Used Müller Weingarten Coil Strip Line for sale (12,777)

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Kjdpfx Aheif Sg Ssaedl Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Kdsdpjhx R Etjfx Ahasl Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive Kodpfx Ahstgvgpeasdl • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 1999, Manufacturer: Müller Weingarten Press Type: HUQ 630.40 Pressing force: 6,300 kN Table area: 4,000 x 1,600 mm Ram area: 4,000 x 1,600 mm Ram stroke: 124-400 mm Ram adjustment: 200 mm Strokes per minute: 10-60 1/min Tool change system: tool change cart Including transfer and ARKU strip feeding line Kdsdpfx Ajy Tp Udjhajl

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. Kdjdpjxvqnbefx Ahaol For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. Kodpfjy Erzdex Ahaedl For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 23 kW (31.27 HP), pressing force: 63 t, table width: 480 mm, table length: 560 mm, ram plate width: 280 mm, ram plate length: 280 mm, total length: 1,800 mm, total width: 1,000 mm, total height: 2,650 mm, overall weight: 4,000 kg, year of last overhaul: 1991, - Fixed stop - Punch damping - Conventional control (contactor) Kjdjy R Sltspfx Ahaedl

Year of construction: 1998, condition: ready for operation (used), A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible. Kjdpey Hk S Refx Ahaedl

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons Kdedpjv Hqnasfx Ahajl KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1971, pressure 100 t Kodpfxjyuttrs Ahaedl passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Kdsdpov Awgusfx Ahasl Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector Kdsdpfotycdkex Ahael - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Kedpfx Asqrqz Aehaodl Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: Kdjdex Ry Hropfx Ahajl • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: good (used), Overall dimensions: 5400 x 1500 x 720 mm Ksdpfx Ahjnqyz Ijasdl Track length: 9000 mm Drive: electric

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Kdjdpfxovkbrqs Ahaol Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Kodsvg Iqxopfx Ahajdl Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher Kodpfx Ahoy Rutysaedl - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 1997, material width 300 mm Kdjdpfx Ahsyx Iknsasl coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Kdsdpfx Ahsyid Nwjaol Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2026, condition: new, Heavy-duty coil slitting line for thick materials with high precision, stable production and industrial performance. Bosporas Machinery is a manufacturer of coil processing lines, delivering high-performance and customized industrial solutions worldwide. This heavy-duty coil slitting line is designed for precise processing of thick gauge materials in demanding industrial applications. Engineered for stable operation, accurate slitting and continuous production, the system is ideal for companies requiring reliable performance with high-capacity coil handling. The line offers a complete turnkey solution from coil loading and decoiling to slitting, recoiling and finished coil output. ⚙️ TECHNICAL RANGE Material Thickness: 3 or 4 mm Coil Width: up to 1500 mm Coil Weight: up to 15 Ton High precision slitting performance Heavy-duty continuous operation capability 🔧 MAIN LINE COMPONENTS Hydraulic Coil Loading Car Hydraulic Decoiler (15 Ton) Infeed Straightener / Pinch Roller System Slitting Head with Precision Knife Adjustment Scrap Winder System Tension & Separator Unit Hydraulic Recoiler Hydraulic Coil Exit Car PLC & HMI Automation System ⚙️ ENGINEERING FEATURES Robust heavy-duty machine construction Precision slitting head with fine knife positioning Stable feeding and tension control system Reliable recoiling performance Servo-supported automation systems User-friendly operator interface Designed for long-term industrial production ⚡ OPERATIONAL ADVANTAGES Ideal for thick and heavy materials High production efficiency Stable and repeatable slit quality Reduced downtime and maintenance needs Turnkey project solution Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Kdedpfx Ahjy Dtxnoasl Heavy sheet metal processors Construction material manufacturers Automotive suppliers Industrial steel component production 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar slitting lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, layout drawings and technical details can be provided upon request.

