Used Motorized Shear In Div. Lengths for sale (57,843)

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track Lredpfogu N E Djx Ab Uet -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Lrodpfsu Rimmjx Ab Uot Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Technical data: - max. working width 1020 mm - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front Lredpfx Abszrk Rus Uot - electric foot pedal - tapping – single stroke can be preselected - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: N 74-1057, Offer 24454 Technical data: Lodpjuzvpcjfx Ab Uert - max. cutting width 2520 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - throat depth 200 mm - Stroke rate up to 30 /min - front angle fence 1100 mm - front support arm 400 mm - mot. back gauge 5 - 600 mm - cutting line lighting - Sheet support - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Condition: good (used), Year of construction: 1990, machine/vehicle number: 63/4, Offer 26093 Technical Data: Lodpfjyzpbmjx Ab Uort - Max. cutting length: 3050 mm - Max. material thickness at 40 kg/mm² strength: 2.5 mm - Cutting gap adjustment - Cutting angle: 1°35′ - Strokes: 50 1/min - Frame throat: 100 mm - Table height: approx. 750 mm - Front angular stop: 850 mm - 2 support arms: 500 mm - Manually operated backgauge accessible from front: 5 – 750 mm - Pneumatic sheet support - Electric foot switch - Drive: 400 V / 5.5 kW - Required space: approx. W 3800 x H 1500 x D 1400 mm - Weight: approx. 2900 kg

Condition: used, Coating chain composed of chain, rails and drive motor, approximate length 300 m. Used Ledpfx Ajy Ud S Teb Uert

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Technical data: Lsdpfx Abetpnldo Ujrt - max. working width 3040 mm - max. material thickness 4 mm - manual adjustment of cutting angle - stroke rate up to 34 1/min - rear stop with positioning control Pos100, 750 mm - front angle stop - 2 front support arms - rear guard with light barrier - electric foot switch - pneumatic connection 6 bar - power supply 400 V - space required without support arms approx. W 4000 x H 1400 x D 2100 mm - weight approx. 4700 kg

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Lodpfx Abev H Hfne Ujrt

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW Lodpfxsx S Ed Eo Ab Uert - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: Lsdpfx Aoztvn Ueb Ujrt - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: used, functionality: unexamined, Ferwood code: RU0011670 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 280KG - 940X91X30 Lrodpfxsya Dchs Ab Uet

Condition: good (used), Year of construction: 2006, machine/vehicle number: 313406334, Offer 24236 Technical specifications: - Max. working width 2550 mm - Max. cutting capacity St 40 4.0 mm - Cutting angle 1.30° - Position-controlled backgauge 20 - 750 mm - Front angle stop + support arms - Electric foot switch - Stroke rate up to 34 per minute depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including backgauge, without front support arms - Approx. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg Lrodpfswd Nu Sox Ab Ust

Condition: used, Year of construction: 2006, machine/vehicle number: 1624, Item No. 26248 Technical specifications: - For sheet metal with 4 sides, diameter up to approx. 1200 mm - For sheet metal with 8 sides, diameter up to approx. 1500 mm - Overhang of the knife head: 240 mm - Overhang of the guide arm: 900 mm - Max. cutting capacity at 45 Kp/mm²: 4.0 mm Lsdpfx Ajzxc Hzsb Ujrt - Drive speed, infinitely variable: 6 to 30 m/min - Manual material clamping + manual adjustment of the knife - Drive: 400 V / 3.00 kW - Electric foot switch - Space requirement: approx. W 2450 x H 1700 x D 950 mm - Weight: approx. 1300 kg

