Used Pcb Assembly for sale (3,764)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center Prodjyzh Ulepfx Alwsb - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Pedpfx Aljzlx E Tjwerb Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Pedpfezl Scrsx Alwerb Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, PBT Works SuperSWASH III PCB Cleaning System / Printed Circuit Board Washing System – 2021 Cleaning system for printed circuit boards / electronic assemblies For sale: a cleaning system for the professional cleaning of printed circuit boards and electronic assemblies. Features: * Cleaning, rinsing, and drying in a single process Podpfjz D Di Ssx Alworb * Suitable for printed circuit boards, assemblies, solder frames, and stencils * Touch panel operation * Integrated DI water treatment system * Conductivity measurement * Efficient air knife for rapid drying * Barcode scanner for traceability * Industrial design Condition: used, fully functional Inspection possible by arrangement. Please contact us if you are interested.

Condition: used, Year of construction: 2012, First Article Inspection of PCB Assemblies. Podpfxjzhlbyo Alwjrb Total of 2 units available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image. Prsdsz Ay Rrjpfx Alwjb

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Predox Emqgspfx Alwob Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. Pedpfx Ajibichjlwsrb If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners Prsdpfx Aozhub Ajlwjb - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,290 mm, total length: 2,000 mm, total height: 1,000 mm, empty load weight: 50 kg, load capacity: 250 kg, table width: 1,290 mm, table length: 2,000 mm, Demo model assembly table, type AT-2000 (see photo 1). Work table with adjustable height between 850mm and 1,000 mm. The top surface is fitted with rubber. Working surface area: 2,000 mm x 1,290 mm. Pjdpfxez D Hu Do Alwsrb Demo model, available for immediate delivery. Price: €995, excluding shipping costs. We are actively looking for dealers in Europe! See more examples of our products in the photos (see photo 2 and onwards). DutchteQ develops high-quality, modular workshop equipment for the façade construction industry (wood, aluminum & PVC). Interested? Contact us and we will be happy to discuss the possibilities.

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Pedpfx Ajzrwapjlwerb Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw Podpfx Alszbvmhewjrb operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) Pedpfx Ajzc N Axjlwsrb End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system Prjdpfxszc N H Ds Alwob 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: used, Year of construction: 2013, Working condition machines. Feeders included. Used: 8mm doble – 63 pcs. Predpfez Du Skox Alweb 12 mm – 40 pcs 24/32 mm – 13 pcs Stick feeder – 2 pcs Tape feeder 12 mm – 1 pcs Tape feeder 8 mm – 1 pcs Tape feeder 44/56 mm – 1 pcs New ones: Stick feeder – 1 pcs Tape feeder 44/56 mm – 3 pcs Tape feeder 24/32 mm – 5 pcs

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. Podoxtfqxopfx Alworb • Illumination is fully functional. • Device tested and ready for use. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: used, Year of construction: 2019, Computerized Beveling Machine SS20, Skiving Machine, Leather edge and tip thinning machine Year of Construction: 2019 Condition: Ready for operation Functionality: Fully Functional Overall weight: 145kg Kw: 1.2 Hz: 50/60 Pedpfszdgg Dsx Alwsrb

