Used Robatherm Heating for sale (15,212)

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Ksdpox Uqc Ejfx Anijdu

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Kdodpfxjz D Ihfs Aniju

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts Ksdpfx Ansv D Uz Eoijdu - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters Kjdpfez Iww Rox Aniodu • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Kdedpfxe Aba Rgj Anisu Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 2018, operating hours: 123 h, power: 770 kW (1,046.91 HP), heating capacity: 810 kW (1,101.29 HP), temperature: 110 °C, Equipment: hot water, Mawera Type FFU700RIA, fully automatic wood chip heating system with underfeed stoking. Output: 810 kW. Domestic hot water system, supply temperature max. 110°C. Year of manufacture: 2018. Components: boiler body, combustion chamber and pneumatically cleaned heat exchanger, screw conveyor, automatic ash removal screw, ash separator, multi-cyclone, flue pipes for connection to the chimney, flue gas fan, operating manual, machine manual, control unit, control cabinet. It can be inspected on-site in Germany. Already dismantled; the firebox is to be relined with refractory bricks. Kdjdpfx As Abayusnieu

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW year: 2019 price: 4.200 € contact: Mr. Rainer Eckerle Kdodpfxo Aba Eqe Anisu

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HZQJ240620819, type of input current: three-phase, overall weight: 3,500 kg, input voltage: 380 V, table width: 2,000 mm, roll diameter: 470 mm, product width (max.): 1,800 mm, working width: 1,900 mm, Hongzhong Sublimation Calender (Rotary Heat Transfer Press) For sale: Professional dye-sublimation/rotary heat transfer machine by Hongzhong Machinery. Designed for heavy-duty industrial operation, offering high efficiency, reliability, and precision. Key Features & Advantages: Heating System: Thermal oil-heated drum system, ensuring uniform and stable temperature distribution across the entire cylinder surface. Control: Intelligent PLC touchscreen interface (WEINVIEW) with multilingual support and an over-temperature alarm. Functionality: Automatic felt/blanket tracking alignment and inverter-driven variable speed control. Safety: 4 emergency stop switches and an automatic cool-down function with auto shut-off once the temperature drops below 80°C. Applications: Ideal for the textile industry – supports both roll-to-roll continuous transfer and piece-by-piece (cut parts) production. Technical Specifications & Equipment: Power Supply: 3-phase (380V) Heating Time: Approx. 45 minutes Kjdpsz Szc Hsfx Anijdu Equipment: Heavy-duty work table, protective tissue/paper tensioning systems, and finished material take-up/rewind system. Easy to operate and maintain, engineered for long-term commercial use.

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): Kdsdjz Tdfgspfx Aniou On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 Kodpfx Ansz Hngmoiodu • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 1997, functionality: fully functional, input thermal power: 125 kW output thermal power: 99 kW Ksdpfx Aez Sam Esniodu heating capacity: 85,000 kcal/h fan motor power: 1.1 kW fan capacity: 6300 m³/h fuel: solid fuel of wood origin weight: 365 kg year of manufacture: 1997 voltage: 380 V CE marking

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete Aagaard/Finnrose industrial dust extraction and filtration system, manufactured in 2006, from a wood processing company. The system is designed as a screw filter and features a complete dust extraction control system including heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Under the discharge, there is a suitable hopper with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Kjdoz Ik Atopfx Aniedu Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6 m³ hopper on mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available by agreement Dimensions Filter tower including rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from the steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower including substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed by 31.07.2027 at the latest. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his expense and responsibility. All required specialists, lifting equipment, cranes, and means of transport must be organized by the buyer. Inspection possible by arrangement. Sale from the location in its current condition. Technical data provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 24,500 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. Kdedpjz S U Nasfx Aniju If you are interested or have any further questions, please do not hesitate to contact us.

