxDxH 1000 x 1200 x 1400 mm, plug 32 A, operating instructions, missing: stop right/left - completely workshop overhauled
tool clamping width 250 mm
milling height 200 mm
milling depth 60 mm
table size 1000 x 410 mm
Bvo93hmpm0
milling spindle-Ø 40 mm
suction nozzle-Ø 160 mm
additional top 120 mm
tool flight circle-Ø 250 mm
space requirement 1000 x 1200 x 1400 mm
Milling spindle speed with tool-Ø 180 mm 6000 rpm.
weight approx. 540 kg
used
manufactured by Bäuerle
type PM 250
built in 1984
Masch.-No. 207/84
GS-approved
motor 11 kW
number of spindles 1
spindle diameter 40 mm
working width 260 mm
profile depth 65 mm
cutting height 200 mm
Mvle90
table size 1000 mm x 410 mm
stroke spindle
workpiece clamping pneumatic
exhaust connection 160 mm
required space ca. 1200 mm x 1200 mm x 1400 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen
CATALOG NUMBER 6056
TECHNICAL DATA
- max height of the processed material 250mm
- working length of the spindle 260mm
- 40mm spindle diameter
- worktop length / width 630x360mm
- guide
- 9.3 kW engine
- 2 material clamps - pneumatic
- diameter of the extraction connector 2x120mm
- air demand 8bar
- dimensions length / width / height 1370x980x1620mm
- weight 450 kg
- unpainted
- cutters included, 2 pcs
- Italian production
- used milling machine, very good condition
Net price: PLN 22900
Net pr...
PP 2-32 / 100 PNEUMATIC DOVETAIL ROUTING MACHINE
Free-standing version with solid cast table and large working surface at a comfortable working height. With four router units which router two work-piece on eachmachine cycle, each with two dovetail slots, for Hoff-mann Key sizes W-1/2/3/4. Finely adjustable router spindle centres from 32 mm to 100 mm.FunctionThe automatic machine cycle is actuated by pressing the foot-pedal. The positioned work-piece is clamped and the units rout to the pre-set d...
COPY SHAPER machine BALESTRINI C70 N . automatic
second hand
full recondition machine
Max. working width mm. 360
Max. working heigth mm. 90
Feed : from 1 to 8 mt./min. ( automatic or pedal variation )
n.02 Router Shaft diam. mm.30
2z2xmivuw
n.02 Router Shaft motor power Hp 5,5 each one
n.01 Hydraulic advance variable speed motor
net weight : kgs. 1100
Professional spindle moulder with iron table and tilting and tapping KUSING SFnc3 1200.
Technical parameters:
Main engine power: 3 kW (4 HP)
Fycmxp0q3
Spindle diameter: ø 30 mm
Spindle length: 140 (120) mm
Spindle stroke: 170 mm
Maximum tool diameter: ø 180 mm
Tool speed: 3000/5000/8000 rpm
The size of iron table: 1020 x 700 mm
Tilt: 0 -45 °
Machine weight: 500 kg
used, good condition
Made by Festo
Type UP 65
Machine no. 781316
Engine 7.5kW
Number of spindles 1
Spindle diameter 40 mm
Clamping height/width 210 mm
Tread depth 65 mm
Table size 700mm x 360mm
Bb2he97c
lifting table
pneumatic
stop rail
profile stop
Pneumatic workpiece clamping
Space requirement approx. 1400 mm x 800 mm x 1300 mm
Total connection value 7.5 kW
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15
cnc-step.com/milling-machine/
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Us...
Pro 623 Manuel Memory System design for easy control and more fast to supply the machine . All engines are standartly 7.5 kw 11 Hp . 0-35 m /min. Optional with 8.000 rpm .
Cclj3dhe
ÖZEN PRO526 - 1.Lower - 2.Right- 3. Left -4. Top - 5. Bottom . Spindle configuration and different configurations are available. It can be optional with 6.000 rpm between 12.000 rpm. Automatic Feeding can be added. Working range is 160mm x 260mm. 0-35 min / speed.
C3qxjsto
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.