Year of construction: 2018, condition: new, Witron Wibond Information Systems Pick-Vision-System Paperless picking We have taken over the remaining materials from Wibond. In addition to the offers below, we also offer repairs to your Wibond assemblies - please feel free to enquire without obligation! Several 100 pieces of various modules available WIB-P-10010 PKK 1 RGB WIB-P-10011 PKK 7 RG WIB-P-10015 PKN 4 RGB WIB-P-10016 PVI WIB-P-10067 PVI-T V2.0 Feed_Barrier with Verpo WIB-P-10098 PBM Podepm Exqspfx Alwjrb WIB-P-10099 PBM E WIB-P-10101 PKK 1 RGB WIB-P-10108 PKN 4 RGB WIB-P-10118 PKN 2 RGB WIB-P-10134 PKA 5 RGB FB WIB-P-10137 PKN 5 RGB WIB-P-10138 PKS 2 RGB F WIB-P-10139 PKN 4 RGB S2 WIB-P-10141 FB RJ45 adapter PCB WIB-P-10149 PMC 3, PMC V3.2 WIB-P-10151 PKN 4 RGB WIB-P-10200 PKK 1 RGB WIB-P-10254 PKN 4 RGB S2 WIB-P-10257 PKS 2 RGB WIB-P-10298 PKA 5 RGB S2 WIB-P-20247 PVI WIB-P-20248 PVB WIB-WKS-8849 WITRON - Komanz V5.x with acknowledgment button, WIB-WKS-8859 WITRON - Komanz V5.x with acknowledgment button, WIB-WKS-9063 WITRON - connection without plug WIB-WKS-9800 WITRON - Komanz V7.x with acknowledgement button, WIB-WKS-9803 WITRON - Komanz V7.x with acknowledgement button, WKS-9806 WIB-U2-20152 DIC-ECM-I, used Corridor Display double sided EZ.138.5701S Church hymn displays: different versions of hymn displays and input devices

Year of construction: 2014, operating hours: 40,000 h, condition: used, functionality: fully functional, belt width: 560 mm, number of shelf rows: 8, machine/vehicle number: B6, High-Capacity Industrial Ambient Spiral Cooling Conveyor Tower Heavy-duty 8*2 -tier ambient spiral cooling tower engineered for food production and industrial bakery applications. Built entirely with a high-grade stainless steel frame and structure, ideal for washdown environments and strict hygiene standards. Key Technical Specifications: Tier Count: 16 continuous spiral tiers / turns. Belt Width: 560 mm food-grade blue open-mesh modular belt for maximum air circulation and product stability. Drive System: Heavy-duty Brevini / Rossi industrial planetary gear drive motor assembly. Prjdpfx Aoz E A Rkjlwsb Control System: Freestanding stainless steel electrical control cabinet featuring a Siemens SIMATIC HMI touch display panel, integrated VFD variable speed frequency drives, and emergency safety stops. Applications: Suitable for ambient cooling of baked goods, confectionery, wafers, packaged products, and snack items prior to packaging. Condition: Used, Dismantled ،fully functional, clean, and in very good working condition.

Condition: used, functionality: fully functional, Year of construction: 2001, Equipment: crane, We are offering this used Portain quick-assembly crane GTMR 386B, manufactured in 2001. Outreach 50.0 m, 1,500 kg. Maximum lifting capacity 8,000 kg. Hook height 22.60 m. Complete with ballast, spindles, and plates, including HBC radio remote control. Manufacturer: Portain quick-assembly crane Model: GTMR 386B Year of manufacture: 2001 If you have any questions or require further information, please do not hesitate to send us a message or call us. Pedszd Nx Ispfx Alwerb

Condition: like new (used), Year of construction: 2023, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 20240104, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Heidenhein iTNC 640, spindle speed (max.): 10,000 rpm, For sale is a vertical machining center with only 2,509 program running hours (as of September 15, 2026)! The machine is in first-hand condition and was assembled directly by the manufacturer! Inspections or test machining are possible at any time by arrangement. TECHNICAL DETAILS Travel in X-axis: 1,600 mm Travel in Y-axis: 800 mm Travel in Z-axis: 800 mm Rapid traverse rate X-axis: 32 m/min Rapid traverse rate Y-axis: 32 m/min Rapid traverse rate Z-axis: 32 m/min Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg Number of spindles: 1 Spindle speed: 1 – 10,000 rpm Speed control: stepless Spindle motor power: 37 kW Tool holder: SK 40 Mounting diameter: 40 mm Torque: 235.5 Nm Air through the spindle: available Tool magazine positions: 60 Tool changer: operable from the front MACHINE DETAILS Control: Heidenhain iTNC 640 Internal cooling: 20 bar Filter unit: band filter unit Input voltage: 380 V Input current type: three-phase Predpoz Arkksfx Alwjb Program running hours: 2,509 h (as of September 15, 2026, machine is currently still in operation) Dimensions & Weight Dimensions (L x W x H): 5,800 x 4,300 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT CE marking Chip conveyor Documentation/Manual Glass scales in all 3 axes Hexagon 3D infrared probing system Mobile electronic handwheel Internal cooling with 20 bar and band filter unit Air through the spindle Tool changer with 60 positions, operable from the front