Condition: used, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1, We are selling the complete garment manufacturing machinery from our former knitwear factory. The machines shown are available for sale and are part of a larger inventory of textile production equipment. Please find the attached Excel spreadsheet containing a list of all 165 machines. We also welcome offers for this complete machinery package. Thank you, and we look forward to hearing from you. Lredpfx Abezimkxs Uot | Machine type | Quantity | | ----- | ----- | | Lockstitch sewing machines | 36 pcs. | | 2-needle lockstitch sewing machines | 4 pcs. | | 4-needle lockstitch sewing machine | 1 pcs. | | Overlock sewing machines | 51 pcs. | | Coverstitch sewing machines | 32 pcs. | | Flatlock sewing machines | 6 pcs. | | Cup seaming machines | 3 pcs. | | Linking machines | 3 pcs. | | Arndt sewing systems | 5 pcs. | | Blindstitch sewing machines | 5 pcs. | | Blindstitch spot tacking machines | 4 pcs. | | Shell stitch sewing machines | 2 pcs. | | Buttonhole sewing machines | 2 pcs. | | Button attaching machines | 8 pcs. | | Bartack sewing machines | 3 pcs. | | Total Quantity | 165 pcs. |

Condition: excellent (used), functionality: fully functional, machine/vehicle number: div., Sale of Machines Due to Business Closure Due to the closure of our business, we are selling various like-new machines: 1. Flatlock machines, Yamato, FD-62-01MR (MS7RF) – €2,495 2. Metal detector, SBEC, Model ZD-630D-120mm – Target price: €3,950 Ledpjwqz D Sofx Ab Usrt 3. Label cutting machine, CUTEX, TBC-50SH – Target price: €1,995 4. Linking machine, EXACTA, Classe 602, Gauge 3, Made in Italy – Target price: €995 5. Overlock machines, SIRUBA, 504M5-04/BK with servo motor and pneumatic foot lifter – €600 each (2 units) 6. Gathering machine, Pfaff, 901-3811-026/001, Model 492326, Made in Germany – Target price: €795 We also have approximately 400 garment sewing machines, quilting machines, overlock machines, 2-needle hem stitch machines, various special machines, etc., for sale at favorable prices. If you are interested, please inquire. All prices are ex works (EXW), location: 440157 Satu Mare, Romania. If you have any questions, please do not hesitate to contact us. We look forward to your reply. Sincerely, Otto Simma SIHA Group

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Lsdpfxez Ei D Ro Ab Usrt Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Year of construction: 2026, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m Lrjdpfjfv T Nmex Ab Uet • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2017, Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Lrodpfxowhd H Ro Ab Ust For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2024, condition: new, Motorized sheet metal shear Technical data Cutting capacity: 2.5 mm Cutting length: 2550 mm Cutting angle: 1°40′ Stroke rate/min: 35 1/sec Motor power: 3 kW Lredpfshk Nf Rox Ab Ujt Back gauge range: 550 mm Table width: 400 mm Table height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1540 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. Ljdjy Uquhepfx Ab Ujrt The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Lrjdpfx Abjfifbbo Ust immediately available ex works Freight costs on request

Condition: new, sheet length: 1100sheet thickness: 6motor: 7,5width: 2250length: 1750heigth: 1400Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Lrodpfxegh Ndms Ab Uot Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: good (used), Year of construction: 1968, functionality: fully functional, Robust Altendorf F90 panel saw in a heavy-duty, solid design. The machine features a large sliding table with a cutting length of approximately 2,600 mm, a parallel fence, and a crosscut/miter fence. A cutting width of approximately 1,250 mm is available to the right of the saw blade. A classic, robust Altendorf machine for use in carpentry workshops and woodworking businesses. Technical specifications Manufacturer: Altendorf Machine type: Panel saw Year of manufacture: 1968 Cutting length: approx. 2,600 mm Cutting width to the right of the saw blade: approx. 1,250 mm Motor power: 5.5 hp / approx. 4.0 kW Voltage: 380 V Ledpez D Uqtjfx Ab Uort Equipment Large sliding table Parallel fence Crosscut/miter fence Saw blade guard Manual adjustments Heavy-duty, solid design The machine is in used condition, commensurate with its age. Transport is possible for an additional charge! Note The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pc. squaring arm with scale 2 pcs. sheet support arms 1 additional sheet support arm (for models 1106–1306–1505) Finger protection Ball transfer table Easy blade gap adjustment from the front Lrsdpfegick Dox Ab Ujt Ballscrew Stroke (cut) counter Portable foot pedal with emergency stop button Photocell on the rear safety guards

Condition: new, sheet length: 1360sheet thickness: 3Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Lrjdpoxx D Efofx Ab Ust Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards