Used Nordblast Sandblasting / Shot Peening Machine for sale (65,633)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 18M0227, Shot blasting / sandblasting machine. Used for a short period, custom-made by NORDBLAST. The machine’s original purpose was to compact the aluminum from which bicycle rims are made and to create a rough surface texture, resulting in a homogeneous rim surface. Thanks to its nozzle-based application system, the machine is versatile and suitable for various applications. SIEMENS control system, filtration unit, etc. Laedpfozu Slrjx Adhjf

Condition: used, Sandblasting Machine, Surface Cleaning Equipment, Sandblasting Cabinet, Used Machine Compressor: Manufacturer: Atlas Copco Type: XAS 90 Year of manufacture: 1992 Max pressure: 8,5 bar Deutz engine Overall dimensions: Width: 1500 mm Depth: 3500 mm Height: 1300 mm Ledpfsy H I U Njx Adhoaf Tank dimensions: Ø 630 × 1200 mm – 2 pcs Dust chamber dimensions: Width: 930 mm Depth: 630 mm Height: 1390 mm Sold in the condition shown in the pictures, with accessories.

Condition: refurbished (used), Shot blasting machine, Turntable Shot Blas Machine, abrasive blasting machine, surface treatment machine, Wheelabrator-Berger, Used Machine Manufacturer: Wheelabrator-Berger Maschinenfabriken GmbH & Co. KG Machine No.: 8502 Order No. (Kom. Nr.): 80305 Overall Dimensions Width: 2000 mm Depth: 2150 mm Height: 3900 mm Lodpfjzbqp Djx Adhoaf Dust Collector Dimensions Width: 1400 mm Depth: 1270 mm Height: 3500 mm Dust Collector Manufacturer: Abrasiv Technical Specifications Automatic cleaning process with air blow-off Total electrical power: 15 kW Refurbished shaft and belt pulley Two electric motors have been rewound

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Lasdpfozb Dqhex Adhsf

Condition: excellent (used), Year of construction: 2012, Sandblasting cell with Staubli TX60L robot Country of origin: France Year of manufacture: 2012 Control system: CS8C-TX60 Number of axes: 6 Maximum load capacity: 5 kg Nominal load: 2 kg Reach: 920 mm Lsdpfxoqgch Eo Adhoaf Repeat accuracy: 0.03 mm Cell: ALPROBOTIC MB100

Condition: like new (used), Year of construction: 2026, operating hours: 22 h, overall weight: 1,500 kg, We offer a demonstration table-type shot blasting machine – high-quality Czech production, using quality materials in its manufacture. Type – TSM1. Number of operating hours – 22. - Turntable diameter – 1000 mm - Maximum height of the blasted part – 550 mm - Overall machine height – 2750 mm - 1x blasting turbine – power consumption – 5.5 kW, turbine with a frequency converter for regulating the turbine rotation speed. The turbine has both left and right rotation directions, as needed. - Abrasive conveying system – power consumption – 0.75 kW. Ljdpfeztvclsx Adhsaf - Table rotation – power consumption – 0.75 kW - Total machine power consumption – 7 kW. The cabinet is lined with manganese steel. We also manufacture table-type shot blasting machines with a table diameter of 1500 mm. A significant advantage of the machine is the ability to change the turbine rotation direction to either right or left. Shot blasting equipment with CE certification. Another advantage of the equipment is its high efficiency during shot blasting, quiet operation, low energy consumption, and the requirement for a small space for installation. In its category, this table-type shot blasting machine can be considered very well-designed. (Sandblaster, sandblasting, shot blasting, sandblasting equipment, shot blasting equipment, shot blasting machine). Blast machine.

Condition: reconditioned (used), functionality: fully functional, We offer refurbished turbines from a continuous blasting machine – Rösler RRB 22/5-L. Turbine type: Hurricane H42. The stated price is for 1 unit. Turbines are refurbished using original spare parts made of tool steel. Ledpoztp Alofx Adheaf Blasting machine, blasting nozzle, blasting and sanding, sandblasting, blasting, shot blasting turbine.

