Used Sket / Mill Multiple Wire Drawing Machine - Dry for sale (68,529)

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Lhsdpswi Tidefx Abyjh Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 Ljdpfxjwi S Ixj Abyshh diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. Lodpoyubh Rofx Abyshh The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Lhodpfx Aer Nfvmobysh Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Ledpfey N Df Nex Abyjhh

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Lhedpfx Abeyxxy Hoyeh

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Lhjdpot Ixkzjfx Abyoh

Condition: good (used), Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Ljdpsytr Sdefx Abyshh Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed Ledpfoy R Ewpex Abyehh • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Ledpfx Asq Nx Aljbyohh Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867 Lsdpey N Ak Rofx Abyohh

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Lhsdpfx Abey R Srgeyoh Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Lhedpfsyzf Najx Abyoh Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, New 2013 Ledpfxeyhdi Rs Abyjhh Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Lhjdpfx Abszcxwreysh Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Ljdpfx Aezdfgpsbyjhh Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Lsdezcqncepfx Abyshh Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons Lhsdpfoyf A H Nox Abysh

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. Lhjdpfx Ajzfgmxobysh The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Condition: used, Year of construction: 2008, functionality: fully functional, Elumatec 130 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. Travel distance X-axis: 4200 mm Max. travel Y-axis: 480 mm Max. travel range Z-axis: 325 mm Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Bidirectional angle head and a high-speed spindle Wrench measurement 8 pneumatic material clamps Lsdpfey U Dtqjx Abyehh Light barrier Very good condition

Condition: used, Year of construction: 1999, x-travel 1250 mm Lhsdpfxsy Ty R Aj Abyoh y-travel 850 mm z-travel 800 mm Control Heidenhain MillPlus

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm z-travel 400 mm Control Siemens 840 D total power requirement 84 kW weight of the machine ca. 19 t Lhedpey S Eczsfx Abyjh dimensions of the machine ca. 7,9 x 6 x 2,7 m

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: Lhjdpew Uab Njfx Abyoh • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. Lhsdov T Ttfepfx Abyeh - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: used, functionality: fully functional, type of input current: three-phase, spindle diameter: 30 mm, table width: 1,070 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 3,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm Lsdpfx Asw Ip Dmsbyjhh – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg