Used Schunk Rota-M Flex 315 2+2 for sale (1,08,159)

Condition: excellent (used), Year of construction: 2019, overall weight: 63 kg, chuck outer diameter: 315 mm, Metal cutting Tooling SCHUNK - ROTA-M flex 315 2+2 MACH-ID 9634 Make: SCHUNK Type: ROTA-M flex 315 2+2 Year: 2019 Product Features: 4-jaw compensating chuck Centric compensation of opposing jaws Spindle mount: ISO 702-4 No. 8 (Z220) Jaw interface: 1/16" x 90° Nut 17H7 Technical Data: Stroke per jaw: 9.5 mm Compensation stroke per jaw: 5.1 mm Maximum clamping force: 100 kN Maximum torque: 120 Nm Maximum rotational speed: 2200 rpm Lredpfezcnn Tsx Ai Hsr Weight: 63 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Lrsdpfxjubbx Hj Ai Hsr Chuck diameter 850 mm Bore 270 mm Jaws are individually adjustable with many soft jaws in good condition.

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Lrjdpfx Aiezp Ik Ts Hsr

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, turning diameter: 420 mm, Used Mazak Quick Turn Nexus 350-2-M year 2004 max turning diameter Ø 420MM max turning length 1000MM 2 axes x/z, C axis, M-spindle The machine is well-maintained and was in production until 31-3-2026. Lrjdpfx Aijyzxtxj Hor

Condition: excellent (used), Year of construction: 2024, operating hours: 882 h, functionality: fully functional, machine/vehicle number: C-A3435F, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, table width: 600 mm, table length: 1,400 mm, space requirement width: 2,750 mm, space requirement length: 2,750 mm, space requirement height: 2,250 mm, input frequency: 50 Hz, 3-axis milling technology with maximum rigidity Lrsdpfxjy U D Tdo Ai Hor + InLine spindle with 10,000 rpm + Tool magazine for 24 tools + Chip tray + 3D data model + IoT connector and NETservice -Signal lamp, 4 colors Red: General malfunction Yellow: Machine intervention required Green: Machine in automatic mode Blue: Machine in setup mode

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Colour: Blue Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 Lsdpjztxnkjfx Ai Horr - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Helmerding Press Type: KDH 315/2100/2 Pressing force: 3,150 kN Stroke height: 40–200 mm Strokes per minute: 20–100 min⁻¹ Ram adjustment: 120 mm Shut height: 500 mm Table size: 2,000 x 1,200 mm Ram surface: 2,000 x 1,100 mm Machine weight: 44,000 kg Helmerding Roller Feeder Type: EWH 800/150 Strip width: 100–800 mm Strip thickness: 0.5–6.0 mm Helmerding Straightening Machine Lsdpfjzlpnrex Ai Hjrr Type: R-70/800/9-S Strip width: 100–800 mm Strip thickness: 0.5–5.0 mm Roll diameter: 70 mm Number of straightening rolls: 9 pcs Helmerding Decoiler Type: HE-4/800/MOT/HYD Strip width: 100–800 mm Max. coil weight: 4,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,000–1,600 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Ljdpfx Ajvw Upcei Hsrr Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Year of construction: 2010, condition: good (used), Power chuck for vertical and horizontal CNC lathes Manufacturer: SCHUNK, Type: ROTA NCO260, Year of manufacture: 2010 Diameter 260 mm with intermediate flange diameter 220 mm Spindle nose conforming to DIN 55028 / A6 Thread in draw rod: M24 N max: 4500 rpm Lodpfsikzy Dex Ai Horr In good condition. 2 units available. Price is per unit.

