Used Sagita 4000 X 8 for sale (79,995)

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Dimensions: 4750 x 2250 x 1850 mm Weight: 12 t Blade gap adjustment Fedpfxeynglnj Ag Ajph ELGO backgauge Rear sheet support

Condition: excellent (used), Year of construction: 1999, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel: 0.5 - 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Motor-adjustable parallel stop: 1000 mm Programmable cutting gap adjustment Programmable cutting angle adjustment NC control: AMADA OPE1 Sheet metal holding function Motor power: 15 kW Fpsdpfx Aozcyn Ssg Ajh Dimensions (length x width x height): approx. 4800 x 2200 x 2150 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty. Fpedjywd Ndjpfx Ag Aoh

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Fpsdpfx Aeyg Ex Dog Aeh

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t Fedowwlt Repfx Ag Asph dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, workpiece weight (max.): 6,000 kg, The PORĘBA TPK-80/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available on stock, under power, ready for inspection Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 Fpjdpoy N R Iwjfx Ag Ajh - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm Fpodsy Nd Siepfx Ag Aoh turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt with base frame -Speed: 41 m/min -Belt width: 480 mm Fodoh Ak Ulepfx Ag Aoph -Conveyor length: approx. 4000 mm -Motor/transmission: SEW Vector, 0.55 kW / 110 rpm -Overall dimensions: 4540/730/H1090 mm -Weight: 300 kg

Condition: used, Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Fpodpfx Agsyarw Hs Aoh Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 45,600 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 8, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 45,600 mm, 8 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep Each with 2 bays, 2.7 m wide per bay Each with 3 beam levels, compartment load 3,000 kg - 24 frames (RM3511 - RAL5019) Fsdpfey Sxfvjx Ag Ajph - 48 base plates, leveling and fixing materials - 96 floor anchors (ZZBA1210) - 96 single beams (T2711 - RAL2008) - 8 load capacity signs (BSMcP) Frames bolted, not preassembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivery free site / assembly location - Unloading from the truck is performed by the buyer using their own lifting equipment - Deliveries throughout the territory of the Federal Republic of Germany, except islands! Deliveries to EU countries can be arranged individually.

Condition: new, GMN HSP150 x 381 9kW 800Hz 24000rpm 400V - HSK C-6 HF spindle / high-frequency spindle SN: 367488, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packaging and shipping! Fpsdpfxoy Nqaaj Ag Ajh

