Used Surface Finishing for sale (8,985)

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is Hodpfszpxwdjx Abtot supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Year of construction: 2018, condition: like new (used), OTEC Special Purpose Machine SF 170/270/1000 for Camshaft Bearings For sale is an OTEC special purpose machine for the machining and surface finishing of camshaft bearings. The system is suitable for machining both short and long camshaft bearings and has been designed for industrial series applications. Technical data: Manufacturer: OTEC Machine type: SF 170/270/1000 Application: Machining and surface finishing of camshaft bearings Machine dimensions: • Length: approx. 2,586 mm • Width: approx. 798 mm • Height: approx. 1,785 mm • Loading height: approx. 920 mm Weight: • Machine weight: approx. 1,200 kg • Transport weight: approx. 1,400 kg Electrical connection data: • Voltage: 3 x 400 V • Frequency: 50/60 Hz • Fuse rating: 32 A • Connected load: 12.5 kVA • Max. power consumption: 10 kW Compressed air connection: Hjdpfxezb Abxo Abtot • Operating pressure: 6 bar • Connection: DN 7.2 (R 1/4”) Water connections: • Inlet: 3/4” (Ø 16 mm) • Outlet: 1 1/4” (Ø 31 mm) Workpiece dimensions: Long camshaft bearing: • Length: approx. 177.5 mm • Inner diameter: approx. 89 mm Short camshaft bearing: • Length: approx. 89 mm • Inner diameter: approx. 89 mm Special features: • Robust industrial design • Compact footprint • Automated machining process • Suitable for series production • Integrated media connections for compressed air and water Location: Germany Inspection possible by appointment.

Condition: good (used), Year of construction: 2011, Heated surfacefinishing machine Hjdpjfndpnsfx Abtst for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: new, Year of construction: 2026, max. working width: 1330 mm Hjdpfex S Dwqjx Abtjt workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:3 station variants:1st station: Sanding belt2nd station: Brush elements3rd station: Sanding belt Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. Hjdpsl Dw D Ejfx Abtjt With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Hjdpszwvb Aofx Abtot Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: Hedpsxqzmkofx Abtot - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. Hjdeyt Nm Espfx Abtjt At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: new, BRAND NEW HYDRAULIC SURFACE GRINDING MACHINE WITH INDUCTION MAIN MOTOR Hsdpfezupq Ejx Abtet "Your Next Reliable Production Machine Starts Here"

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions. Hedpfx Aezwk H Hsbtst

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We offer this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW Hjdpfxszhbd Ro Abtot If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard Hsdpfx Ajzmhknsbtjt • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW Hodpfx Abezubtletot • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design Hsdpfezb Ab Esx Abtet • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Hjdpszt R E Ujfx Abtjt With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Hjdpfew Ixw Asx Abtet Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: like new (used), JBT Industrial Finisher / Refiner – Stainless Steel JBT industrial finisher in stainless steel, designed for the continuous refining of pulps, purees, and food products, allowing the separation of the usable fraction from peels, seeds, coarse fibers, and other undesired solids. This type of equipment is typically used after crushing, extraction, or preheating operations to obtain a product with a finer and more homogeneous texture before subsequent stages of concentration, heat treatment, or packaging. The system operates using an internal rotor and a perforated sieve or screen, performing continuous mechanical separation between the refined product and solid waste. MAIN FEATURES Hodpfx Aeyz Ttmebtet -Manufacturer: JBT -Type: Industrial finisher / refiner -Application: refining and separation of pulps -Automatic and continuous processing -Rotary refining system -Internal separation sieve / screen -Solid-liquid / pulp-waste separation -Continuous product feed -Independent product and waste discharge -Construction primarily in stainless steel -Driven by an electric motor -Closed processing chamber -Robust design for industrial operation -Access for cleaning and maintenance -Integrable into continuous processing lines PROCESS The product, previously crushed or processed, enters the JBT finisher continuously. Inside, the rotor drives the product against a perforated refining surface. The pulp, puree, or liquid fraction that meets the required size passes through the screen, while larger particles remain retained and are conveyed to a separate discharge. This process allows operations such as: Refining of pulps and purees Separation of peels and seeds Removal of coarse fibers Reduction of undesired solids Homogenization of the texture Preparation of product before concentration Pre-treatment prior to aseptic sterilization APPLICATIONS Especially suitable for tomato industries, fruit and vegetable processors, juice, pulp, puree, concentrate, and sauce manufacturers. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. It can be integrated with crushers, preheaters, pumps, evaporators, aseptic sterilizers, and fillers. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Hjdewmm U Uepfx Abtot