Condition: ready for operation (used), Year of construction: 2024, operating hours: 235 h, controller manufacturer: FANUC, This PALMARY PCB-4520-3 centerless grinding machine was manufactured in 2024. It features a workpiece diameter capacity of Ø8–60 mm and a maximum workpiece length of 150 mm. The machine includes an automatic unloading attachment and adjustable speed for enhanced efficiency. If you are looking to get high-quality grinding capabilities, consider the PALMARY PCB-4520-3 machine we have for sale. Contact us for further details. Standard Features • Maximum Grinding Diameter: Ø60 mm • Regulating Wheel Speed: 30 rpm • Grinding Wheel Speed: 1,200 rpm (max. 45 m/s) • Grinding Processes: Infeed Grinding and Throughfeed Grinding • Integrated Dressers: 2 • FANUC CNC Control System • Adjustment Cart and Flange • Grinding Wheel and Flange • Standard Stopping Type Grinding Table • Stopping Type Blade • Diamond Dresser (2 pcs/set) • Main Axis Lubricating Device • Pilot Lamp Optional Equipment • Paper Filter (80 L/min with 260 L Tank) • Magnetic Coolant Separator (80 L/min) • Grinding Wheel Inverter (15 HP) • Fully Enclosed Splash Guard • Jib Crane for Grinding Wheel Change (PCB-45) • Vibration Meter for Manual Grinding Wheel Balancing (KINIK KGB-2010) • Throughfeed Table for Small Diameters (Ø8–38 mm) • Throughfeed Table for Large Diameters (Ø35–60 mm) • Automatic Unloading Attachment (Throughfeed Grinding) • Adjustable Speed • Workpiece Diameter Capacity: Ø8–60 mm • Maximum Workpiece Length: 150 mm • Additional Infeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Additional Throughfeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Spare Flange for Adjustment Cart and Adjustment Wheel Prsdpfx Aezhmunolweb Additional Information • Machine has no CE Certificate

Condition: excellent (used), Georgian bar assembly table Complete In very good and clean condition Good working order, tested As it is Pjdpeztyw Tsfx Alwerb Available immediately

Condition: repair required (used), functionality: unexamined, machine/vehicle number: 0011, Year of construction: 2013, total length: 2,000 mm, total height: 2,130 mm, total width: 1,820 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, table width: 400 mm, table length: 500 mm, space requirement length: 7,500 mm, space requirement height: 2,700 mm, space requirement width: 6,500 mm, Voxeljet VX500 industrial 3D printing system, manufactured in 2013, serial number 0011. Build volume: 500 × 400 × 300 mm. Overall machine dimensions: approximately 2000 × 1820 × 2130 mm. Weight: approximately 1200 kg. Electrical supply: 400 V, 50 Hz, three-phase, nominal current 7.8 A, fuse 16 A. The main printhead assembly is missing. The machine has not been tested and is offered as-is for repair, refurbishment or spare parts. The package includes Voxeljet VRS500, VCL1400, auxiliary extraction and filtration equipment, binder/chemical storage equipment, oven, wax bath and other accessories. Exact inventory to be confirmed. Predpfx Ajz Davbslwob Located in a Turkish Free Zone. Export and customs formalities to be arranged by the buyer.

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 Psdpezzp Ttofx Alwerb • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.