Condition: used, mileage: 21,815 km, power: 324 kW (440.52 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2018, Equipment: ABS, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 18.440 Fire Department 4x4 Magirus TLF 4000 * EZ: 01.03.2018 * 21,815 km * EURO 5 * Automatic * Wheel arrangement 4x4 * TLF 4000 * 10518 cc * 324 kW * Ringfeder trailer coupling * Rettbox charging connection * Empty weight: 11,230 kg Fedpom Ti Axofx Ag Aeph * Permissible total weight: 18,000 kg * Technically possible total weight: 21,000 kg * PROTEK monitor on the front of the bumper: Working pressure 200 PSI at 14 bar * Alco APF 2.5 -C -HH on the roof: 2,000 l/min, 16 bar * Magirus fire department body * Magirus fire extinguishing centrifugal pump * Teklite Floodlight mast TF440XB/4 * Tires: Conti Scandinavia HS3 front 385/65 R 22.5 14 mm & 14 mm * rear 315/80 R 22.5 12/14 mm & 13/13mm * Leader Mix 200-1000 v2 * TLF 4000 standard * Water tank: 4500 l * Foam tank 300 l * Second foam tank 200 l * 3 seats * Wheelbase 3.95 meters * ABS * ASR * German truck * 1 car owner * All information without guarantee * Further information and criteria on additional services * Repainting, retrofitting possible * Temporary license plate Customs license plate / License plate * Transfer and shipment possible / Transfer and shipment possible * Help with customs and export documents / Help with customs and export documents * Procurement of COC and EUR documents / Procurement of COC and EUR documents * On the market since 1991 / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to view and inspect a truck with us? You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 21,815 km, power: 324 kW (440.52 HP), first registration: 03/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2018, Equipment: ABS, all wheel drive, electronic stability program (ESP), navigation system, MAN TGS 18.440 Fire Brigade 4x4 Magirus * EZ:01.03.2018 * 21,815 km * EURO 5 * Automatic * Wheel formula 4x4 * TLF 4000 * 10518 cc * 324 kW * Ringfeder trailer coupling * Tires: Conti Scandinavia HS3 front 385/65 R 22.5 14 mm & 14 mm * rear 315/80 R 22.5 12/14 mm & 13/13mm * Wheelbase 3.95 meters * ABS * ASR * German vehicle * Ringfeder trailer coupling * Rettbox charging connection * PROTEK monitor on the front of the bumper: Working pressure 200 PSI at 14 bar * Alco APF 2.5 -C -HH on the roof / on the roof: 2,000 l/min, 16 bar * Magirus fire engine superstructure * Magirus fire extinguishing centrifugal pump * Teklite floodlight mast TF440XB/4 * Tires: Conti Scandinavia HS3 front 385/65 R 22.5 14 mm & 14 mm * rear 315/80 R 22.5 12/14 mm & 13/13mm * Leader Mix 200-1000 v2 * TLF 4000 standard * Water tank: 4500 l * Foam tank 300 l * Second foam tank 200 l * 3 seats * Wheelbase 3.95 meters * ABS * ASR * German vehicle / German truck Fjdpfx Aok Uub Usg Aoph * 1 vehicle owner / 1 car owner * All information without Guarantee * Further information and criteria on additional services * Repainting, retrofitting possible * Short-term license plate / Customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * We can repaint the vehicle in your desired color at a reasonable price and in good quality. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Fpjdezcxn Dopfx Ag Aoh Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: good (used), functionality: fully functional, Hydraulic Guillotine Shear SAGITA Working width: 2500 mm Shearing capacity: 5 mm Electric back gauge Foot pedal, machine feet Condition: Good, blades OK, cuts cleanly. Can be inspected under power. Fodpfx Aeyv Ikcsg Ajph Loaded free of charge from D -88433 Schemmerhofen.

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Fodpfxey Rvlks Ag Asph

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side Fpsdpfx Agsxl Ab So Ajh - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Fpsdpfx Aey I Iz Esg Ajh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), 4000 Insert grid 128 x 79.5 x 3cm Fodorxtd Tspfx Ag Aeph Used goods, very good condition, see pictures. Support bar height 30 mm Support bar thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiated price: € 25,-- net per piece Price from 70 pieces 22.50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: excellent (used), turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, turning diameter over bed slide: 870 mm, Geminis lathe model GE 870 with 4000mm between centers, swing over bed 870mm, swing over cross slide 580mm, swing over gap 1100mm, gap length 340mm, speeds from 13-1000rpm, spindle bore diameter 84mm, equipped with a 3-jaw chuck diameter 315mm, independent 4-jaw chuck diameter 800mm, fixed steady rest, the lathe is generally in very good condition. Fodpfxey Swmre Ag Aoph

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 17,000 mm, shelf height: 3,500 mm, number of shelf rows: 2, load capacity: 9,000 kg, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racking (2 x M35112711-2) Fjdpfx Ajy Hkxdeg Ajph Each 8.5 m in length, 3.5 m in height, 1.1 m in depth, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 footplates, baseplates, fastening material - 32 floor anchors (ZZBA1210) - 24 individual beams (T27114 - RAL2008) - 0 impact protectors / collision guards (ZRS40901) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - max. 20 working days after receipt of payment - Delivered free to site / installation location - Unloading from the truck is carried out by the buyer with their own lifting equipment - Deliveries are made within the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries are made by individual agreement.

