Used Support Sander for sale (12,655)

Condition: used, Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device Kdodpod N D Ddofx Ac Nel -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Condition: ready for operation (used), Year of construction: 2003, Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible. Kdedjuyk N Uepfx Ac Nol

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Kdedjp I I U Djpfx Ac Nel Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: reconditioned (used), functionality: fully functional, Manufacturer: Sander Ksdpfxjttwpbo Ac Nsdl Type: Vario Master Model: 9480 Passage height of the pallet: approx. 2200 mm Pallet passage width: max. 1300 mm Bayonet position from the floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V The machine is installed in our workshop and technically overhauled. We are selling a fully functional machine.

Condition: used,

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Ksdpfx Aoq E Ti Hec Njdl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18.03.7507, grinding width: 1,100 mm, grinding height: 150 mm, grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, roller diameter: 150 mm, TECHNICAL DETAILS Maximum sanding width: 1,100 mm Maximum sanding height: 150 mm Abrasive belt length: 1,900 mm Abrasive belt width: 1,100 mm Roller diameter: 150 mm Max. working width: 1,100 mm Min. working height: 3 mm Max. working height: 152 mm Min. feed speed: 2.5 m/min Max. feed speed: 8 m/min Feed motor: 0.55 kW Feed speed regulation: Stepless MACHINE DETAILS Motor: 11 kW (15 HP) Voltage: 400 V Power consumption: 28 A Fuse: 32 A Output: 15.6 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,800 x 2,200 mm Kjdey Nx Dyopfx Ac Njdl Transport weight: 1,500 kg EQUIPMENT Sanding unit COMBI Pad sanding unit (position: top) Roller material: Rubber CE marking

Condition: good (used), SCM Sandya Uno Wide Belt Sander Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Kodpfx Acoy Sr Rrs Njdl Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, Bütfering wide-belt sanding machine Optimat SCO 413 RQEE 4-head machine with a texturing brush - 10.4-inch color touch screen with 1,000 memory locations Kedpfxoy S S S Aj Ac Nsdl - Working width 1,350 mm - Workpiece thickness 3-160 mm - Belt width 1,370 mm - Belt length 2,620 mm - Cross belt width: 150 mm - Cross belt length 4,700 mm - Feed speed 2.5-13 m/min - Constant workpiece infeed height 900 mm - 1st unit - Type R - Calibrating roller unit with belt grit compensation, drive 22 kW - 2nd unit - Type Q - Cross-sanding unit with pressure pad belt, electronically controlled segmented pressure beam, element width 25 mm, drive 13 kW - Belt blowing device, workpiece-controlled - 3rd unit - Type E - Electronically controlled segmented pressure beam in a compact design, element width 25 mm, drive 12.5/16 kW - Belt blowing device, workpiece-controlled - 4th unit - Type E - Electronically controlled segmented pressure beam in a compact design, element width 25 mm, drive 12.5/16 kW - Belt blowing device, workpiece-controlled - Texturing unit with Anderlon brush (grit K 80), pneumatically controlled, with 5.5 kW drive motor - Workpiece cleaning with rotating finishing brush at the machine's outfeed, including extraction hood with connection Dm 140 mm - Vacuum clamping device, drive motor 7.5 kW - ARE - retractable workpiece support roller at the infeed The machine received a new belt 4 years ago. The machine has been completely cleaned, 4 new spindle covers, frequency converter new, wear parts new. The machine is in very good condition.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine Kjdpfx Acjy R A H Is Nodl – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6929 TECHNICAL DATA - Workpiece length: 2800 mm - Workpiece width: 950 mm Kedpfx Ajy R A Dtjc Nsdl - Main motor: 5.5 kW - Fan motor: 2.2 kW - Sanding belt width: 160 mm - Extraction port diameter: 185 mm - Right/left rotation - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approx. 1000 kg ADVANTAGES – Not repainted – German manufacture – DTR technical documentation – Used sander, very good condition Net price: 8,900 PLN Net price: 2,120 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (The price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: Ksdpfx Asy R A Acoc Nodl - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Kündig Premium-1 1100 K Quality product made in Switzerland Constant Table Machine / Automatic Head Positioning Wide Belt Calibration and Fine Sanding Machine Combination unit with grooved rubber contact roller of proven hardness Contact roller height adjustable steplessly according to grit scale Pneumatic lifting/lowering of contact roller Pneumatic sanding pad with quick-change glide plate and precision pressure regulator Spring-loaded, ground steel pressure roller at infeed Rubber-coated pressure roller at outfeed Sanding belt drive motor power: 11 kW Working width: 1100 mm Maximum workpiece pass-through height: 200 mm Feed speed: 3–15 m/min, steplessly adjustable Automatic workpiece thickness setting ENORMATIC quick adjustment with feed activation (for long workpieces) PLC control with touch screen and teach-in memory for automation and management of all working programs Infeed and outfeed tables with roller support Machine is workshop-tested and in VERY GOOD CONDITION Kjdpfx Acjy R Ruae Njdl First delivered in 2016 from a training workshop / on retirement Available from stock in Lieboch