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Lasdowcfvpspfx Adhef

Year of construction: 2020, condition: ready for operation (used), Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible. Laedpfxoxdc U Ns Adhsf

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer a drum-type shot blasting machine with a rubber belt – COGEIM TG1, a machine equipped with a magnetic separator. Year of manufacture – 2015. Overall height – 4595 mm. Drum diameter – 700 mm. Drum working load – 200 kg. Turbine power – 5.5 kW. Lsdpeztp Injfx Adhjaf Automatic filter. Total operating hours – 10500. The machine can be operated both manually and automatically. Complete documentation is available for the machine. The machine is currently disassembled and stored in a warehouse. Shot blasting machine, blasting, sandblasting, shot blasting, sandblaster.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, We offer a universal blasting machine with 2 turbines, type – TSMZ 250-20 10/10. Combined blasting unit, table-top and suspension type. Table diameter – 1000 mm Table load capacity – 250 kg Suspension diameter – 800 mm Suspension height – 1000 mm Turbines – 2 pcs, diameter 250 mm Power consumption per turbine – 3 kW Each turbine can be started independently. Elevator power consumption – 0.75 kW Filtration – manual dust removal Filter power consumption 1.5 kW, capacity – 1400 m3/hour Lodpfx Aszrmvysdhjaf Machine dimensions including filter – 3200 mm Machine depth – 1800 mm Total machine power consumption – 9.5 kW CE certificate.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 2,650 kg, Pneumatic table-type shot blasting machine. Manufacturer – SCHLICK Weelabrator, Germany; Model – TT 5; Year of manufacture – 2010; Applications – cleaning, rust removal, paint removal, surface preparation for painting, removal of rust and scale; Laodpfx Aonxkr Ajdhsf Single workstation for pneumatic shot blasting on a rotating table; Abrasive material – low carbon angular steel shot; Working chamber dimensions – 2 x 3 x 2.8 m; Diameter of retractable worktable – 1600 mm; Maximum workpiece height – 1000 mm; Maximum workpiece weight – 2000 kg; Blast nozzle diameter – 10 mm; Optional use – shot peening; Technical documentation (DTR) – available; CE certification – available. The machine is connected, fully operational, and ready for inspection.

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Condition: used equipment (not new/factory), functions normally, tested and operational. Lasdpfjzvdfmjx Adhef

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Ljdpjyhnu Djfx Adhoaf Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Condition: used, Year of construction: 1986, functionality: limited functionality, We offer a continuous spray booth – Gutmann RZ – 1252. Ledpfxjzl Ryio Adheaf Year of manufacture: 1983 Inlet/outlet dimensions: 1200 x 350 mm (w x h) Turbines: 4 x 7.5 kW Electrical control panel, new in 2024, including frequency converters. Infeed conveyor: approx. 9000 mm Outfeed conveyor: approx. 9000 mm Filtration unit - Bartling Year of manufacture: 1996 Capacity: 6000 m3/h Motor power: 5.5 kW The machine is functional and still in operation. The stated price is for the complete machine + control panel + filtration + conveyors.

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling - Automatic part blow-off - Rosler BF 40/40 dust collection system Ljdpfxowvgbgs Adhsaf - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg Lasdjwaiv Uepfx Adhef

