Trimming and wet cutting machine

Wurster & Dietz FR7

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Bsdpfx Akewaiaas Hswl

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 Bwedpfx Akjx Aktwj Hel - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: good (used), functionality: fully functional, Passage height 160 mm Passage width 800 mm Feed speed steplessly adjustable 0–70 m/min Hydraulic width adjustment with pneumatic cylinder, electrically adjustable, Drive motor Siemens 50 kW with V-belt drive, Wood infeed and outfeed table, Bedpfx Aswx Hrwek Hjwl The machine has been technically inspected and is in working condition.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Bwodpfxjv Np H Hs Ak Hel Required air pressure (bar): approx. 8

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor Bedpfxot Hg Huo Ak Hewl With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Bwedpfsw Ug Agsx Ak Hol

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker Bjdpfetrd Hfsx Ak Hewl

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: Bwjdjx S E Haspfx Ak Hel 400x250 mm 4 SIDES + EDGE BEVELERS

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; Bwodpfx Akex Akq Nj Hsl - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Bedpfswyda Usx Ak Hjwl Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)