Used Mühlböck Wood Drying Machine for sale (67,903)

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Godpfx Asy Uydlel Aoud

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES Gedpfszh Ihvox Al Aoud – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Gsdpfx Alsq Nfuze Asud Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: used, IL 2 control unit for ILSA Multimatic. Gedpfx Alsy Uv Uao Ajud

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg Guedpfx Aleu R Sxxs Ajd - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, Year of construction: 2026, CORMAK DI08 Dry Ice Blasting Machine The CORMAK DI08 is an ultra-portable, light-duty dry ice blasting machine designed for automotive detailers, vehicle service centers, and professional industrial workshops. Thanks to its lightweight construction and compact design, the machine is easy to transport, position in confined spaces, and use on a wide variety of surfaces without the risk of damage. The unit operates with 2.5–3.0 mm dry ice pellets, providing precise and safe cleaning of delicate and technical components. An adjustable dry ice feed rate and controllable blasting pressure allow the cleaning process to be tailored to the type of contamination and the specific surface being treated. KEY FEATURES Ultra-portable design – weighs only 9 kg with compact dimensions of 310 × 190 × 320 mm Compact and easy to use – ideal for workshops, service centers, and field applications Adjustable dry ice feed rate: 0–0.13 kg/min Versatile applications – suitable for cleaning machinery, tools, electronics, industrial equipment, and automotive components Safe and environmentally friendly cleaning method – no chemicals, no water, and no risk of scratching surfaces APPLICATIONS The CORMAK DI08 is ideal for: Automotive and motorcycle detailing Maintenance of industrial machinery and equipment Cleaning molds, tools, and precision components Cleaning electronic circuit boards Preventive maintenance and industrial equipment servicing PACKAGE CONTENTS You receive a brand-new CORMAK DI08 Dry Ice Blasting Machine, ready for operation with dry ice pellets, supplied with: CORMAK DI08 dry ice blasting machine 3 kg dry ice pellet hopper A selection of nozzles in various shapes and sizes for precise adjustment of the blasting stream Gusdpfozht Eajx Al Aed The different nozzle shapes and sizes allow the blasting pattern to be matched to the workpiece and application, increasing the machine's versatility for everyday use. TECHNICAL SPECIFICATIONS Power: 42 W Power Supply: 230 V AC, 50 Hz Compressed Air Consumption: 0–2.0 m³/min Dry Ice Feed Rate: 0–0.13 kg/min (adjustable) Hopper Capacity: 3 kg Weight: 9 kg Dry Ice Type: 2.5–3.0 mm pellets Dimensions (L × W × H): 310 × 190 × 320 mm

Condition: new, Year of construction: 2026, CORMAK DI077 Dry Ice Blasting Machine The CORMAK DI077 is a compact and modern dry ice blasting machine designed for the efficient removal of contaminants from machinery, molds, tools, production equipment, and technical surfaces. It is the ideal solution for businesses looking for an effective, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The greatest advantage of the DI077 is its compact design and exceptional mobility, which clearly distinguish it from many larger and less portable machines available on the market. As a result, it is perfectly suited not only for production facilities but also for maintenance departments, field service operations, on-site work, and any application where easy transportation and quick setup are essential. Guodpfozhtzzex Al Asd The machine operates with 2.5–3.0 mm dry ice pellets and allows precise adjustment of operating parameters to match the type of surface and level of contamination. Adjustable blasting pressure and dry ice feed rate ensure effective cleaning of both delicate components and demanding industrial surfaces. KEY FEATURES Compact design for easy transportation and operation in various locations High mobility and user-friendly operation Effective cleaning without chemicals or water Non-abrasive process that does not damage cleaned surfaces Adjustable blasting pressure Adjustable dry ice feed rate Quick setup and ready-to-use operation Ideal for industrial, maintenance, and technical applications APPLICATIONS The CORMAK DI077 is ideal for: Cleaning industrial machinery and production equipment Removing contamination from molds, tools, and machine components Cleaning metal parts and technical components Maintenance and service operations Cleaning equipment without the need for extensive disassembly Removing grease, carbon deposits, process residues, production contaminants, and other industrial buildup PACKAGE CONTENTS You receive a brand-new CORMAK DI077 Dry Ice Blasting Machine, ready for operation with dry ice pellets, supplied with: CORMAK DI077 dry ice blasting machine A set of nozzles in various shapes and sizes Accessories required for operation according to the supplied configuration The variety of nozzle shapes and sizes allows the blasting stream to be adapted to different workpieces and cleaning conditions, increasing the machine's versatility for everyday use. TECHNICAL SPECIFICATIONS Power: < 500 W Power Supply: 230 V AC, 50 Hz Compressed Air Consumption: 0.8–3.0 m³/min Compressed Air Pressure: 0.1–0.9 MPa (1–9 bar, adjustable) Dry Ice Feed Rate: 0–0.75 kg/min (adjustable) Hopper Capacity: 10 kg Weight: 55 kg Dry Ice Type: 2.5–3.0 mm pellets Drive System: Direct drive Machine Dimensions (L × W × H): 520 × 460 × 960 mm