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Hsdpezv T I Dofx Abtst

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Hodszpvbyjpfx Abtst Year: 2002 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1360 mm Torus Ø: 430 mm The inner deburring surface is in damaged condition. The damage is shown in the photos.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Hodpfsyak Dlsx Abtst Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: new, Year of construction: 2026, functionality: fully functional, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features * Mitsubishi PLC touchscreen control * Electronic handwheel * Moving column construction * Hardened and ground guideways * Durcite-B guideway coating * High grinding accuracy * Hydraulic table drive * Heavy-duty cast-iron construction * CE certified Standard Equipment * PLC touchscreen control * Electronic handwheel * Grinding wheel * Wheel flange * LED work light * Electromagnetic chuck * Balancing stand * Balancing arbor * Safety guards * Demagnetizer * Coolant system * Diamond dresser * Machine feet * Central lubrication * Tool kit Included Equipment * Magnetic separator with paper filter * Full machine enclosure * Parallel dressing device * Dust extraction system * 2-axis digital readout (DRO) * Integrated magnetic chuck controller * 6 kW frequency inverter * Diamond dresser * Additional wheel flange Technical Specifications * Model: SGC512AHD * Brand: MTP * Table size: 500 × 1200 mm * Magnetic chuck: 500 × 1200 mm * Longitudinal travel: 1140 mm * Cross travel: 540 mm * Maximum spindle-to-table distance: 570 mm * Maximum workpiece weight: 800 kg * Grinding wheel: 350 × 20–40 × 127 mm * Hydraulic table speed: 5–25 m/min Hsdpfx Abey Hr Uyetot * Spindle motor: 5.5 kW * Spindle speed: 1440 rpm * Hydraulic motor: 2.2 kW * Vertical feed motor: 0.75 kW * Machine dimensions: 3550 × 2250 × 2530 mm * Machine weight: approx. 5200 kg Applications * Tool rooms * Manufacturing plants * Metalworking workshops * Precision grinding of tool steel, structural steel and cast iron * Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. Hsdpfx Aoy Ai Ehebtot The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 Hjdpfxszgw D Rs Abtjt If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, MYS820 200×480 Magnetic Surface Grinder is an advanced machine designed for precision grinding of small and medium-sized metal components. Its compact design and modern technologies ensure high machining accuracy and reliable operation in industrial environments. Main advantages of the MYS820 200×480 magnetic surface grinder The MYS820 200×480 magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as automatic feed in two axes and precision guideways with a robust construction, ensuring reliability and efficiency. Its compact dimensions (1680 × 1140 × 1800 mm) and weight of 800 kg make it an excellent choice for smaller workshops and production facilities with limited space. Key benefits include: High grinding precision – precision guideways and automatic feeds enable machining accuracy of 0.01 mm in vertical movement, ensuring excellent surface finish quality. Hjdpfx Abeycr R Setjt Compact working area – a 400 × 200 mm table is ideal for processing small and medium-sized components, increasing application versatility. Smooth automatic feed system – two-axis automatic feed provides precise movements with a maximum longitudinal travel of 530 mm and transverse travel of 220 mm, ensuring efficient machining. Stability and durability – the massive 800 kg construction minimizes vibrations, ensuring stable operation during intensive use. Easy maintenance – centralized lubrication of guideways reduces manual maintenance requirements and extends machine service life. Ready for operation – equipped with digital readout and fully prepared for immediate production, minimizing downtime. Machine design and technology Robust construction and precision components The MYS820 200×480 magnetic surface grinder features a heavy-duty 800 kg structure that provides excellent stability during machining. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishing. The spindle, driven by a 1.1 kW motor, operates with a grinding wheel measuring 200 × 19 × 32 mm, allowing efficient processing of various materials. Advanced feed system The machine is equipped with automatic feed in two axes, providing: maximum longitudinal travel: 530 mm maximum transverse travel: 220 mm The precise transverse feed per handwheel rotation is 2.5 mm, while the vertical feed is 1.25 mm, allowing accurate adjustment of machining parameters to specific requirements. Technical specifications Parameter Value Table dimensions 400 × 200 mm Maximum longitudinal travel 530 mm Maximum transverse travel 220 mm Spindle-to-table distance 490 mm Grinding wheel dimensions 200 × 19 × 32 mm Manual transverse feed 2.5 mm/rev Manual vertical feed 1.25 mm/rev Spindle speed 2850 rpm Motor power 1.1 kW Machine dimensions 1680 × 1140 × 1800 mm Weight 800 kg