Year of construction: 2025, condition: like new (used), From 20 to 100 degrees. 10 bar. Ref: H-603 Kodpfx Aoz R Aqcenisdu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Ksdpfx Anez Rxgyeiedu Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: used, Year of construction: 2011, functionality: fully functional, nominal heat output: 850 kW (1,155.68 HP), tank capacity: 7,350 l, Equipment: documentation/manual, hot water, type plate available, Hot water boiler system Polzenith 850 kW – Year of manufacture 2011 – fully functional For sale is a hot water boiler system from the manufacturer Polzenith, manufactured in 2011. The system is currently in operation and fully functional. It will be available from mid-2027. Technical data • Manufacturer: Polzenith • System type: Hot water boiler system • Machine type: 05.617 • Year of manufacture: 2011 Kdjdpo Aaz Ecofx Anisu • Rated thermal output: 850 kW (more depending on the fuel) • Water volume: 7,350 liters • Special function: LUVO 3 (oxygen control via lambda sensor) • Electrical connection power: 55 kW / 125 A • Electrical rated power: 58 kW / 120 A • Electrical documentation: available • Operating condition: fully functional, currently in operation • Overall condition: The system is in used condition, appropriate for its age. • Expected availability: from mid-2027 Scope of offer The following system components are included in the offer: • Hot water boiler • Chimney • Ash auger & scraper (without container) • Fuel feed system • Fuel bunker with four hydraulic slides • Pressure maintenance • Automatic make-up water supply Not included in the offer • External water storage tank • Dismantling of the system and all components • Transport and delivery Dismantling and collection The dismantling of all components will be carried out on site by the buyer. The handover of the system is expected to be possible from mid-2027 after prior coordination. Inspection and contact An inspection of the system is possible after prior appointment arrangement, as long as it is still in operation. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2020, operating hours: 27,008 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 16 kW (21.75 HP), overall weight: 8,000 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, hot water, type plate available, For sale: Viessmann Vitoflex 300-UF wood chip heating system (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with very low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating networks. The complete system includes: • Fine dust filter for particularly low-emission combustion. (Schräder exhaust technology Nat E-Filterbax-4-D300) • Automatic fuel feed. • Control cabinet and control system. • Professionally maintained – in very good condition. Kdodexvb Tbjpfx Aniou Technical data: • Manufacturer: Viessmann. • Model: Vitoflex 300-UF. • Power output: 216 – 720 kW. • Year of construction: 2020. • Operating hours: 27008 h. • Fuel: Wood chips. Additional information: • Complete technical documentation and maintenance records available upon request. • Dismantling and transport possible by arrangement. • Used system, sold as is, without warranty. Location: Netherlands. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0021-0023, power: 895 kW (1,216.86 HP), heating capacity: 895 kW (1,216.86 HP), temperature: 120 °C, pressure: 6 bar, Low-temperature heating boiler, Viessmann Vitoplex 100, 895 kW. Kjdoz T Unfopfx Aniedu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, power: 560 kW (761.39 HP), pressure: 6 bar, heating capacity: 560 kW (761.39 HP), temperature: 120 °C, Heating container, Viessmann Vitoplex, 560 kW, oil burner, heat exchanger. Kjdpfx Asz Umxxenisdu

Condition: used, Universal Temperature Control Unit Oil Advanced with electric heating and connections for external cooling. Oil temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE Type Advanced Oil D2-300-18-116 Mfg. No.: 151777 Year of manufacture: 2015 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 8 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating power 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply and return DN25 - G 1" Cooling water supply G 1/2" Cooling water return G 1/2" Connection power 23.5 kVA Control SCT standard - 7" touch display Mains connection 400 volts, 50 Hz, 32.7 amps - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) Kjdpfx Aj Aarfaonisdu - Temperature control - External cooling unit or external cooling circuit is required for cooling (cooling is achieved via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1125 x 395 x 1210 mm Weight 226 kg Good condition

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Kdsdpfx Asz Hw D Ueniju

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Ksdpfx Aoz Spgpsnisdu Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: new, Year of construction: 1988, For sale: a mobile industrial fan from the times of the GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), with a 0.75 kW motor from the USSR. Robust steel construction on wheels – ideal for dust extraction, blowing, local ventilation, or cooling machines. Technical specifications: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Maximum operating temperature: 35°C • Year of manufacture: not fully determined – probably 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Made in: USSR Kdjdpfx Aez Sb Dfsnisu Advantages: • Compact and mobile design • Efficient drive, ready for operation • Suitable for workshops, paint shops, ventilation, and burners.

Condition: used, Year of construction: 2006, Gas boiler, Viessmann Vitoplex 300 TX 3, year of manufacture 2006, output 1750 kW, including control system, including gas burner. The gas heating system is fully functional. Disassembly must be carried out by the buyer! Ksdpfx Anjvgcqyeiodu

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Kjdszi Hchjpfx Aniodu Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.