Condition: excellent (used), Year of construction: 1999, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 4204, pressure: 6 bar, total width: 1,700 mm, inner dimension width: 1,700 mm, workpiece weight (max.): 3,000 kg, turntable diameter: 1,400 mm, We offer this shot blasting machine manufactured by Carlo Banfi in 1999 and completely overhauled by METAL SERVICE s.r.l. in 2024. Rotating barrel machine with metal ribs Lasdpfx Adeznvtajhef Capacity: 3,000 kg Diameter: 1,400 mm Chamber width: 1,700 mm Magnetic separator Double turbine, each with a 30 kW electric motor and belt drive Complete with: Dust collection filter Loading hopper complete with guards Parts unloading conveyor belt Complete with CE certification, electrical diagrams, and operating and maintenance manual If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Laedpszkivtjfx Adhef Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: good (used), Year of construction: 2005, functionality: fully functional, total width: 2,000 mm, total length: 1,650 mm, total height: 3,500 mm, input voltage: 400 V, overall weight: 3,054 kg, We are offering this used Tilghman Wheelabrator T170 sandblasting machine, manufactured in 2005, for sale. It is in good condition. - Integrated dust extraction system Lsdpfxezl Sife Adheaf - Year of manufacture: 2005 - Model T:170 - Manufactured in the UK - Maximum load: 225 kg - Blasting chamber dimensions: 750 x 930 mm - Turbine: 7.5 kW - Weight: 3054 kg - Overall dimensions: 1650 x 2000 x 3500 mm - Power supply: 400V, 26A - Wheelabrator still provides spare parts and service for these machines. If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 15 m³/h, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 2,000 mm, inner dimension height: 650 mm, volume flow: 12,000 m³/h, tank capacity: 2,500 l, air pressure: 6 bar, suction capacity: 12,000 m³/h, New RB-2000 Conveyor Blast System Description: The RB-2000 conveyor blast system from ABRAZIV Kft. was developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The system is manufactured to order and can be individually configured according to the customer's requirements. With a passage width of 2,000 mm and a workpiece height of up to 650 mm, the RB-2000 is particularly suitable for large and heavy workpieces. It offers maximum flexibility for demanding applications in steel construction, mechanical engineering, tank construction, and the metalworking industry. The RB-2000 is equipped with four high-performance ABR-500 blast turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and a uniform blasting result. The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which simultaneously reduces noise levels. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the system are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 2,000 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 650 mm Blast Turbines Number: 4 Type: ABR-500 Turbine diameter: 500 mm Speed: 2,600 1/min Blasting media flow rate per turbine: 150–300 kg/min Conveyor Load capacity: 1,500 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 59–103 kW Cartridge filter: 15 kW Compressed air: min. 6 bar Compressed air consumption (filter): 15 m³/h Other Data Blasting media capacity: 2,500 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 12,000 m³/h Mains voltage: 3 × 400 V Control voltage: 230 V Frequency: 50 Hz Optional Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Laodozikaqepfx Adhof Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-2000 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Mechanical engineering Tank construction Contract blasting operations Location / Manufacturing Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast systems individually according to customer requirements. In addition to the RB-2000, other sizes and special versions are available. We will be happy to advise you on the design of the appropriate system and provide you with a non-binding offer. Price on request.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, inner dimension width: 1,500 mm, inner dimension height: 450 mm, input voltage: 380 V, volume flow: 6,000 m³/h, tank capacity: 2,000 l, air pressure: 6 bar, Equipment: documentation/manual, New Conveyor Blast Machine RB-1650 Description: The RB-1650 conveyor blast machine from ABRAZIV Kft. has been developed for the economical surface treatment of steel sheets, profiles, tubes, and welded structures, and is ideally suited for descaling, derusting, cleaning, and roughening steel surfaces. The machine is manufactured to order and can be individually configured according to customer requirements. The RB-1650 is equipped with four high-performance ABR-400 blasting turbines. Two turbines are arranged above and two below the conveyor, ensuring optimal coverage of the cross-section and uniform blasting results. Laodpfezidykox Adhjf The inner surfaces of the blasting chamber are lined with highly wear-resistant manganese steel. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed blasting media circuit with screw conveyor, bucket elevator, blasting media cleaning, and dosing system ensures reliable and economical operation. All functions of the machine are operated via a central control system. In addition to automatic operation, a manual mode is also available for maintenance work. Technical Data Passage Passage width: 1,650 mm Min. workpiece length: approx. 1,500 mm Max. workpiece height: 450 mm Blasting Turbines Number: 4 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,600 1/min Blasting media output per turbine: 130 kg/min Conveyor Load capacity: 1,300 kg/m Speed range: 0–4 m/min Power Requirements Base machine: 44 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption (filter): 3.2 l/min Compressed air tank (filter): 250 l Other Data Blasting media capacity: 2,000 kg Recommended blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Mains voltage: 3 × 380 V Control voltage: 220 V Frequency: 50 Hz Optional Extras Frequency inverter Extended conveyors Automatic height scanning Automatic blasting media dosing Special coating Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Application Areas The RB-1650 is particularly suitable for: Steel sheets Steel profiles Tubes Hollow profiles Welded structures Steel construction Machine construction Tank construction Contract blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our conveyor blast machines individually according to customer requirements. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price Price on request.

Condition: refurbished (used), functionality: fully functional, air demand: 6 m³/h, compressed air connection: 6 bar, warranty duration: 6 months, workpiece weight (max.): 800 kg, Fully Overhauled Rubber Belt Blasting Machine GH-4 For sale is a fully overhauled rubber belt blasting machine GH-4, professionally refurbished by the manufacturer ABRAZIV. This machine is ideally suited for deburring, descaling, cleaning, and surface roughening of castings, forgings, press parts, and other bulk goods. Its robust design and reliable blasting technology make it versatile for use in foundries, forging shops, and the metalworking industry. The machine has been professionally overhauled (refurbished) and is in perfect technical condition, like new. It is immediately available and can be inspected by appointment. Technical Data Blasting Chamber Rubber belt width: 1,300 mm Belt drum diameter: 1,150 mm Maximum batch weight: 800 kg Blasting media capacity: 800 kg Blasting Turbines Number of turbines: 2 Power per turbine: 11 kW Connection Values Ljdpszicuajfx Adheaf Electrical connection power: 27.5 kW Compressed air connection: 6 bar Compressed air consumption: 6 m³/h Extraction capacity: 5,500 m³/h Condition Fully overhauled (refurbished) Technically inspected Immediately available As the manufacturer, we can also offer you the following services, if desired: Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Location: Kecskemét, Hungary Inspection is possible at any time by prior appointment. Price on request.

Year of construction: 2025, condition: new, Roller Conveyor Shotblasting Machine Ledpfx Ajvnrr Aedhsaf Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform. Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines. Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit. It is used in sheet, NPI, NPU, Profile blasting processes. Ideal for rusting, roughening and cleaning before painting. The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets have been added to the parts of the leggings that are close to the blasting zone. The wear plate cladding is screw-in design for future wear-based replacements. The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition. CODE W x H(mm) TURBINE SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1000 16 x Ø 400 SK - 9 3,000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2000 22 x Ø 400

Year of construction: 2025, condition: new, Pipe Shot Blasting Machine A pipe shot blasting machine is a specialized surface treatment system designed for cleaning, roughening, or preparing the inner or outer surfaces of cylindrical (pipe-shaped) metal parts. It removes rust, oxide, scale, burrs, and old paint coatings using high-speed abrasive blasting (with steel shots, grit, or sand). ⚙️ Working Principle Loading: Pipes are placed on a roller or conveyor system for easy movement. Laedpsxuhrbjfx Adhef Transportation: The pipes are automatically conveyed into the blasting chamber via a roller conveyor or continuous feed line. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive material onto the pipe’s surface. During the process, the pipe rotates and moves forward, ensuring uniform cleaning across the entire surface. Cleaning and Recovery: The used abrasive is automatically collected, filtered, and reused. Dust and impurities are removed through an industrial dust extraction and filtration system. CODE DIMENSIONS TURBINE CBK - 1 Ø 48 – 219 2 x Ø 320 CBK - 2 Ø 219 – 500 2 x Ø 320 CBK - 3 Ø 500 – 1000 2 x Ø 500 CBK - 4 Ø 1000 – 2000 2 x Ø 500