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t Gedpfx Aljzhcizs Aeud

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 Guodpfxew Tfxdj Al Aod With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Guedpfx Aexc Rmqel Aed Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for machines in prompt delivery we grant you Price List year 2024 -35% OFF . Promotional Sumer 2026 Guedpfxoh U A Uae Al Ajd CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. Gsdpezcrfpofx Al Asud The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control - Automatic dimension reading via laser Gsdpfx Alsy Sfw Ej Ajud

Condition: excellent (used), Balestrini linear milling machine Two milling units Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw Godpfjvt Aynjx Al Aoud

Condition: excellent (used), operating hours: 186 h, overall weight: 110 kg, warranty duration: 12 months, I sell used and new machines for dry ice cleaning. The offered unit is used and comes with a 1-year warranty. The machine has only 186 operating hours. The set includes one nozzle of your choice. Also included are a hose for dry ice blasting and an applicator. There is a hose for compressed air supply. Hose holders and transport straps are included. Gedpfxey Hf Hve Al Aoud

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Guodpfx Aswyda Usl Aed Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), operating hours: 1,360 h, air demand: 4 m³/h, overall weight: 130 kg, type of input current: DC, pressure: 7 bar, input voltage: 230 V, warranty duration: 1 months, Used Cold Jet PCS60 machine for sale. I offer a 1-month warranty. The set includes a dry ice blasting hose, an applicator, 1 nozzle (choice of nozzle), a compressed air supply hose, and brackets and straps for transportation. The machine is in good working order and has been serviced. Guodpfx Aljy Hf Ias Asd

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm Gedpfxoxbh E Uo Al Ajud reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Weight ca. 500 kg

Condition: not inspected (used), Year of construction: 2013, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame lumber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width: approx. 330 mm Passage height: approx. 120 mm Infrared heating elements on the top and bottom Includes outlet conveyor belt, manufacturer: Makor Length: 4000 mm, conveyor belt width: 250 mm Connected load: approx. 55 kW Dimensions: Drying tunnel: approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal: approx. 1200 x 500 x 1100 mm (L x W x H) Gsdpjzhap Esfx Al Ajud Conveyor belt: approx. 4000 x 600 mm (L x W) Total weight: approx. 2200 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Gedpfxszdfhae Al Asud Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gujdpfxjw Hfzas Al Aod Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Guedpfxszgc T Ds Al Aed Please refer to the attached expert report for details on the condition of the item.

Condition: used, Drying machine HENRI PETIT JEAN Eco 600A Gsdpoyvk Scefx Al Asud

Condition: used, TECHNICAL DETAILS Gsdpfsv Eg Ugsx Al Aeud - capacity : 56 [l] - max weight : 80 [kg] - speed : 950 [rpm] - power : 1.5 [kW] - total weight : 265 [kg] - drum size : 500 x 300 [mm] EQUIPMENT - hoist

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Guodpozhbpajfx Al Aod Quick delivery.