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control Lrsdpfeu H R Iwjx Ai Hor - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: ready for operation (used), Year of construction: 2004, Make: AXA Type of machine: VHC 2-4000 M/E Year of manufacture: 2004 Control system: Heidenhain TNC 430 Machine's weight: 19.500 kg Tool holder: SK 40 DIN 69871 A spindel speed: 6.000 U/min x-travel: 4.000 mm y-travel: 600 mm z-travel: 800 mm Speed range: 30–6.000 U/min Spindle lock: SK40 Operating time: 28.060 h Chip removal device: Ja Cooling system: Ja Tailstock: Ja (MK4, manuell) Chuck size: 400 mm (RTA 3-400) Traverse Z-axis: 800 mm Table dimensions: 4.440 × 600 mm Number of tools in the magazine: 36 Clamping assembly: SK40 3D Measuring probe: Ja (Renishaw MP10E) : Nein : Ja (Schwenkkopf ±90° / Teilung 1°) Ledpfx Ajzkr S Rji Horr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pulsotronic M-Pulse 2 Metal Detector with Conveyor Lrsdpfx Aijyr S Nme Hsr Brand: Pulsotronic-Anlagentechnik GmbH Type: M-Pulse 2 BD-HD 350x150 LPW MFT Year of manufacture: 2018 Serial number: 90007273 Voltage: 115/230 VAC Frequency: 50-60 Hz Detection opening dimensions: 350 x 120 mm Belt width: 240 mm Overall dimensions: 3500 x 900 x 1300 mm The Pulsotronic M-Pulse 2 metal detector is an advanced quality control system from 2018, essential for ensuring food safety in production processes. The device is designed for precise detection of metallic contaminants in products transported on the integrated belt conveyor. With a detection opening of 350 x 120 mm and a robust stainless steel construction, the system is perfectly suited for the food industry, guaranteeing maximum detection sensitivity and easy maintenance of hygiene.

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Lodpfx Aijy I Ac Ds Horr

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Lodpfeyaihvex Ai Hjrr Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotational tool changer for versatile punching • High precision and repeatability • User-friendly cnc control • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction • Automated sheet clamping for consistent results • Suitable for batch and small to medium production runs

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Ledpfsrfww Nsx Ai Hsrr

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Ledpfx Aezlt N Hei Hjrr

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Ledpfx Aszrhhqei Herr

Year of construction: 2025, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM Lodpfxsyvhp Ss Ai Horr HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN

Condition: repair required (used), Year of construction: 2008, functionality: not functional, operating hours: 20,000 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 850 mm, cutting width (max.): 1,000 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 15 rpm, total height: 3,200 mm, total length: 5,700 mm, total width: 3,900 mm, overall weight: 20,000 kg, table height: 800 mm, year of last overhaul: 2021, Equipment: CE marking, rotational speed infinitely variable, PEGAS 850×1000 GOLEM 2M – Heavy-Duty Double Column Band Saw for Custom Rebuild The PEGAS 850×1000 GOLEM 2M is an extra heavy-duty double column band saw designed for cutting large steel sections, plates and profiles. This machine is offered as a base machine for individual rebuilding or modernization, making it an excellent project for companies wishing to install their own control system, drives and automation. A comparable new PEGAS-GONDA 850×1000 GOLEM machine is currently offered at approximately EUR 250,000, providing an excellent opportunity to build a high-capacity industrial saw at a significantly lower investment. Machine Status Base machine for custom rebuild Mechanical structure in good condition Without electrical installation Without drive motors and control system Ideal for retrofit, CNC conversion or special applications Main Features Heavy-duty double column construction Cutting capacity: 850 × 1000 mm Large 1 × 2 m work table Horizontal and vertical cutting capability Rigid industrial frame Designed for heavy steel fabrication and oversized workpieces Year of manufacture: 2008 Suitable for Steel fabrication companies Lsdpfx Ajzhndkji Horr Machine rebuild specialists OEM projects Heavy engineering Custom automation and retrofit applications This machine provides a robust mechanical platform for building a high-performance industrial band saw tailored to individual production requirements. Its massive construction and large cutting capacity make it an excellent alternative to purchasing a new machine.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Control system Siemens Sinumerik ONE, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Tool changer with 24 positions, Linear axes X/Y/Z 24 m/min Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor Renishaw probing system kit Coolant spray gun Enclosure roof Internal high-pressure cooling 20 bar, Bed flushing via M-function Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator, Ø 150 mm, 4th axis package, -Rotary table Lehmann, type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation Software preparation for Rotary table machining lRACYL software for surface machining Tilting cycle (Cycle 800) Holding torque spindle clamping: 800 Nm Max. speed: 65 rpm, Center height 150 mm, Rotary table positioned along the X-axis on the right side of the work table, Manual chuck (three-jaw), diameter 160 mm, Tailstock, manual, for NC rotary table, stroke: 40 mm, center height 150 mm, Tropical package, Active cooling unit for control cabinet, Compressed air, external and internal (through spindle center), can be activated via M-function, External electronic handwheel, Software option - DXF import, Lodpfx Aoza Alusi Hsrr Machine with 1800 spindle hours.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Lodpfx Ajza Apaei Herr Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa Lrodezcpwijpfx Ai Hjr • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction Ljdpfx Aozcppxoi Hjrr • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar Lsdpfezcptwsx Ai Hsrr • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Ljdpey Ulm Eefx Ai Horr