Condition: excellent (used), Catalogue number 7431 TECHNICAL DATA - Max workpiece width: 950mm - Max workpiece height: 150mm Top: - Metal pressure roller - Unit (profiled rubber roller for calibration + pad shoe + metal roller) - Smooth, metal sliding roller Bottom: - Feed belt - Pneumatic oscillation of belts with photocells - Electric table lifting - 2 feed speeds - Main motor: 7.5 kW - Feed motor: 0.6 kW - Table lifting motor: 0.18 kW - Working pressure: 8 bar - Extraction connection diameter: 150mm - Dimensions (L/W/H): 1600x1250x2000mm - Weight: 1109 kg ADVANTAGES – German manufacturing Kodpfx Acoy Rtalj Nsdl – Additional pad shoe included – Used sander, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar Kdedpey Rrznefx Ac Njl - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7037 TECHNICAL DATA - Workpiece length: 2780 mm - Workpiece width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Fan - Forward/reverse rotation - Electrical table height adjustment (up/down) - Extraction port diameter: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm - Weight: 502 kg ADVANTAGES – Not repainted – With fan – Electric table adjustment – Used sander, very good condition Net price: 9500 PLN Net price: 2260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change) Kdodjy Rrx Hspfx Ac Njl

Condition: used, Bütfering ECO 111 Electronic Wide-Belt Calibration and Fine Sanders Contact roller unit 85 SH CPS electronically controlled segmented pad Working width 1100 mm Terminal for various operating programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is FULLY REFURBISHED and in TOP CONDITION Available ex-stock Lieboch Kodsy Rzf Aspfx Ac Nodl

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring steel contact roller and electronic CPS segmented pressure beam with 25 mm divisions Kodjwka Snepfx Ac Njdl - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt air-blast device - Vacuum conveyor belt with blower Control: - Terminal with 50 program memory slots - Simple menu guidance with plain text display - Visual indication of active elements during operation - Fully automatic PLC-controlled start sequence for all drives - Digital recording of operating hours Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction connectors: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air requirement: 10 l/min Weight: 2,200 kg Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Kedpsx Twcpofx Ac Nodl

Condition: used, Year of construction: 2006, Working width: 1100 mm Sanding belt dimensions: 1120 x 1900 mm Height: 1890 mm Length: 1335 mm Pass-through height: 3 - 150 mm Feed speed: 2.5 - 13 m/min. Extraction capacity: 1830 m³/h Extraction connection: 1x 180 mm Compressed air: 6 bar Drive motor: 15 kW Total connected load: 17 kW Weight: approx. 1500 kg Kjdpfxey Dd Nds Ac Nedl Storage location: Supplier

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Kedpjiuvxbsfx Ac Njdl Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: used, Year of construction: 1993, functionality: fully functional, Manufacturer: Sandingmaster (Holland) Model: SCSB3-1300 Year: 1993 Material: solid wood panel Working width 1300 mm Working height 150 mm Motor contact roller 25 HP Motor fine sanding pad 15 HP Kdjdpfx Acsxwwkrs Nel Feed motor 1/1,75 HP Feed speed 7 and 14 m/min 23 and 46 ft/min Standard hardness contact roller 80° shore Dimensions sanding belts 1900 x 1330 mm Weight ~4000 kg

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen Ksdpfottu Sgex Ac Njdl ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: excellent (used), Enorm Duo 1100 Two-Belt Wide-Belt Sander - Year of manufacture: 1991 - 18.3 kW - 400 Volts Kjdpfx Ajy Tmk Asc Njdl - Roller/Combination unit - Brush - Working width: 1100 mm - Workpiece thickness: 3-160 mm - Feed rate, stepless - 6-25 m/min - Belt in good condition - Air consumption: 3 l/min - 6 bar - Weight: 2520 kg - Front infeed rollers - Table dimensions: 2340 x 1420 x 1920 mm

Condition: like new (used), Roller support, movable, for long profil Kdedpeh T Uxwefx Ac Nel