Coil line

Arku TRM 50125/21

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. Pgodpfx Aiskyrphorju -Flattening Gap Adjustment: Servo Hydraulic with PLC Control -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm -Total Weight: 40.000 kg..

Year of construction: 2017, operating hours: 30 h, condition: as good as new (ex-display), Strip thickness max. 4 mm Strip width 300 mm Pedpfx Aijb Nbgljrsgu Repeat accuracy +/- 0.05 mm NC drive with compact control unit Feed force 3000 N (300 kg) Strip clamping pressure max. 1.2 tons

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Pgjdpfx Aiodnzvdsrju strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Condition: used, Year of construction: 1996, machine/vehicle number: 90.293/1, material width:75 mm total power requirement:1,5 kW Pjdpecxxpnofx Airsgu dimensions of the machine ca.:1,90 x 1,15 x 1,25 m

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Psdpfxogbl Aas Airjgu Leveler was dismantled, checked and then repainted

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Pedpfx Aijxyhhasregu Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Pgsdpoguvtljfx Airou Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, pressure 160 t Psdotqm Dgjpfx Airegu distance between columns mm stroke 200 mm table surface area 2040 x 840 mm throat 450 mm no. of strokes 30 - 55 Hub/min dayligth 450 mm ram surface 1700 x 800 mm ram adjustment 100 mm total power requirement 11 kW weight of the machine ca. 21,1 t dimensions of the machine ca. 2,2 x 1,94 x H 3,66 m - safe for hand inlay work - Conversion to West - Photoelectric barrier

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm Pedpfjlp U R Dox Airegu

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm Pjdpfx Aobh S Dpjirsgu coil weight: 2 t mandrel Ø: 406/508/610 mm