Used Mb 50 Ring Rolling Machine for sale (86,382)

Condition: new, Year of construction: 2026, Profile Bending Machine Gedpfxsdkxibe Ahajuf ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg - dimensions: 980x1430x1600 mm

Year of construction: 1989, condition: used, functionality: fully functional, Model Gemini ESCO D6-SR with decoiler Year of manufacture: 1989 Max. material diameter: approx. 9 mm Gjdpfxsyip E Te Ahaeuf Max. processing length per stroke: approx. 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine bed only): approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Control voltage: 110 V 50Hz Rated power: 3.4 kW Rated current: 6 A

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 MD Gsdpfod Eyp Isx Ahasuf - with digital readout - motorized - two working rolls - shaft diameter 30 mm - including standard rolls - with basement - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 180 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Guodpfxsyurx To Ahaof Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg Gusdpfsdkxlkex Ahasf - 400 volt 3 phase

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Gedexbtx Hjpfx Ahajuf Weight: approx. 200 kg

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller Godpfx Aod Eyz Uohasuf - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller Gusdpfjdktnvsx Ahaof - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm Guodpfedkxiyjx Ahasf

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: Gjdpfx Ajd Ey A Ajhajuf two axes controlled touch screen memorize of 1000 programs interpolation

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set Guedjt Hwfnepfx Ahajf - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Guedpfx Ahev T Uvzsajf Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: ready for operation (used), * Brand: Främbs & Freudenberg Gusdpsywmu Aofx Ahaof * Surface: 5000 x 2000 mm - 2 decks * Driving: 18,5 kW E-motor.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR Gujdpfjglaq Ijx Ahaof The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Year of construction: 2008, condition: good (used), Grist dust removal + 2 comp. Grav. dosing unit MB Engineering T 250, year: 2008, price: 6.800 €, contact: Mr. Rainer Eckerle Guodpfjd S S Rzox Ahaof

Condition: used, Thread rolling machine UPWS 25. Gedpfjzd Rf Nex Ahasuf

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Gsdpszt Iaiefx Ahaeuf Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Guodpfezmu Hcjx Ahaof Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Gsdpfx Aszhkh Eshaeuf Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Gsdpfx Ahoy Ugtasaeuf Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. Gedpfx Ahjwzvkhoajuf What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs Gusdpfx Aeztwx Ushaef The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Gsdpfjzumnzex Ahaeuf Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Godjw Hanhspfx Ahaouf Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Gusdpfjzrt Ivox Ahaof Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility