Used Omera Trimming Bearding Machine for sale (66,525)

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Ledpfx Akokvnumsmsah Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Lsdpfx Ajkvnuuokmeah Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Kapasite : 500 TON Laedpfx Aszxq N Dskmjh Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: used, Year of construction: 2001, OMERA DIAMETER: 1200 mm Laodpfjy Rx Eyox Akmjh

Condition: used, Year of construction: 1998, machine/vehicle number: 098211, KP09 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1998 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Lasdpfx Ajzxq Uyekmsh Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Ljdpfsz E Damex Akmsah Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: M02L/6992, Offer Number: M02L/6992 Machinetype: trimming machine Make: HILGELAND Type: ME2SP Constr. year: 1965 diameter range: 2,6-8 mm Lodpfswi Taisx Akmsah shaft length under head: 6-50 mm output pieces/min: 260 Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, number of slots in tool magazine: 16, controller manufacturer: siemens, controller model: sinumerik 840D, feed rate X-axis: 800 m/min, feed rate Y-axis: 800 m/min, feed rate Z-axis: 600 m/min, spindle motor power: 6,500 W, number of spindles: 2, rotational speed (max.): 30 rpm, spindle nose: HSK F50, spindle speed (max.): 36,000 rpm, Equipment: documentation/manual, 5-axis CNC machining center for machining plastic and composite parts. Immediate availability. Cartesian suspension bridge construction. Axis motion: brushless servomotors, rack-and-pinion systems, guides with preloaded recirculating ball bearings. Laedpjtphpisfx Akmoh X 2500mm 80m/min Y 1500mm 80m/min Z 900mm 60m/min C 540° 30rpm A 315° 30rpm Rotary table with mounting holes and jig centering. Head: 2 heads c.u. 8 positions 6.5kW (S1) HSK F50 36,000 rpm liquid cooling. CNC: Siemens Sinumerik 840D Lubrication: automatic grease Supply voltage: 3 x 400V / 50Hz (+/- 5%) Supply pressure: 6 bar Installation: upon request

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M02L/7647, Offer Number: M02L/7647 Machinetype: trimming machine Make: HILGELAND Type: ME2VSP Constr. year: 1977 diameter range: M8 shaft length under head: 6-80 mm output pieces/min: 200 Ljdpfxowi S Sdo Akmsah Location: In our warehouse

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Ledpsv I D Shefx Akmeah Chips discharged into a trolley Main product on the feed roller table

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M02L/8406, Offer Number: M02L/8406 Ledpfx Akowi S Avemjah Machinetype: trimming machine Make: HILGELAND Type: ME4SP Constr. year: 1978 diameter range: 5-12 mm shaft length under head: 10-130 mm output - pieces/min: 120 Location: In our warehouse

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Lodpfju Ni Iujx Akmjah Diameter 1070 mm 4 axes variable 2 x 55 KW Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES - KW 1,5 Laedowr Uhyopfx Akmjh - Volt. 230/50 - Matr. 201409V - Year 2014

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Lsdsxxb Rrjpfx Akmjah Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Edge trimming machine Working height: 800 mm Ledpfxswiwnqo Akmoah Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. Laodpfoz Ek S Ajx Akmeh A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Lodpfjzf Nk Tjx Akmjah Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2019, TECHNICAL DETAILS Lajdpfs Aayk Rjx Akmeh General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Laodpfx Aex D Tbmjkmsh Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. Laodpfx Aksxdr Swemoh The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system Ljdpjyn Sdpefx Akmjah PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02L/7787, Offer Number: M02L/7787 Machinetype: trimming machine Make: HILGELAND Laodpfx Ajwi S Ryokmoh Type: ME2VM Constr. year: 1983 diameter range: 2,2-8 mm shaft length under head: 6-40 mm output pieces/min: 250 Location: In our warehouse

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR Lasdpfx Akez Eh Egjmsh SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Lajdoz St Hwopfx Akmoh Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Lodpfx Aez R Rbdekmoah