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch Fodpfxst Ac D Us Ag Aeph - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: used, Max. turning diameter: 650 mm Fpjdpsvk T S Ajfx Ag Aeh Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5,7 ", working width: 4,000 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear The HGM B16-4000 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, machine manufacturing, and high-capacity sheet metal processing applications, offering a 16 mm sheet metal cutting capacity and a 4000 mm cutting length. It provides precise and efficient cutting thanks to the ELGO P40T touch-screen CNC control unit, automatic blade gap adjustment system, motorized back gauge system, and Rexroth hydraulic system. Standard Features Throat Depth: 250 mm Cutting Length: 4000 mm Distance Between Columns: 4580 mm Cutting Capacity: 16 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic calculation of blade gap, cutting angle, and pressure adjustment based on material Automatic cutting program Back sheet support system with RTS function Automatic Blade Gap Adjustment System Automatic calculation and adjustment based on the thickness of the sheet to be cut Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm Motorized NC Controlled Back Gauge on X-axis X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Protection System 1000 mm retractable front protection guard Fpedpszbqzyjfx Ag Ash Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) Premium Front and Rear Guarding Rexroth Hydraulic System Energy-Saving Standby Mode Optional Features Pneumatic Sheet Support System (Type 2 – 4-Position RTS Function) 4-position pneumatic support system Stable support for large-sized sheets Reduces sheet bending and deformation RTS (Return To Sender) function Increases operator comfort and safety Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Retractable Front Protection System Technical Specifications Cutting Capacity (450 N/mm²): 16 mm Cutting Capacity (700 N/mm²): 10 mm Cutting Length: 4000 mm Cutting Angle: 0.5° – 3.0° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 6 / 12 hpm Distance Between Columns: 4580 mm Table Height: 1010 mm Table Width: 700 mm Throat Depth: 250 mm Back Gauge Movement (X-axis): 1000 mm Machine Length: 5980 mm Machine Width: 3750 mm Machine Height: 2825 mm Oil Tank Capacity: 390 L Motor Power: 30 kW Machine Weight: 21.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5.7”, working width: 4,000 mm, cutting angle (min.): 2.1 °, stroke rate (min.): 15 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Key Advantages ✔ 13 mm sheet metal cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touchscreen NC control unit ✔ NC-controlled motorized back gauge system ✔ Program memory ✔ Automatic cutting program ✔ Two-speed cutting system ✔ Energy-saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear guard system ✔ Transfer table and ball bearing conveying system ✔ Shadow light cutting line ✔ Heavy-duty steel frame body Standard Features ELGO P40T 5.7” Touchscreen NC Control Unit 5.7” TFT touchscreen Manual operation mode Single-piece processing mode Program memory Up to 2 digital outputs Automatic angle, pressure, and blade clearance calculation based on material thickness Automatic cutting program Rear sheet support system control RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting function for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge System NC-controlled automatic X-axis movement 1000 mm travel distance 150 mm/sec speed ±0.05 mm positioning accuracy Steel frame body Hardened ball screw spindle Front Support Arms 1000 mm length Scale measurement system T-slot structure Retractable stop elements Retractable Front Finger Guard System 1000 mm retractable front guard cover Upper Blade 2 cutting edges 450 N/mm² material capacity Lower Blade 4 cutting edges 450 N/mm² material capacity Foot Pedal Custom-designed pedal with emergency stop function Simultaneously activates the pressure cylinders and cutting motion Rear Safety System (except CE) Model: EOS2E 2BX 2 laser beams Type 2 – SIL1 safety level 510 mm scanning height 3 ms response time IP65 / IP67 protection class Operating temperature: -30°C / +55°C 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Electrical Equipment Schneider or Siemens 400V / 50Hz CRONOSSTECH Premium Guard System Front and rear guard cabinets Wide viewing angle Ergonomic operation Professional industrial design Hydraulic System Rexroth hydraulic block Two-Speed Cutting System Two different cutting speeds High efficiency for short parts High-speed operation up to 60% of maximum cutting capacity Energy-Saving Standby Mode Optional Features Automatic Blade Clearance Adjustment System ELGO P40T touchscreen control integration Fpsdpfxszbqw Io Ag Ash Automatic blade clearance adjustment based on sheet thickness Pneumatic Sheet Support System Type 1 Dual-position system Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Size Retractable Front Guard System Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 4000 mm Cutting Angle: 1.8° Number of Pressure Cylinders: 18 Cutting Speed / High-Speed Mode: 9 / 15 hpm Distance Between Columns: 4310 mm Table Height: 930 mm Table Width: 660 mm Throat Depth: 250 mm Back Gauge Travel Distance (X): 1000 mm Machine Length: 5665 mm Machine Width: 3785 mm Machine Height: 2380 mm Hydraulic Oil Tank: 350 Liters Motor Power: 22 kW Machine Weight: 18.5 tons