Year of construction: 2026, condition: new, Complete turnkey production lines for slitting, cut to length, combined slitting-cut to length and press feeding systems. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. We provide complete turnkey coil processing lines designed for modern sheet metal production facilities. Our solutions cover the full process from coil loading and feeding to cutting, recoiling, stacking and automation. Whether for new factory investments, capacity expansion or modernization projects, Bosporas offers reliable, efficient and customized production lines tailored to your material specifications, production targets and factory layout. From standalone machines to fully integrated automatic systems, we deliver complete engineering solutions with international project experience. ⚙️ AVAILABLE SOLUTIONS Coil Slitting Lines: For precise longitudinal cutting of coils into narrower strips with recoiling solutions. Cut to Length Lines: For accurate sheet cutting with stacking systems for flat sheet production. Combined Slitting & Cut to Length Lines: Flexible systems capable of both slitting coils and producing cut sheets in one integrated line. Compact Press Feeding Systems: Integrated decoiler, straightener and servo feeder solutions for press automation and stamping operations. 🔧 LINE CONFIGURATION Depending on the project, production lines may include: Hydraulic Coil Loading Car Decoiler / Uncoiler Systems Straightener / Leveler Units Servo Feeder Systems Kdjdpfx Aoy A Ia Djhasl Slitting Head Rotary / Hydraulic / Mechanical Shear Scrap Winder Systems Tension & Separator Units Recoiler Systems Automatic Stacking Systems Conveyor Systems PLC & HMI Automation Safety Systems & CE Compliance Options ⚙️ ENGINEERING FEATURES Custom machine design according to customer requirements High precision processing performance Heavy-duty machine construction Servo-controlled feeding and automation Modular structure for future upgrades User-friendly control systems Reliable operation for continuous industrial production ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions Single supplier for the full project Reduced labor and production costs High efficiency and consistent product quality Fast installation and commissioning support Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal processing companies Automotive suppliers White goods industry Construction materials production HVAC manufacturers Metal furniture and component production General industrial manufacturing 🧩 OPTIONAL CONFIGURATIONS Customized line capacities Different thickness and width ranges Full automation packages Factory layout engineering Remote support solutions Spare parts and training packages 📸 REFERENCE PROJECTS You can see and review our completed (manufactured and installed) projects on our Youtube channel. For machine videos and references, please visit our YouTube channel. You can search on Youtube as Bosporas Makina / Ayika Group.

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers Kodeyzbm Uspfx Ahasdl APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. Heavy-duty coil slitting line designed for high precision cutting of steel coils with customizable thickness configurations up to 4 mm. TECHNICAL DETAILS Coil Thickness: 0.3 – 3 mm / up to 4 mm Coil Width: 300 – 1500 mm Coil Weight: up to 20 tons Slitting Speed: up to 100 m/min Slitting Accuracy: ±0.1 mm Minimum Slitting Width: min. 50 mm Material Type: CR, HR, Galvanized, Stainless Steel, PPGI, Cold Rolled Steel, Aluminum This coil slitting line is designed for high-precision slitting of steel coils with heavy-duty capacity and reliable performance. It is suitable for processing materials 3-4 mm thickness, up to 1500 mm width and coil weights up to 20 tons. Available with single or double loop pit configuration to optimize material flow, line speed and production efficiency. The system consists of fully integrated units including hydraulic decoiler, coil loading car, entry peeler, leveler, slitting head, scrap recoiler, tension system and hydraulic recoiler, ensuring continuous and stable production. The line is available in different configurations depending on production requirements: This flexible structure allows the system to be optimized based on material type, thickness and production needs. KEY FEATURES Heavy-duty design for 20-ton coils High precision slitting (±0.1 mm) Advanced slitting head with precise adjustment system Hydraulic and automated operation systems High-speed production (up to 100 m/min) Robust mechanical structure for long-term operation ADVANTAGES Short lead time compared to European manufacturers High efficiency and continuous production Reduced downtime Customizable configurations Reliable and user-friendly automation system APPLICATIONS Steel service centers Automotive industry Construction sector Metal processing facilities OPTIONAL EQUIPMENT Rotary turnstile system Coil handling and transfer systems Advanced automation solutions Kjdpfxsyy Ru Ej Ahaedl Custom-designed configurations *Images shown in this listing include reference installations of similar coil slitting lines (3 mm and 4 mm thickness ranges) successfully manufactured, delivered and commissioned in different countries. These projects demonstrate our proven experience in delivering reliable and high-performance slitting lines worldwide.

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll Kdsdpfovut Sdsx Ahasl coil loop control Ultrasonic